NXP® solutions power next-generation digital stethoscopes, which filter and amplify cardiac signals and then display chart results in a graphic interface. These improvements help doctors make more accurate diagnoses.
NXP offers 8-bit and 32-bit ultra-low-power MCUs with the ability to drive an LCD display—ideal for improving portability of digital stethoscope designs, as well as for more challenging applications like fetal heart rate monitors.
Speed development time when designing your portable medical device with Our Healthcare Analog Front End (AFE) reference platform which includes a complete hardware platform, schematics and software. Based on the Kinetis Microcontroller K53 measurement.
|Kinetis® K1x Mainstream Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core||32-bit ultra-low-power, FPU, touch-sensing interface|
|Kinetis® K3x Segment LCD Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core||Low-power segment LCD controller, supports up to 320 segments, compatible with Kinetis K1x MCU family|
|Kinetis® K4x USB & Segment LCD Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core||MCU with ARM® Cortex™-M4 Core, 512K flash, USB, segment LCD|
|Kinetis® K5x Measurement Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core||Integrated OPAMPS, TRIAMPS, USB, Ethernet and segment LCD controller|
|Kinetis® KL1x-48 MHz, Mainstream Small Ultra-Low Power Microcontrollers (MCUs) based on ARM® Cortex®-M0+ Core||Up to 256 KB flash with 64 byte flash cache and up to 32 KB RAM; Up to 16-bit ADC with configurable resolution, Compatible with KL2x, KL3x and KL4x|
|Kinetis® KL3x-48 MHz, Segment LCD Ultra-Low-Power Microcontrollers (MCUs) based on AR®M Cortex®-M0+ Core||Compatible with KL1x, KL2x and KL4x, Next-generation 32-bit ARM Cortex™-M0+ core: 2x more CoreMark/mA than the closest 8/16-bit architecture|
|Kinetis® KL4x-48 MHz, USB, Segment LCD, Ultra-Low-Power Microcontrollers (MCUs) based on ARM® Cortex®-M0+ Core||Compatible with KL1x, KL2x and KL3x, Single-cycle fast I/O access port facilitates bit banging and software protocol emulation, maintaining an 8-bit “look and feel”|
|Audio Power Amplifier|
|Smart Power Amplifier||Low Noise: 27 uV @ normal gain mode; 19 uV @ low gain mode|
|Stereo Smart Audio Amplifier||2x3.2W Class-D audio amplifiers with 9.5V boost voltage|
|Smart Audio Amplifier||Sample frequencies from 8 kHz to 48 kHz supported in I2S mode and 16 kHz to 48 kHz in PDM mode|
|Audio Amplifiers for Portable Devices||More Audio Amplifiers to start your design.|