PR5331C3HN

Contactless Interface Controller


Quick ordering

DistributorIn Stock
OR:  

The PR5331C3HN is a highly integrated transceiver module for contactless reader/writer communication at 13.56 MHz.

A dedicated ROM code is implemented to handle different RF protocols by an integrated microcontroller. The system host controller communicates with the PR5331C3HN by using the USB or the HSU link.

The protocol between the host controller and the PR5331C3HN, on top of this physical link is the CCID protocol.

RF protocols

PR5331C3HN supports the PCD mode for FeliCa (212 kbps and 424 kbps), ISO/IEC14443 Type A and B (from 106 kbps to 848 kbps), MIFARE (106 kbps), B' cards (106 kbps), picoPass tag (106 kBps) and Innovision Jewel cards (106 kbps)

The Initiator passive mode (from 106 kbps to 424 kbps) can be supported through the PC/SC transparent mode.

Interfaces

The PR5331C3HN supports USB 2.0 full speed interface (bus powered or host powered mode).

Alternatively to the USB interface, a High Speed UART (from 9600b up to 1.2 Mb) can be used to connect the PR533 to a host.

The PR5331C3HN has also a master I²C-bus interface that allows to connect one of the following peripherals:

  • An external EEPROM: in this case the PR5331C3HN is configured as master and is able to communicate with external EEPROM (address A0h) which can store configuration data like PID, UID and RF parameters
  • A TDA8029 contact smart card reader

Standards compliancy

PR5331C3HN offers commands in order for applications to be compliant with “EMV Contactless Communication Protocol Specification V2.0.1”.

PR5331C3HN supports RF protocols ISO/IEC 14443A and B such as compliancy with Smart eID standard can be achieved at application level.

Support of USB 2.0 full speed, interoperable with USB 3.0 hubs.

The PR533C3HN in PCD mode is compliant with EMV contactlesss specification V2.0.1.

Supported operating systems

  • Microsoft Windows 2000
  • Microsoft Windows XP (32 and 64 bits)
  • Microsoft Windows 2003 Server (32 and 64 bits)
  • Microsoft Windows 2008 Server (32 and 64 bits)
  • Microsoft Windows Vista (32 and 64 bits)
  • Microsoft Windows 7 (32 and 64 bits)

The PR533 is supported by the following OS through the PCSC-Lite driver:

  • GNU/Linux using libusb 1.0.x and later
  • Mac OS Leopard (1.5.6 and newer)
  • Mac OS Snow Leopard (1.6.X)
  • Solaris
  • FreeBSD

Features and benefits

  • USB 2.0 full speed host interface and CCID protocol support
  • Integrated microcontroller implements high-level RF protocols
  • Buffered output drivers to connect an antenna with minimum number of external components
  • Integrated RF level detector
  • Integrated data mode detector
  • Supports ISO/IEC 14443A Reader/Writer mode up to 848 kbit/s
  • Supports ISO/IEC 14443B Reader/Writer mode up to 848 kbit/s
  • Supports contactless communication according to the FeliCa protocol at 212 kbit/s and 424 kbit/s
  • Supports MIFARE encryption
  • Typical operating distance in Read/Write mode for communication to ISO/IEC 14443A/MIFARE, ISO/IEC 14443B or FeliCa cards up to 50 mm depending on antenna size and tuning
  • I²C-bus master interface allows to connect an external I²C EEPROM for configuration data storage or to control a TDA8029 contact smart card reader
  • Low power modes
    • Hard power-down mode
    • Soft power-down mode
  • Only one external oscillator required (27.12 MHz Crystal oscillator)
  • Power modes
    • USB bus power mode
    • 2.5 V to 3.6 V power supply operating range in non USB bus power mode
  • Dedicated I/O ports for external device control
All information on this product information page is subject to the subsequent disclaimers:
Go to the parametric search
Parametric search

Parametrics of this product

Type numberPackagePackage namefunctionalityRF protocolshost interfacesVDD [typ](V)
PR5331C3HNSOT618-1
(HVQFN40)		HVQFN40Contactless Controller ICISO/IEC 14443A; ISO/IEC 14443B; FeliCa compliant;USB; UART3.3

