74HC7266

Quad 2-input EXCLUSIVE-NOR gate


The 74HC7266 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A.

The 74HC7266 provide the EXCLUSIVE-NOR function with active push-pull output.

Features and benefits

  • Output capability: standard
  • ICC category: SSI

Applications

  • Control counters
  • Timers
  • Frequency dividers
  • Time-delay circuits
  • CIO (Compact Integrated Oscillator)
  • Third-overtone crystal operation

Parametrics of this product

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)No of bitsPower dissipation considerationsTamb (Cel)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74HC7266DDevelopment2.0 - 6.0CMOS+/- 5.2114low-40~125823.240SO14

Package

All type numbers in the table below are discontinued. See the table Discontinuation information at the bottom of this page for more information.

Type numberPackageOutline versionReflow-/Wave solderingPackingProduct statusMarkingOrderable part number, (Ordering code (12NC))
74HC7266DSO14
(SOT108-1)
sot108-1_poSO-SOJ-REFLOW
SO-SOJ-WAVE
Reel 13" Q1/T1 CECCDiscontinued
Replacement product
74HC7266D74HC7266D,653
( 9337 722 70653 )
Bulk Pack, CECCDiscontinued
Replacement product
74HC7266D74HC7266D,652
( 9337 722 70652 )

Discontinuation information

Type numberOrdering code (12NC)Last-time buy dateLast-time delivery dateReplacement productDN NoticeStatusComments
74HC7266D93377227065330-Sep-1531-Mar-16DN NXP-DN_201503011DN
    Support is based on available inventory. Refer to MONARCH PCNs
    74HC7266D93377227065230-Sep-1531-Mar-16DN NXP-DN_201503011DN
      Support is based on available inventory. Refer to MONARCH PCNs

      Quality, reliability & chemical content

      All type numbers in the table below are discontinued. See the table Discontinuation information at the bottom of this page for more information.

      Type numberOrderable part numberChemical contentRoHS / RHFLeadfree conversion dateEFRIFR (FIT)MTBF (hour)MSLMSL LF
      74HC7266D74HC7266D,65374HC7266Dweek 5, 200484.96.621.51E811
      74HC7266D74HC7266D,65274HC7266Dweek 5, 200484.96.621.51E811
      Quality and reliability disclaimer

      Quality and reliability disclaimer

      Important Legal Notice on the product/generic quality information, No Warranty

      NXP Semiconductors is providing this data for your convenience only. Please note however that NO WARRANTY, REPRESENTATION, GUARANTEE OR LEGALLY BINDING PRODUCT DESCRIPTION is provided by publishing this informational data, nor does NXP Semiconductors acknowledge or accept any liability related thereto. The documentation and data on NXP Semiconductors products can be found in the data sheets as officially published by NXP Semiconductors. For all purchase of products from NXP Semiconductors the NXP Semiconductors' General Terms and Conditions of Commercial Sale will apply.

      NXP SEMICONDUCTORS PROVIDES THE DATA HEREUNDER “AS IS” WITHOUT WARRANTY WHATSOEVER. NXP SEMICONDUCTORS DOES NOT WARRANT OR REPRESENT THAT ANY DATA PROVIDED ON THIS WEBSITE IS CORRECT OR FIT FOR A PARTICULAR PURPOSE WHATSOEVER. IT IS PROVIDED WITHOUT ANY WARRANTY WHATSOEVER, WHETHER EXPRESS, IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS NONINFRINGEMENT OF INTELLECTUAL PROPERTY OR OTHERWISE AND MAY BE CHANGED, MODIFIED OR DELETED BY NXP SEMICONDUCTORS AT ANY TIME.

      Any use of the data provided hereunder is at your own risk.

      IN NO EVENT SHALL NXP SEMICONDUCTORS, BE LIABLE FOR ANY DIRECT, SPECIAL, INDIRECT, CONSEQUENTIAL, PUNITIVE, OR INCIDENTAL DAMAGES (INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS, BUSINESS INTERRUPTION, LOSS OF USE, LOSS OF DATA OR INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OF THE DATA, WHETHER OR NOT BASED ON TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT, BREACH OF WARRANTY OR ANY OTHER THEORY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED ABOVE AND ALL GENERAL DAMAGES), THE ENTIRE LIABILITY OF NXP SEMICONDUCTORS, AND YOUR EXCLUSIVE REMEDY FOR ALL OF THE FOREGOING SHALL BE LIMITED TO ACTUAL DAMAGES INCURRED BY YOU BASED ON REASONABLE RELIANCE UP TO ONE DOLLARS (US$1.00). THE FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.

      Your use of this data, and all consequences of such use, is solely your responsibility. You must perform sufficient engineering and additional qualification testing in order to properly evaluate your application and determine whether a candidate NXP Semiconductors device is suitable for use in that application.

