NXP Semiconductors


Select site:

English

Datasheet

TDA9881
(Product Specification)
16-Nov-04, 42 pages, 217 kB

Download all documentation

Alignment-free vision and FM sound IF-PLL demodulator for negative modulated TV standards

General description
Features
Products/packages
Chemical content
Pricing/ordering/availability
Samples
Applications
Block diagrams/pinning
Technical documents
Parametrics/similar products
Print/email

General description

The TDA9881 is an alignment-free multistandard (PAL and NTSC) vision and sound IF signal PLL demodulator for negative modulation, including Quasi Split Sound (QSS) or intercarrier FM processing.

Features

  • 5 V supply voltage
  • Gain controlled wideband Vision Intermediate Frequency (VIF) amplifier; AC-coupled
  • Multistandard true synchronous demodulation for negative modulated standards with active carrier regeneration: very linear demodulation, good intermodulation figures, reduced harmonics and excellent pulse response
  • Fully integrated VIF Voltage Controlled Oscillator (VCO), alignment-free, frequencies switchable via logic pin VIF0 and pin QSSO with resistor
  • Digital acquisition help circuit, VIF frequencies of 38.0 MHz, 38.9 MHz, 45.75 MHz and 58.75 MHz
  • 4 MHz reference frequency input signal from Phase-Locked Loop (PLL) tuning system or operating as crystal oscillator
  • VIF Automatic Gain Control (AGC) detector for gain control; operating as peak sync detector
  • VIF AGC monitor output at pin VAGC
  • Precise fully digital Automatic Frequency Control (AFC) detector with 4-bit digital-to-analog converter
  • TakeOver Point (TOP) adjustable with potentiometer
  • Fully integrated sound carrier trap for 4.5 MHz, 5.5 MHz, 6.0 MHz and 6.5 MHz; controlled by FM PLL oscillator
  • Sound IF (SIF) input for single reference Quasi Split Sound (QSS) mode; PLL controlled
  • SIF AGC for gain controlled SIF amplifier; single reference QSS mixer able to operate in high performance single reference QSS mode or in intercarrier mode; switchable via SIF input pins
  • Alignment-free selective FM PLL demodulator with high linearity and low noise.

Products/packages

Type numberNorth American Type numberOrdering code (12NC)Product statusPackagePackingMarkingChemical contentLeadfree conversion date
TDA9881HN/V2TDA9881HN/V2-T9352 757 03118Volume productionSOT617-3
(HVQFN32)
Reel Pack, SMD, 13"Standard MarkingNot available
Always Pb-free
TDA9881TS/V29352 756 99118Volume productionSOT340-1
(SSOP24)
Reel Pack, SMD, 13"Standard MarkingNot available
week 42, 2004
TDA9881TS/V2TDA9881TS/V2-T9352 756 99518Volume productionSOT340-1
(SSOP24)
Reel Dry Pack, SMD, 13"Standard MarkingNot available
week 47, 2004

Pricing/ordering/availability

Type numberOrdering code(12NC)Indicative price/unit($)RegionDistributorIn stockInventory dateBuy onlineSamples
TDA9881HN/V29352 757  03118       not available
TDA9881TS/V29352 756  99118       not available
TDA9881TS/V29352 756  99518       not available

Applications

  • TV, VTR, PC and Set-Top Box (STB) applications.

Technical documents

Support Documents

Disclaimer

The information published on product information pages of the www.nxp.com or www.semiconductors.com websites is an extract from product data sheets and is for information purposes only. For detailed information please check the most recent version of the relevant product data sheet as published on these websites. In the event of any conflict between product information pages and data sheets or deviations from information provided in the product data sheets on these product information pages, the information provided in the product data sheets shall prevail.


The product status of the product(s) described in the product data sheet may have changed since publication of the data sheet and therefore information in datasheets on product status may be outdated. The latest information on product status is published on the product information pages of the above-mentioned websites.


As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors, which will be used in future data sheets together with new contact details. In data sheets where the previous Philips references remain, please use the new links as shown below.


http://www.philips.semiconductors.com use http://www.nxp.com
http://www.semiconductors.philips.com use http://www.nxp.com (Internet)
sales.addresses@www.semiconductors.philips.com use salesaddresses@nxp.com (e-mail)

The copyright notice at the bottom of each page (or elsewhere in the document, depending on the version)
- © Koninklijke Philips Electronics N.V. (year). All rights reserved -
is replaced with:
- © NXP B.V. (year). All rights reserved.-


If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or phone (details via salesaddresses@nxp.com). Thank you for your cooperation and understanding.