Package

Type numberOrderable part numberOrdering code (12NC)Product statusPackagePackingMarking
PR5331C3HN/C350PR5331C3HN/C350,519352 951 51518Volume productionSOT618-1
(HVQFN40) 		Reel Dry Pack, SMD, 13"Standard Marking
PR5331C3HN/C350PR5331C3HN/C350:559352 951 51557Volume productionSOT618-1
(HVQFN40) 		Tray Dry Pack, Bakeable, MultipleStandard Marking
PR5331C3HN/C350PR5331C3HN/C350,559352 951 51551Volume productionSOT618-1
(HVQFN40) 		Tray Dry Pack, Bakeable, SingleStandard Marking
PR5331C3HN/C360PR5331C3HN/C360,519352 976 57518Volume productionSOT618-1
(HVQFN40) 		Reel Dry Pack, SMD, 13"Standard Marking
PR5331C3HN/C360PR5331C3HN/C360:559352 976 57551Volume productionSOT618-1
(HVQFN40) 		Tray Dry Pack, Bakeable, SingleStandard Marking
PR5331C3HN/C360PR5331C3HN/C360,559352 976 57557Volume productionSOT618-1
(HVQFN40) 		Tray Dry Pack, Bakeable, MultipleStandard Marking

Outline drawing

Package VersionPackage NamePackage DescriptionReference CodesIssue Date
SOT618-1HVQFN40plastic thermal enhanced very thin quad flat package; no leads; 40 terminals; body 6 x 6 x 0.85 mmMO-220 (JEDEC); 2002-10-22

Related documents

Reflow soldering

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHSLeadfree conversion dateRHFIFR (FIT)MTBF (hours)MSLMSL LF
PR5331C3HN/C350PR5331C3HN/C350,51PR5331C3HN/C350Always Pb-free12
PR5331C3HN/C350PR5331C3HN/C350:55PR5331C3HN/C350Always Pb-free12
PR5331C3HN/C350PR5331C3HN/C350,55PR5331C3HN/C350Always Pb-free12
PR5331C3HN/C360PR5331C3HN/C360,51PR5331C3HN/C360Always Pb-free22
PR5331C3HN/C360PR5331C3HN/C360:55PR5331C3HN/C360Always Pb-free22
PR5331C3HN/C360PR5331C3HN/C360,55PR5331C3HN/C360Always Pb-free22
Quality and reliability disclaimer

Quality and reliability disclaimer

Important Legal Notice on the product/generic quality information, No Warranty

NXP Semiconductors is providing this data for your convenience only. Please note however that NO WARRANTY, REPRESENTATION, GUARANTEE OR LEGALLY BINDING PRODUCT DESCRIPTION is provided by publishing this informational data, nor does NXP Semiconductors acknowledge or accept any liability related thereto. The documentation and data on NXP Semiconductors products can be found in the data sheets as officially published by NXP Semiconductors. For all purchase of products from NXP Semiconductors the NXP Semiconductors' General Terms and Conditions of Commercial Sale will apply.

NXP SEMICONDUCTORS PROVIDES THE DATA HEREUNDER “AS IS” WITHOUT WARRANTY WHATSOEVER. NXP SEMICONDUCTORS DOES NOT WARRANT OR REPRESENT THAT ANY DATA PROVIDED ON THIS WEBSITE IS CORRECT OR FIT FOR A PARTICULAR PURPOSE WHATSOEVER. IT IS PROVIDED WITHOUT ANY WARRANTY WHATSOEVER, WHETHER EXPRESS, IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS NONINFRINGEMENT OF INTELLECTUAL PROPERTY OR OTHERWISE AND MAY BE CHANGED, MODIFIED OR DELETED BY NXP SEMICONDUCTORS AT ANY TIME.

Any use of the data provided hereunder is at your own risk.

IN NO EVENT SHALL NXP SEMICONDUCTORS, BE LIABLE FOR ANY DIRECT, SPECIAL, INDIRECT, CONSEQUENTIAL, PUNITIVE, OR INCIDENTAL DAMAGES (INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS, BUSINESS INTERRUPTION, LOSS OF USE, LOSS OF DATA OR INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OF THE DATA, WHETHER OR NOT BASED ON TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT, BREACH OF WARRANTY OR ANY OTHER THEORY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED ABOVE AND ALL GENERAL DAMAGES), THE ENTIRE LIABILITY OF NXP SEMICONDUCTORS, AND YOUR EXCLUSIVE REMEDY FOR ALL OF THE FOREGOING SHALL BE LIMITED TO ACTUAL DAMAGES INCURRED BY YOU BASED ON REASONABLE RELIANCE UP TO ONE DOLLARS (US$1.00). THE FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.

Your use of this data, and all consequences of such use, is solely your responsibility. You must perform sufficient engineering and additional qualification testing in order to properly evaluate your application and determine whether a candidate NXP Semiconductors device is suitable for use in that application.

NXP Semiconductors' products are specifically designed and manufactured to be used within the electrical, thermal, mechanical and other parameters set forth in NXP Semiconductors' data sheets. Quality and reliability data provided by NXP Semiconductors, such as MTBF, MSL and FIT, is intended to be a non-binding estimate of product performance based upon diffusion process, history only. It does not imply that any performance levels reflected in such data can be met if the product is operated outside the conditions expressly stated in the latest published data sheet for a device or in your application.