      NXP Semiconductors' products are specifically designed and manufactured to be used within the electrical, thermal, mechanical and other parameters set forth in NXP Semiconductors' data sheets. Quality and reliability data provided by NXP Semiconductors, such as MTBF, MSL and FIT, is intended to be a non-binding estimate of product performance based upon diffusion process, history only. It does not imply that any performance levels reflected in such data can be met if the product is operated outside the conditions expressly stated in the latest published data sheet for a device or in your application.

      The RoHS data provided hereunder is preliminary and non binding for NXP Semiconductors. NXP Semiconductors does not accept any liability related to this data.

      NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage nor for any other use that is not explicitly agreed between the parties. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk.

      Any use of NXP Semiconductors' products beyond the scope defined in the current NXP Semiconductors' data sheet voids all warranty responsibility of NXP Semiconductors with respect to such devices, and also voids all responsibility of NXP Semiconductors with respect to any applications assistance, product design, software performance or services of any kind that were or may have been performed in connection with the sale of any such devices.

      Further, resale of NXP Semiconductors' products or services with statements different from or beyond the parameters stated by NXP Semiconductors for that product in official NXP Semiconductors data sheets, or without the warnings or instructions provided by NXP Semiconductors, voids all express and any implied warranties for the associated NXP Semiconductors product or service, and is an unfair and deceptive business practice.

      Discontinuation information

      Type numberOrdering code (12NC)Last-time buy dateLast-time delivery dateReplacement productDN NoticeStatusComments
      74HC7266D93377227065330-Sep-1531-Mar-16DN NXP-DN_201503011DN
        Support is based on available inventory. Refer to MONARCH PCNs
        74HC7266D93377227065230-Sep-1531-Mar-16DN NXP-DN_201503011DN
          Support is based on available inventory. Refer to MONARCH PCNs

          Documentation for this product

          File nameTitleTypeFormatDate
          74HC7266_CNVQuad 2-input EXCLUSIVE-NOR gateData sheetpdf1990-12-01
          AN11044Pin FMEA 74HC/74HCT familyApplication notepdf2011-03-16
          75017511Voltage translation: How to manage mixed-voltage designs with NXP level translatorsBrochurepdf2014-05-20
          HCT_USER_GUIDEHC/T User GuideUser manualpdf1997-11-01
          SO-SOJ-REFLOWFootprint for reflow solderingReflow solderingpdf2009-10-08
          SO-SOJ-WAVEFootprint for wave solderingWave solderingpdf2009-10-08
          sot108-1_poplastic small outline package; 14 leads; body width 3.9 mmOutline drawingpdf2009-10-08
          SOT108-1_118SO14; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering code (12NC) ending 118Packingpdf2013-04-08

          Technical support

          Do you want to ask technical questions to an NXP expert?
          Please select one of the following options:

          Find answers to your design questions on this page. If available you can find information in our NXP Support Community or you can find NXP models, Demo boards and Design tools.

          Frequently asked questions and Community discussions

          The Frequently asked questions are answers provided by NXP technical experts. The discussions are between users of the Community, these can be NXP technical experts, but also other users.

          Please wait. Loading data...


          No items available, please go to the Community to engage in a new discussion.

          Disclaimer All Community items are matched using search logic, so not all results may be equally relevant.
          Any opinions, advice, statements or other information in the discussions posted or transmitted by any third party are the responsibility of the author of that message and not of NXP.

          {"subtitle":"Quad 2-input EXCLUSIVE-NOR gate","category":["Logic","Gates","EXCLUSIVE-NOR gates",""],"basictype":["74HC7266D","74HC7266"]}

          How to search?

          Already registered to MyNXP? or Register

          Feedback

          Restricted Document

          You are accessing a password protected document.
          Please choose an option below

          Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this restricted document.

          First name*

          Last name*

          Company*

          E-mail*

          Comments

          Leave blank

          Fields with an * are required

          Print password request form:

          Before we can grant you access to our confidential documents you are required to fill in, print and sign the password request form by which you comply with the NXP Non-disclosure agreement (NDA). Please email or fax the signed form to the email-address or fax-number specified on the form. After approval you will receive username and password via email. In case you already signed an NDA with NXP and already have username and password, you can skip this step.

          Open document:

          If you have received the username and password, you can open the document by clicking on the "open document" link. You will be prompted for username and password. After you fill in the username and password the download will start.

          Forgot your password:

          In case you forgot your password you can click on the "forgot your password" link to retrieve your password. Please complete the small form with your personal details and your request will be sent to NXP. You will receive an answer with your password shortly.

          Request secure documentation

          Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this secure document.

          First name*

          Last name*

          Company*

          E-mail*

          Comments

          Leave blank

          Fields with an * are required

          Datasheet confidential

          Fill in your details and you will be contacted

          First name*

          Last name*

          Company*

          Country*

          Telephone number*

          E-mail*

          Leave blank

          Fields with an * are required

          Your e-mail address will only be used to send the datasheet and will not be used for any other purposes.

          No full datasheet available

          Fill in your details to receive notification when the datasheet becomes available

          First name*

          Last name*

          Company*

          E-mail*

          Leave blank

          Fields with an * are required.

          Your email address will only be used to send the datasheet and will not be used for any other purposes.