JN5148

32-bit MCU and IEEE802.15.4 transceiver


Quick ordering

DistributorIn Stock
OR:  

The JN5148 is an ultra low power, high performance MCU combined with an IEEE802.15.4 compliant transceiver. It is targeted at low-power wireless networking applications, and features an enhanced 32-bit RISC processor offering high coding efficiency through variable width instructions, a multi-stage instruction pipeline and low power operation with programmable clock speeds and various sleep modes. The device comprises 128 kB of ROM, 128 kB of RAM, and a rich mix of analogue and digital peripherals. The large memory footprint allows the device to run both the networking stack, such as ZigBee PRO or NXP"s proprietary JenNet networking stack, and an embedded application or in a co-processor mode. The operating current is below 18 mA, allowing operation direct from a coin cell.

Features and benefits

  • Best in class radio current consumption
  • Extensive user peripherals
  • Highly featured 32-bit RISC CPU for high performance and low power
  • Large memory footprint to run ZigBee PRO together with an application
  • Single chip integrates transceiver and microcontroller
  • System BOM is low in component count and cost
  • Very low current solution for long battery life

Applications

  • Home and commercial building automation
  • Industrial systems
  • Lighting Systems
  • Location Aware services – e.g. Asset Tracking
  • Remote Control
  • Robust and secure low power wireless applications
  • Smart metering (e.g. AMR)
  • Telemetry
  • Toys and gaming peripherals
  • ZigBee PRO networks
All information on this product information page is subject to the subsequent disclaimers:

Show functional diagram

OM7684 Block diagram
OM7684 Block diagram

Parametrics of this product

SymbolParameterConditionsMinTyp/NomMaxUnit
Clock generator
fclk(max)maximum clock frequency32MHz
Radio transceiver
frangefrequency range2.42.5GHz
Nchnumber of channels16
Po(RF)RF output powerTamb = 25 °C; 2 V < VDD < 3.6 V0.52.5dBm
SRXreceiver sensitivityPER = 1 %; Tamb = 25 °C; 2 V < VDD < 3.6 V-92-95dBm
Z0characteristic impedance2.4 GHz < f < 2.5 GHz [3]50Ω
Operating conditions
IDDsupply currentDeep sleep mode; Tamb = 25 °C [0]100nA
IDDsupply currentsleep mode; I/O wakeup [1]0.12µA
IDDsupply current (receive)CPU in software doze; radio in receive mode17.5mA
IDDsupply currentsleep mode; I/O wakeup; RC Oscillator timer wakeup; Tamb = 25 °C [2]1.25µA
IDDsupply current (transmit)CPU in software doze; radio transmitting15mA
Tambambient temperature-4085°C
VDDsupply voltage23.6V
Memory
Nbyte(on-chip)on-chip memoryROM128kB
Nbyte(on-chip)on-chip memoryRAM128kB
Nbyte(on-chip)on-chip memoryOTP ROM; eFuse32B
I/O pins
Nionumber of I/O terminals21
Analog interface
Nperinumber of peripheralsACOMP; Analogue Comparator2
Nperinumber of peripheralsDAC; Nbit = 12 bit2
Nperinumber of peripheralsADC; Nbit = 12 bit4
Serial interface
Nperinumber of peripheralsUART; fbit ≤ 1 Mbit/s2
Nperinumber of peripheralsSPI; fbit ≤ 16 Mbit/s1
Nperinumber of peripheralsI²C; fbit ≤ 400 kbit/s1
Timer
Nperinumber of peripheralsWakeup Timer2
Nperinumber of peripheralsTick Timer1
Nperinumber of peripheralsTIM; Counter/timer with 5 modes3
Nperinumber of peripheralsWDT; WATCHDOG Timer1

Products / Packages

Type numberOrderable part numberOrdering code (12NC)Product statusPackagePackingMarking
JN5148/Z01JN5148/Z01,5159352 974 68515DevelopmentSOT684-10
(HVQFN56) 		Reel Dry Pack, 7"Standard Marking
JN5148/Z01JN5148/Z01,5189352 974 68518DevelopmentSOT684-10
(HVQFN56) 		Reel Dry Pack, SMD, 13"Standard Marking
JN5148/001JN5148/001,5319352 939 99531Volume productionSOT684-10
(HVQFN56) 		Standard Marking
JN5148/001JN5148/001,5189352 939 99518Volume productionSOT684-10
(HVQFN56) 		Reel Dry Pack, SMD, 13"Standard Marking
JN5148/001JN5148/001,5159352 939 99515Volume productionSOT684-10
(HVQFN56) 		Reel Dry Pack, 7"Standard Marking
JN5148/J01JN5148/J01,5159352 963 82515Volume productionSOT684-10
(HVQFN56) 		Reel Dry Pack, 7"Standard Marking
JN5148/J01JN5148/J01,5189352 963 82518Volume productionSOT684-10
(HVQFN56) 		Reel Dry Pack, SMD, 13"Standard Marking

