TEF7000HN

Digital low-IF car radio front-end


Quick ordering

DistributorIn Stock
OR:  

Our digital low-IF front-end tuner solutions - such as the TEF7000 - offer many benefits including best-in-class radio reception, embedded IF signal processing, higher integration and lower system costs.

The TEF7000 takes our low-IF global receiver approach to the next level. Fully HD Radio and DRM compatible, this latest digital low-IF front-end incorporates all critical RF functionality. This integration allows direct mounting on the main board and reduces external component count to a minimum. The family also complements NXP’s digital-IF DSP back-end SAF7741, ensuring optimal partitioning of functions and signal interfacing

Features and benefits

  • Global receiver together with HD Radio and DRM compatibility
  • Only one tuner alignment for IF filter center frequency
  • No hardware alignments
  • No pre-aligned components in application
  • Simplified and cost-effective implementation, eliminates the need for many external components including:
    • VCO coil and varicap diode
    • FM antenna varicap diode
    • FM and AM PIN diodes
    • AM JFET LNA
    • IF transformer coil and ceramic filter(s)
  • Low power (400 mW with 80 mA current) using a single 5 V supply voltage
  • Small 48-pin package (HVQFN)
All information on this product information page is subject to the subsequent disclaimers:

Products / Packages

Type numberOrderable part numberOrdering code (12NC)Product statusPackagePackingMarking
TEF7000HN/V2S/S422-9352 881 79518Volume productionSOT619-1
(HVQFN48)
Reel Dry Pack, SMD, 13"Standard Marking
TEF7000HN/V4TEF7000HN/V4,5189352 977 86518DevelopmentSOT619-1
(HVQFN48)
Reel Dry Pack, SMD, 13"Standard Marking
TEF7000HN/V4TEF7000HN/V4,5579352 977 86557DevelopmentSOT619-1
(HVQFN48)
Tray Dry Pack, Bakeable, MultipleStandard Marking
TEF7000HN/V2STEF7000HN/V2S,5189352 881 77518Volume productionSOT619-1
(HVQFN48)
Reel Dry Pack, SMD, 13"Standard Marking
TEF7000HN/V2STEF7000HN/V2S,5579352 881 77557Volume productionSOT619-1
(HVQFN48)
Tray Dry Pack, Bakeable, MultipleStandard Marking
TEF7000HN/V3TEF7000HN/V3,5189352 896 81518Volume productionSOT619-1
(HVQFN48)
Reel Dry Pack, SMD, 13"Standard Marking
TEF7000HN/V3TEF7000HN/V3,5579352 896 81557Volume productionSOT619-1
(HVQFN48)
Tray Dry Pack, Bakeable, MultipleStandard Marking

The variants in the table below are discontinued. See the table Discontinuation information at the bottom of this page for more information.

Type numberOrderable part numberOrdering code (12NC)Product statusPackagePackingMarking
TEF7000HN/V2TEF7000HN/V2,5189352 880 09518Withdrawn
Replacement product
SOT619-1
(HVQFN48)
Reel Dry Pack, SMD, 13"Standard Marking

Discontinuation information

Type numberOrdering code (12NC)Last-time buy dateLast-time delivery dateReplacement productDN NoticeStatusComments
TEF7000HN/V293528800951831-mrt-0931-dec-09TEF7000HN/V2SDN 62
  • Sole source product
  • Limited availability (check with your usual sales contact)
FAB ICF Closure. Refer to CIN200810003I dated October 3, 2008. Contact marketing for replacement part.

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHSLeadfree conversion dateRHFIFR (FIT)MTBF (hours)MSLMSL LF
TEF7000HN/V2S/S422-TEF7000HN/V2S/S422Always Pb-free33
TEF7000HN/V4TEF7000HN/V4,518TEF7000HN/V4Always Pb-free33
TEF7000HN/V4TEF7000HN/V4,557TEF7000HN/V4Always Pb-free33
TEF7000HN/V2STEF7000HN/V2S,518TEF7000HN/V2SAlways Pb-free33
TEF7000HN/V2STEF7000HN/V2S,557TEF7000HN/V2SAlways Pb-free33
TEF7000HN/V3TEF7000HN/V3,518TEF7000HN/V3Always Pb-free33
TEF7000HN/V3TEF7000HN/V3,557TEF7000HN/V3Always Pb-free33

The variants in the table below are discontinued. See the table Discontinuation information at the bottom of this page for more information.

Type numberOrderable part numberChemical contentRoHSLeadfree conversion dateRHFIFR (FIT)MTBF (hours)MSLMSL LF
TEF7000HN/V2TEF7000HN/V2,518Not availableAlways Pb-free33
Quality and reliability disclaimer

Quality and reliability disclaimer

Important Legal Notice on the product/generic quality information, No Warranty

NXP Semiconductors is providing this data for your convenience only. Please note however that NO WARRANTY, REPRESENTATION, GUARANTEE OR LEGALLY BINDING PRODUCT DESCRIPTION is provided by publishing this informational data, nor does NXP Semiconductors acknowledge or accept any liability related thereto. The documentation and data on NXP Semiconductors products can be found in the data sheets as officially published by NXP Semiconductors. For all purchase of products from NXP Semiconductors the NXP Semiconductors' General Terms and Conditions of Commercial Sale will apply.

