The ALVCHS162830 address driver is designed for 2.3 V to 3.6 V VCC operation.
Diodes to VCC have been added on the inputs to clamp overshoot.
The bus hold feature retains the inputs? last state whenever the input bus goes to high impedance. This prevents floating inputs and eliminates the need for pull up or pull down resistors.
The outputs, which are designed to sink up to 12 mA, include equivalent 26 Ohm series resistors to reduce overshoot and undershoot.
To ensure the high-impedance state during power up or power down, the output-enable (OE) input should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The 74ALVCHS162830 is characterized for operation from -40 to +85 Cel.
| Type number | North American Type number | Ordering code (12NC) | Product status | Package | Packing | Marking | Chemical content | Leadfree conversion date |
|---|---|---|---|---|---|---|---|---|
| 74ALVCHS162830DGB | ALVCHS162830GB | 9352 702 64112 | Volume production | SOT647-1
(TSSOP80) | Tube | Standard Marking | 74ALVCHS162830DGB
| week 49, 2005 |
| 74ALVCHS162830DGB | ALVCHS162830GB-T | 9352 702 64118 | Volume production | SOT647-1
(TSSOP80) | Reel Pack, SMD, 13" | Standard Marking | 74ALVCHS162830DGB
| week 49, 2005 |
| Type number | Ordering code(12NC) | Indicative price/unit($) | Region | Distributor | In stock | Inventory date | Buy online | Samples |
|---|---|---|---|---|---|---|---|---|
| 74ALVCHS162830DGB | 9352 702 64112 | 1.7700 | not available | |||||
| 74ALVCHS162830DGB | 9352 702 64118 | 1.7700 | Order samples |
Support Documents
| Type number | Package | Description | Propagation Delay(ns) | Voltage | No. of Pins | Power Dissipation Considerations | Logic Switching Levels | Output Drive Capability |
|---|---|---|---|---|---|---|---|---|
| 74ALVCHS162830DGB | SOT647-1
(TSSOP80) | 2.5/3.3V 18-Bit to 36-Bit Address Driver with Bus Hold (3-State) | 2~4 | Low | 80 | Low Power or Battery Applications | TTL | Low |
74ALVCHS162830 links to the similar products page containing an overview of products that are similar in function or related to the type number(s) as listed on this page. The similar products page includes products from the same catalog tree(s), relevant selection guides and products from the same functional category.
The information published on product information pages of the www.nxp.com or www.semiconductors.com websites is an extract from product data sheets and is for information purposes only. For detailed information please check the most recent version of the relevant product data sheet as published on these websites. In the event of any conflict between product information pages and data sheets or deviations from information provided in the product data sheets on these product information pages, the information provided in the product data sheets shall prevail.
The product status of the product(s) described in the product data sheet may have changed since publication of the data sheet and therefore information in datasheets on product status may be outdated. The latest information on product status is published on the product information pages of the above-mentioned websites.
As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors, which will be used in future data sheets together with new contact details. In data sheets where the previous Philips references remain, please use the new links as shown below.
The copyright notice at the bottom of each page (or elsewhere in the document, depending on the version)
- © Koninklijke Philips Electronics N.V. (year). All rights reserved -
is replaced with:
- © NXP B.V. (year). All rights reserved.-
If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or phone (details via salesaddresses@nxp.com). Thank you for your cooperation and understanding.