74F175A

General description

The 74F175A is a quad, edge-triggered D-type flip-flop with individual D inputs and both Q and Q outputs. The common buffered Clock (CP) and Master Reset (MR) inputs load and reset (clear) all flip-flops simultaneously.

The register is fully edge-triggered. The state of each D input, one setup time before the Low-to-High clock transition is transferred to the corresponding flip-flop?s Q output.

All Q outputs will be forced Low independently of clock or data inputs by a Low voltage level on the MR input. The device is useful for applications where both true and complementary outputs are required, and the CP and MR are common to all storage elements.

Features

• Four edge-triggered D-type flip-flops
• Buffered common clock
• Buffered asynchronous Master Reset
• True and complementary outputs
• Industrial temperature range available (-40 Cel to +85 Cel)
• PNP light loading inputs

Block diagrams/pinning

Technical documents

Application Notes

AN2021_1; Thermal considerations for FAST logic products (13-Mar-95)

AN202_1; Testing and specifying FAST logic (01-Jun-87)

AN203_2; Test Fixtures for High Speed Logic (02-Apr-98)

AN216_2; Arbitration in shared resource systems (18-Jul-88)

Print / Email

• Print this information
• Email this information

Disclaimer

The information published on product information pages of the www.nxp.com or www.semiconductors.com websites is an extract from product data sheets and is for information purposes only. For detailed information please check the most recent version of the relevant product data sheet as published on these websites. In the event of any conflict between product information pages and data sheets or deviations from information provided in the product data sheets on these product information pages, the information provided in the product data sheets shall prevail.

The product status of the product(s) described in the product data sheet may have changed since publication of the data sheet and therefore information in datasheets on product status may be outdated. The latest information on product status is published on the product information pages of the above-mentioned websites.

As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors, which will be used in future data sheets together with new contact details. In data sheets where the previous Philips references remain, please use the new links as shown below.

http://www.philips.semiconductors.com use http://www.nxp.com

http://www.semiconductors.philips.com use http://www.nxp.com (Internet)

sales.addresses@www.semiconductors.philips.com use salesaddresses@nxp.com (e-mail)

The copyright notice at the bottom of each page (or elsewhere in the document, depending on the version)
- © Koninklijke Philips Electronics N.V. (year). All rights reserved -
is replaced with:
- © NXP B.V. (year). All rights reserved.-

If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or phone (details via salesaddresses@nxp.com). Thank you for your cooperation and understanding.