UDA1361TS

General description

The UDA1361TS is a single chip stereo Analog-to-Digital Converter (ADC) employing bitstream conversion techniques. The low power consumption and low voltage requirements make the device eminently suitable for use in low-voltage low-power portable digital audio equipment which incorporates recording functions.

The UDA1361TS supports the I²S-bus data format and the MSB-justified data format with word lengths of up to 24 bits.

Features

General

• Low power consumption
• 256, 384, 512 and 768f^s system clock
• 2.4 to 3.6 V power supply
• Supports sampling frequency of 5 to 110 kHz
• Small package size (SSOP16)
• Integrated high-pass filter to cancel DC offset
• Power-down mode
• Supports 2 V (RMS) input signals
• Easy application
• Master or slave operation.

Multiple format output interface

• I2S-bus and MSB-justified format compatible
• Up to 24 significant bits serial output.

Advanced audio configuration

• Stereo single-ended input configuration
• High linearity, dynamic range and low distortion.

Products/packages

Pricing/ordering/availability

Applications

• Digital audio systems.

Block diagrams/pinning

Design support

Support Documents

75014374_ap; Audio Processing ()

75011122; P9xC557Ex 8-bit 80C51 with up to 64 Kbytes of internal program memory, 5 I/O ports and 10-bit ADC (2003-03-07)

UM10104_1; PNX8526 User Manual (2003-10-08)

75015405; Philips Nexperia Network Media Player ()

Print / Email

• Print this information
• Email this information

Disclaimer

The information published on product information pages of the www.nxp.com or www.semiconductors.com websites is an extract from product data sheets and is for information purposes only. For detailed information please check the most recent version of the relevant product data sheet as published on these websites. In the event of any conflict between product information pages and data sheets or deviations from information provided in the product data sheets on these product information pages, the information provided in the product data sheets shall prevail.

The product status of the product(s) described in the product data sheet may have changed since publication of the data sheet and therefore information in datasheets on product status may be outdated. The latest information on product status is published on the product information pages of the above-mentioned websites.

As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors, which will be used in future data sheets together with new contact details. In data sheets where the previous Philips references remain, please use the new links as shown below.

http://www.philips.semiconductors.com use http://www.nxp.com

http://www.semiconductors.philips.com use http://www.nxp.com (Internet)

sales.addresses@www.semiconductors.philips.com use salesaddresses@nxp.com (e-mail)

The copyright notice at the bottom of each page (or elsewhere in the document, depending on the version)
- © Koninklijke Philips Electronics N.V. (year). All rights reserved -
is replaced with:
- © NXP B.V. (year). All rights reserved.-

If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or phone (details via salesaddresses@nxp.com). Thank you for your cooperation and understanding.