TEA2016 Application Subjects

About This Training

The TEA2016 has settings that can be used for optimizing performance or analyses. A video shows and explains how to use setting functions for an application subject.

What You Will Learn

• 1 | BM ECincrease and min Cycles
  • Learning the effect on behavior and performance of the ECincrease and min cycles
• 2 | BM ECincrease Transition and Efficiency
  • Learning how the ECincrease function can be used to increase efficiency in Burst Mode and how it affects the behavior
• 3 | Checking SNSCAP Divider with Power Limit Function
  • Learn how the power limit setting works
  • Learn how to check for a correct SNSCAP divider design
  • Example for how a setting can be used to verify correct circuit behavior
• 4 | Increase Efficiency at Low Load
  • Learn which settings can be used to increase efficiency at low load
  • Observe the effect of a setting on efficiency and possible positive or negative side effects
• 5 | LLC Soft Start Stop
  • Learn how to define the soft start and soft stop with the available set of settings
  • What should be the signal shape for improvement
• 6 | LLC Startup
  • Learn the setting functions that define the LLC startup behavior
  • Observe the effect of each setting
• 7 | LP nr Peaks and Dump
  • Get familiar with the settings related to Low Power mode operation
  • Observe the change in behavior by a setting
  • Advise on how to use the settings
• 8 | Safe Restart or Latched Protection Follow Up
  • Learn the available options by settings for defining the behavior after protection
  • Observe the behavior by different setting examples