NXP Semiconductors


Select site:

English

Datasheet

SA616
(Product Specification)
07-Nov-97, 17 pages, 169 kB

Download all documentation

Low-voltage high performance mixer FM IF system

General description
Features
Products/packages
Chemical content
Pricing/ordering/availability
Samples
Applications
Block diagrams/pinning
Technical documents
Parametrics/similar products
Print/email

General description

The SA616 is a low-voltage high performance monolithic FM IF system incorporating a mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector, logarithmic received signal strength indicator (RSSI), voltage regulator and audio and RSSI op amps. The SA616 is available in 20-lead SSOP (shrink small outline package).

The SA616 was designed for portable communication applications and will function down to 2.7V. The RF section is similar to the famous SA615. The audio and RSSI outputs have amplifiers with access to the feedback path. This enables the designer to adjust the output levels or add filtering.

Features

  • Low power consumption: 3.5mA typical at 3V
  • Mixer input to >150MHz
  • Mixer conversion power gain of 17dB at 45MHz
  • XTAL oscillator effective to 150MHz (L.C. oscillator or external oscillator can be used at higher frequencies)
  • 102dB of IF Amp/Limiter gain
  • 2MHz IF amp/limiter small signal bandwidth
  • Temperature compensated logarithmic Received Signal Strength Indicator (RSSI) with a 80dB dynamic range
  • Low external component count; suitable for crystal/ceramic/LC filters
  • Excellent sensitivity: 0.31µV into 50W matching network for 12dB SINAD (Signal to Noise and Distortion ratio) for 1kHz tone with RF at 45MHz and IF at 455kHz
  • SA616 meets cellular radio specifications
  • Audio output internal op amp
  • RSSI output internal op amp
  • Internal op amps with rail-to-rail outputs
  • ESD protection:
    Human Body Model 2kV
    Robot Model 200V

Products/packages

Type numberNorth American Type numberOrdering code (12NC)Product statusPackagePackingMarkingChemical contentLeadfree conversion date
SA616DK/01SA616DK/019352 752 89112Volume productionSOT266-1
(SSOP20)
TubeStandard MarkingSA616DK/01
week 12, 2005
SA616DK/01SA616DK/01-T9352 752 89118Volume productionSOT266-1
(SSOP20)
Reel Pack, SMD, 13"Standard MarkingSA616DK/01
week 12, 2005

Pricing/ordering/availability

Type numberOrdering code(12NC)Indicative price/unit($)RegionDistributorIn stockInventory dateBuy onlineSamples
SA616DK/019352 752  89112  2.5900NAAVNET ELECTRONICS MARKETING4,21010/11/2008 Buy online not available
SA616DK/019352 752  89118  2.5900NADIGI-KEY CORPORATION5,00010/11/2008 Buy online Order samples
   NADIGI-KEY CORPORATION2,46510/11/2008 Buy online  
   NAMOUSER ELECTRONICS2,28210/10/2008 Buy online  

Applications

  • Portable cellular radio FM IF
  • Cordless phones
  • Wireless systems
  • RF level meter
  • Spectrum analyzer
  • Instrumentation
  • FSK and ASK data receivers
  • Log amps
  • Portable high performance communication receiver
  • Single conversion VHF receivers

Technical documents

Support Documents

Disclaimer

The information published on product information pages of the www.nxp.com or www.semiconductors.com websites is an extract from product data sheets and is for information purposes only. For detailed information please check the most recent version of the relevant product data sheet as published on these websites. In the event of any conflict between product information pages and data sheets or deviations from information provided in the product data sheets on these product information pages, the information provided in the product data sheets shall prevail.


The product status of the product(s) described in the product data sheet may have changed since publication of the data sheet and therefore information in datasheets on product status may be outdated. The latest information on product status is published on the product information pages of the above-mentioned websites.


As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors, which will be used in future data sheets together with new contact details. In data sheets where the previous Philips references remain, please use the new links as shown below.


http://www.philips.semiconductors.com use http://www.nxp.com
http://www.semiconductors.philips.com use http://www.nxp.com (Internet)
sales.addresses@www.semiconductors.philips.com use salesaddresses@nxp.com (e-mail)

The copyright notice at the bottom of each page (or elsewhere in the document, depending on the version)
- © Koninklijke Philips Electronics N.V. (year). All rights reserved -
is replaced with:
- © NXP B.V. (year). All rights reserved.-


If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or phone (details via salesaddresses@nxp.com). Thank you for your cooperation and understanding.