The RoHS data provided hereunder is preliminary and non binding for NXP Semiconductors. NXP Semiconductors does not accept any liability related to this data.

NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage nor for any other use that is not explicitly agreed between the parties. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk.

Any use of NXP Semiconductors' products beyond the scope defined in the current NXP Semiconductors' data sheet voids all warranty responsibility of NXP Semiconductors with respect to such devices, and also voids all responsibility of NXP Semiconductors with respect to any applications assistance, product design, software performance or services of any kind that were or may have been performed in connection with the sale of any such devices.

Further, resale of NXP Semiconductors' products or services with statements different from or beyond the parameters stated by NXP Semiconductors for that product in official NXP Semiconductors data sheets, or without the warnings or instructions provided by NXP Semiconductors, voids all express and any implied warranties for the associated NXP Semiconductors product or service, and is an unfair and deceptive business practice.

Documentation for this product

File nameTitleTypeFormatDate
PR533Contactless Interface ControllerData sheetpdf2012-10-29
PR533_SDSContactless Interface ControllerShort data sheetpdf2012-10-29
AN11193PR533 Evaluation Board description - PCB2235Application notepdf2012-08-09
AN11064PR533 USB stick - Evaluation boardApplication notepdf2012-08-09
AN11057PR533 Product Support Package DescriptionApplication notepdf2012-12-04
AN11056PR533 HW integration guideApplication notepdf2012-06-20
PR533_939775017324NXP contactless reader IC PR533Leafletpdf2012-10-23
PR533_PSP_12PR533 Product Support PackageOther typezip2012-12-11
UM10464PR533 - PCSC ToolUser manualpdf2012-10-18
UM10467PR533 Background applicationUser manualpdf2012-10-18
UM10463PR533 Contactless Interface ControllerUser manualpdf2012-07-05

Ordering & availability

Type numberOrdering code (12NC)Orderable part numberRegionDistributorIn stockOrder quantityInventory dateBuy onlineSamples
PR5331C3HN/C3509352 951 51518PR5331C3HN/C350,51      not available
PR5331C3HN/C3509352 951 51557PR5331C3HN/C350:55      not available
PR5331C3HN/C3509352 951 51551PR5331C3HN/C350,55ASIAAVNET EXPRESS ASIA2905/21/2013Buy online 
   NADIGI-KEY CORPORATION1515/21/2013Buy online 
   NAFUTURE ELECTRONICS55/20/2013Buy online 
   EUFUTURE ELECTRONICS UK55/20/2013Buy online 
   ASIAFUTURE ELECTRONICS- ASIA55/20/2013Buy online 
   ASIASAC - Taiwanyes49005/01/2013Buy online 
PR5331C3HN/C3609352 976 57518PR5331C3HN/C360,51      not available
PR5331C3HN/C3609352 976 57551PR5331C3HN/C360:55       
PR5331C3HN/C3609352 976 57557PR5331C3HN/C360,55      not available

Sample

Sample orders normally take 2-4 days for delivery.
If you do not have a direct account with NXP our network of global and regional distributors is available and equipped to support you with NXP samples. As a NXP customer you also have the option to order samples via our sales organisation.

Technical support

Do you want to ask technical questions to an NXP expert?
Please select one of the following options:

How to search?

Restricted Document

You are accessing a password protected document.
Please choose an option below

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this restricted document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Print password request form:

Before we can grant you access to our confidential documents you are required to fill in, print and sign the password request form by which you comply with the NXP Non-disclosure agreement (NDA). Please email or fax the signed form to the email-address or fax-number specified on the form. After approval you will receive username and password via email. In case you already signed an NDA with NXP and already have username and password, you can skip this step.

Open document:

If you have received the username and password, you can open the document by clicking on the "open document" link. You will be prompted for username and password. After you fill in the username and password the download will start.

Forgot your password:

In case you forgot your password you can click on the "forgot your password" link to retrieve your password. Please complete the small form with your personal details and your request will be sent to NXP. You will receive an answer with your password shortly.

Request secure documentation

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this secure document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Datasheet confidential

Fill in your details and you will be contacted

First name*

Last name*

Company*

Country*

Telephone number*

E-mail*

* required.

Your e-mail address will only be used to send the datasheet and will not be used for any other purposes.

No full datasheet available

Fill in your details to receive notification when the datasheet becomes available

First name*

Last name*

Company*

E-mail*

* required.

Your email address will only be used to send the datasheet and will not be used for any other purposes.