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHSLeadfree conversion dateRHFIFR (FIT)MTBF (hours)MSLMSL LF
JN5148/Z01JN5148/Z01,515JN5148/Z01Always Pb-free2a
JN5148/Z01JN5148/Z01,518JN5148/Z01Always Pb-free2a
JN5148/001JN5148/001,531JN5148/001Always Pb-free2a2a
JN5148/001JN5148/001,518JN5148/001Always Pb-free2a2a
JN5148/001JN5148/001,515JN5148/001Always Pb-free2a2a
JN5148/J01JN5148/J01,515JN5148/J01Always Pb-free2a2a
JN5148/J01JN5148/J01,518JN5148/J01Always Pb-free2a2a
Quality and reliability disclaimer

Quality and reliability disclaimer

Important Legal Notice on the product/generic quality information, No Warranty

NXP Semiconductors is providing this data for your convenience only. Please note however that NO WARRANTY, REPRESENTATION, GUARANTEE OR LEGALLY BINDING PRODUCT DESCRIPTION is provided by publishing this informational data, nor does NXP Semiconductors acknowledge or accept any liability related thereto. The documentation and data on NXP Semiconductors products can be found in the data sheets as officially published by NXP Semiconductors. For all purchase of products from NXP Semiconductors the NXP Semiconductors' General Terms and Conditions of Commercial Sale will apply.

NXP SEMICONDUCTORS PROVIDES THE DATA HEREUNDER “AS IS” WITHOUT WARRANTY WHATSOEVER. NXP SEMICONDUCTORS DOES NOT WARRANT OR REPRESENT THAT ANY DATA PROVIDED ON THIS WEBSITE IS CORRECT OR FIT FOR A PARTICULAR PURPOSE WHATSOEVER. IT IS PROVIDED WITHOUT ANY WARRANTY WHATSOEVER, WHETHER EXPRESS, IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS NONINFRINGEMENT OF INTELLECTUAL PROPERTY OR OTHERWISE AND MAY BE CHANGED, MODIFIED OR DELETED BY NXP SEMICONDUCTORS AT ANY TIME.

Any use of the data provided hereunder is at your own risk.

IN NO EVENT SHALL NXP SEMICONDUCTORS, BE LIABLE FOR ANY DIRECT, SPECIAL, INDIRECT, CONSEQUENTIAL, PUNITIVE, OR INCIDENTAL DAMAGES (INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS, BUSINESS INTERRUPTION, LOSS OF USE, LOSS OF DATA OR INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OF THE DATA, WHETHER OR NOT BASED ON TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT, BREACH OF WARRANTY OR ANY OTHER THEORY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED ABOVE AND ALL GENERAL DAMAGES), THE ENTIRE LIABILITY OF NXP SEMICONDUCTORS, AND YOUR EXCLUSIVE REMEDY FOR ALL OF THE FOREGOING SHALL BE LIMITED TO ACTUAL DAMAGES INCURRED BY YOU BASED ON REASONABLE RELIANCE UP TO ONE DOLLARS (US$1.00). THE FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.

Your use of this data, and all consequences of such use, is solely your responsibility. You must perform sufficient engineering and additional qualification testing in order to properly evaluate your application and determine whether a candidate NXP Semiconductors device is suitable for use in that application.

NXP Semiconductors' products are specifically designed and manufactured to be used within the electrical, thermal, mechanical and other parameters set forth in NXP Semiconductors' data sheets. Quality and reliability data provided by NXP Semiconductors, such as MTBF, MSL and FIT, is intended to be a non-binding estimate of product performance based upon diffusion process, history only. It does not imply that any performance levels reflected in such data can be met if the product is operated outside the conditions expressly stated in the latest published data sheet for a device or in your application.

The RoHS data provided hereunder is preliminary and non binding for NXP Semiconductors. NXP Semiconductors does not accept any liability related to this data.

NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage nor for any other use that is not explicitly agreed between the parties. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk.

Any use of NXP Semiconductors' products beyond the scope defined in the current NXP Semiconductors' data sheet voids all warranty responsibility of NXP Semiconductors with respect to such devices, and also voids all responsibility of NXP Semiconductors with respect to any applications assistance, product design, software performance or services of any kind that were or may have been performed in connection with the sale of any such devices.

Further, resale of NXP Semiconductors' products or services with statements different from or beyond the parameters stated by NXP Semiconductors for that product in official NXP Semiconductors data sheets, or without the warnings or instructions provided by NXP Semiconductors, voids all express and any implied warranties for the associated NXP Semiconductors product or service, and is an unfair and deceptive business practice.

Documentation for this product

TypeFormatTitleDate
Data sheetpdfJN5148-001 (v.1.7)2011-05-06
Application notepdfReference design for a remote controlled non-isolated 11 W LED driver using SSL21082, TEA1721 and JN5148 (v.1.0)2012-02-23
LeafletpdfJN5148 product brief (v.1.4)2010-09-13
ReportpdfSmart lighting: A bright idea whose time has come (v.1.0)2011-12-20
Selection guidepdfNXP's RF Manual 15th edition Simplified Chinese (v.1.0)2011-08-05
Selection guidepdfNXP's RF Manual 15th edition Japanese (v.1.0)2011-08-05

Ordering & availability

Type numberOrdering code(12NC)Orderable part numberRegionDistributorIn stockOrder quantityInventory dateBuy onlineSamples
JN5148/Z019352 974 68515JN5148/Z01,515      not available
JN5148/Z019352 974 68518JN5148/Z01,518      not available
JN5148/0019352 939 99531JN5148/001,531NAMOUSER ELECTRONICS3385/24/2012Buy online 
   NAMOUSER ELECTRONICS3385/24/2012Buy online 
   NAWPG AMERICAS INC.405/24/2012Buy online 
   ASIAWPI4050005/14/2012Buy online 
   NAFUTURE ELECTRONICS355/23/2012Buy online 
   EUFUTURE ELECTRONICS UK355/23/2012Buy online 
   ASIAFUTURE ELECTRONICS- ASIA355/23/2012Buy online 
JN5148/0019352 939 99518JN5148/001,518ASIAARROW ASIA PAC LTD5,0005/23/2012Buy onlinenot available
JN5148/0019352 939 99515JN5148/001,515NAWPG AMERICAS INC.5,0005/24/2012Buy onlinenot available
   NAAVNET EXPRESS3,0005/24/2012Buy online 
   NAARROW ELECTRONICS1,0005/24/2012Buy online 
JN5148/J019352 963 82515JN5148/J01,515      not available
JN5148/J019352 963 82518JN5148/J01,518      not available

Sample

Sample orders normally take 2-4 days for delivery.
If you do not have a direct account with NXP our network of global and regional distributors is available and equipped to support you with NXP samples. As a NXP customer you also have the option to order samples via our sales organisation.

Technical support

Do you want to ask technical questions to an NXP expert?
Please select one of the following options:

How to search?

Restricted Document

You are accessing a password protected document.
Please choose an option below

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this restricted document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Print password request form:

Before we can grant you access to our confidential documents you are required to fill in, print and sign the password request form by which you comply with the NXP Non-disclosure agreement (NDA). Please email or fax the signed form to the email-address or fax-number specified on the form. After approval you will receive username and password via email. In case you already signed an NDA with NXP and already have username and password, you can skip this step.

Open document:

If you have received the username and password, you can open the document by clicking on the "open document" link. You will be prompted for username and password. After you fill in the username and password the download will start.

Forgot your password:

In case you forgot your password you can click on the "forgot your password" link to retrieve your password. Please complete the small form with your personal details and your request will be sent to NXP. You will receive an answer with your password shortly.

Request secure documentation

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this secure document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Datasheet confidential

Fill in your details and you will be contacted

First name*

Last name*

Company*

Country*

Telephone number*

E-mail*

* required.

Your e-mail address will only be used to send the datasheet and will not be used for any other purposes.

No datasheet available

Fill in your details to receive notification when the datasheet becomes available

First name*

Last name*

Company*

E-mail*

* required.

Your email address will only be used to send the datasheet and will not be used for any other purposes.