NXP SEMICONDUCTORS PROVIDES THE DATA HEREUNDER “AS IS” WITHOUT WARRANTY WHATSOEVER. NXP SEMICONDUCTORS DOES NOT WARRANT OR REPRESENT THAT ANY DATA PROVIDED ON THIS WEBSITE IS CORRECT OR FIT FOR A PARTICULAR PURPOSE WHATSOEVER. IT IS PROVIDED WITHOUT ANY WARRANTY WHATSOEVER, WHETHER EXPRESS, IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS NONINFRINGEMENT OF INTELLECTUAL PROPERTY OR OTHERWISE AND MAY BE CHANGED, MODIFIED OR DELETED BY NXP SEMICONDUCTORS AT ANY TIME.

Any use of the data provided hereunder is at your own risk.

IN NO EVENT SHALL NXP SEMICONDUCTORS, BE LIABLE FOR ANY DIRECT, SPECIAL, INDIRECT, CONSEQUENTIAL, PUNITIVE, OR INCIDENTAL DAMAGES (INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS, BUSINESS INTERRUPTION, LOSS OF USE, LOSS OF DATA OR INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OF THE DATA, WHETHER OR NOT BASED ON TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT, BREACH OF WARRANTY OR ANY OTHER THEORY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED ABOVE AND ALL GENERAL DAMAGES), THE ENTIRE LIABILITY OF NXP SEMICONDUCTORS, AND YOUR EXCLUSIVE REMEDY FOR ALL OF THE FOREGOING SHALL BE LIMITED TO ACTUAL DAMAGES INCURRED BY YOU BASED ON REASONABLE RELIANCE UP TO ONE DOLLARS (US$1.00). THE FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.

Your use of this data, and all consequences of such use, is solely your responsibility. You must perform sufficient engineering and additional qualification testing in order to properly evaluate your application and determine whether a candidate NXP Semiconductors device is suitable for use in that application.

NXP Semiconductors' products are specifically designed and manufactured to be used within the electrical, thermal, mechanical and other parameters set forth in NXP Semiconductors' data sheets. Quality and reliability data provided by NXP Semiconductors, such as MTBF, MSL and FIT, is intended to be a non-binding estimate of product performance based upon diffusion process, history only. It does not imply that any performance levels reflected in such data can be met if the product is operated outside the conditions expressly stated in the latest published data sheet for a device or in your application.

The RoHS data provided hereunder is preliminary and non binding for NXP Semiconductors. NXP Semiconductors does not accept any liability related to this data.

NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage nor for any other use that is not explicitly agreed between the parties. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk.

Any use of NXP Semiconductors' products beyond the scope defined in the current NXP Semiconductors' data sheet voids all warranty responsibility of NXP Semiconductors with respect to such devices, and also voids all responsibility of NXP Semiconductors with respect to any applications assistance, product design, software performance or services of any kind that were or may have been performed in connection with the sale of any such devices.

Further, resale of NXP Semiconductors' products or services with statements different from or beyond the parameters stated by NXP Semiconductors for that product in official NXP Semiconductors data sheets, or without the warnings or instructions provided by NXP Semiconductors, voids all express and any implied warranties for the associated NXP Semiconductors product or service, and is an unfair and deceptive business practice.

Discontinuation information

Type numberOrdering code (12NC)Last-time buy dateLast-time delivery dateReplacement productDN NoticeStatusComments
TEF7000HN/V293528800951831-mrt-0931-dec-09TEF7000HN/V2SDN 62
  • Sole source product
  • Limited availability (check with your usual sales contact)
FAB ICF Closure. Refer to CIN200810003I dated October 3, 2008. Contact marketing for replacement part.

Ordering & availability

Type numberOrdering code(12NC)Orderable part numberRegionDistributorIn stockOrder quantityInventory dateBuy onlineSamples
TEF7000HN/V2S/S4229352 881 79518-      not available
TEF7000HN/V49352 977 86518TEF7000HN/V4,518      not available
TEF7000HN/V49352 977 86557TEF7000HN/V4,557      not available
TEF7000HN/V2S9352 881 77518TEF7000HN/V2S,518JAPANCHIP ONE STOPno05/14/2012Buy onlinenot available
TEF7000HN/V2S9352 881 77557TEF7000HN/V2S,557JAPANCHIP ONE STOPno05/14/2012Buy online 
TEF7000HN/V39352 896 81518TEF7000HN/V3,518      not available
TEF7000HN/V39352 896 81557TEF7000HN/V3,557       

Sample

Sample orders normally take 2-4 days for delivery.
If you do not have a direct account with NXP our network of global and regional distributors is available and equipped to support you with NXP samples. As a NXP customer you also have the option to order samples via our sales organisation.

Technical support

Do you want to ask technical questions to an NXP expert?
Please select one of the following options:

How to search?

Restricted Document

You are accessing a password protected document.
Please choose an option below

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this restricted document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Print password request form:

Before we can grant you access to our confidential documents you are required to fill in, print and sign the password request form by which you comply with the NXP Non-disclosure agreement (NDA). Please email or fax the signed form to the email-address or fax-number specified on the form. After approval you will receive username and password via email. In case you already signed an NDA with NXP and already have username and password, you can skip this step.

Open document:

If you have received the username and password, you can open the document by clicking on the "open document" link. You will be prompted for username and password. After you fill in the username and password the download will start.

Forgot your password:

In case you forgot your password you can click on the "forgot your password" link to retrieve your password. Please complete the small form with your personal details and your request will be sent to NXP. You will receive an answer with your password shortly.

Request secure documentation

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this secure document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Datasheet confidential

Fill in your details and you will be contacted

First name*

Last name*

Company*

Country*

Telephone number*

E-mail*

* required.

Your e-mail address will only be used to send the datasheet and will not be used for any other purposes.

No datasheet available

Fill in your details to receive notification when the datasheet becomes available

First name*

Last name*

Company*

E-mail*

* required.

Your email address will only be used to send the datasheet and will not be used for any other purposes.