BGU7033

1 GHz wideband low-noise amplifier with bypass


Quick ordering

DistributorIn Stock
OR:  

The BGU7033 MMIC is a wideband amplifier with selectable gain and bypass mode. It is designed specifically for high linearity, low-noise applications over a frequency range of 40 MHz to 1 GHz. It is especially suited to Set-Top Box applications. The LNA is housed in a 6-pin SOT363 plastic SMD package.

Features and benefits

  • 75 Ω input and output impedance
  • Bypass mode current consumption < 5 mA
  • ESD protection > 2 kV Human Body Model (HBM) on all pins
  • Flat gain between 40 MHz and 1 GHz
  • High linearity with an IP3O of 29 dBm
  • Internally biased
  • Noise figure of 4.5 dB
  • Power-down during bypass mode
  • Programmable gain and bypass modes: Gp = 10 dB, Gp = 5 dB and bypass

Applications

  • Home networking and in-house signal distribution
  • Personal and Digital Video Recorders (PVR and DVR)
  • Silicon and “Can” tuners
  • Terrestrial and cable Set-Top Boxes (STB)
All information on this product information page is subject to the subsequent disclaimers:
Go to the parametric search
Parametric search

Parametrics of this product

SymbolParameterConditionsMinTyp/NomMaxUnit
ICC(tot)total supply currentVCC = 5 V; Gp = 10 dB mode [0] [1]43mA
|s21|2insertion power gain40 Hz ≤ f ≤ 1000 Hz; VCC = 5 V; Gp = 10 dB mode [1]10dB
|s21|2insertion power gain40 Hz ≤ f ≤ 1000 Hz; VCC = 5 V; Gp = 5 dB mode [1]5dB
|s21|2insertion power gain40 Hz ≤ f ≤ 1000 Hz; VCC = 5 V; bypass mode [1]-2dB
NFnoise figure40 MHz ≤ f ≤ 1000 MHz; Gp = 10 dB mode [1]4.5dB
NFnoise figure40 MHz ≤ f ≤ 1000 MHz; Gp = 5 dB mode [1]6dB
NFnoise figure40 MHz ≤ f ≤ 1000 MHz; bypass mode [1]2.5dB
PL(1dB)output power at 1 dB gain compressionf = 1000 MHz; ICC = 43 mA; VCC = 5 V; Gp = 10 dB mode [1]14dBm
PL(1dB)output power at 1 dB gain compressionGp = 5 dB mode; f = 1000 MHz; ICC = 43 mA; VCC = 5 V [1]9dBm
IP3Ooutput third-order intercept pointGp = 10 dB mode [1] [2]29dBm
IP3Ooutput third-order intercept pointGp = 5 dB mode [1] [2]29dBm
IP3Ooutput third-order intercept pointbypass mode [1] [2]29dBm
frangefrequency range401000MHz

Products / Packages

Type numberOrderable part numberOrdering code (12NC)Product statusPackagePackingMarking
BGU7033BGU7033,1159340 646 61115Volume productionSOT363
(TSSOP6) 		Tape reel smdSE%

Pinning information

PinSymbolDescriptionSimplified outlineGraphic symbol
1RF_OUTRF OutputSOT363 (SC-88)symbol
2VCCSupply Voltage
3n.c.not connected
4n.c.not connected
5GNDGround
6RF_INRF Input

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHSLeadfree conversion dateRHFIFR (FIT)MTBF (hours)MSLMSL LF
BGU7033BGU7033,115BGU7033Always Pb-free11
Quality and reliability disclaimer

Quality and reliability disclaimer

Important Legal Notice on the product/generic quality information, No Warranty

NXP Semiconductors is providing this data for your convenience only. Please note however that NO WARRANTY, REPRESENTATION, GUARANTEE OR LEGALLY BINDING PRODUCT DESCRIPTION is provided by publishing this informational data, nor does NXP Semiconductors acknowledge or accept any liability related thereto. The documentation and data on NXP Semiconductors products can be found in the data sheets as officially published by NXP Semiconductors. For all purchase of products from NXP Semiconductors the NXP Semiconductors' General Terms and Conditions of Commercial Sale will apply.

NXP SEMICONDUCTORS PROVIDES THE DATA HEREUNDER “AS IS” WITHOUT WARRANTY WHATSOEVER. NXP SEMICONDUCTORS DOES NOT WARRANT OR REPRESENT THAT ANY DATA PROVIDED ON THIS WEBSITE IS CORRECT OR FIT FOR A PARTICULAR PURPOSE WHATSOEVER. IT IS PROVIDED WITHOUT ANY WARRANTY WHATSOEVER, WHETHER EXPRESS, IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS NONINFRINGEMENT OF INTELLECTUAL PROPERTY OR OTHERWISE AND MAY BE CHANGED, MODIFIED OR DELETED BY NXP SEMICONDUCTORS AT ANY TIME.

Any use of the data provided hereunder is at your own risk.

IN NO EVENT SHALL NXP SEMICONDUCTORS, BE LIABLE FOR ANY DIRECT, SPECIAL, INDIRECT, CONSEQUENTIAL, PUNITIVE, OR INCIDENTAL DAMAGES (INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS, BUSINESS INTERRUPTION, LOSS OF USE, LOSS OF DATA OR INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OF THE DATA, WHETHER OR NOT BASED ON TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT, BREACH OF WARRANTY OR ANY OTHER THEORY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED ABOVE AND ALL GENERAL DAMAGES), THE ENTIRE LIABILITY OF NXP SEMICONDUCTORS, AND YOUR EXCLUSIVE REMEDY FOR ALL OF THE FOREGOING SHALL BE LIMITED TO ACTUAL DAMAGES INCURRED BY YOU BASED ON REASONABLE RELIANCE UP TO ONE DOLLARS (US$1.00). THE FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.

Your use of this data, and all consequences of such use, is solely your responsibility. You must perform sufficient engineering and additional qualification testing in order to properly evaluate your application and determine whether a candidate NXP Semiconductors device is suitable for use in that application.

NXP Semiconductors' products are specifically designed and manufactured to be used within the electrical, thermal, mechanical and other parameters set forth in NXP Semiconductors' data sheets. Quality and reliability data provided by NXP Semiconductors, such as MTBF, MSL and FIT, is intended to be a non-binding estimate of product performance based upon diffusion process, history only. It does not imply that any performance levels reflected in such data can be met if the product is operated outside the conditions expressly stated in the latest published data sheet for a device or in your application.

The RoHS data provided hereunder is preliminary and non binding for NXP Semiconductors. NXP Semiconductors does not accept any liability related to this data.

NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage nor for any other use that is not explicitly agreed between the parties. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk.

Any use of NXP Semiconductors' products beyond the scope defined in the current NXP Semiconductors' data sheet voids all warranty responsibility of NXP Semiconductors with respect to such devices, and also voids all responsibility of NXP Semiconductors with respect to any applications assistance, product design, software performance or services of any kind that were or may have been performed in connection with the sale of any such devices.

Further, resale of NXP Semiconductors' products or services with statements different from or beyond the parameters stated by NXP Semiconductors for that product in official NXP Semiconductors data sheets, or without the warnings or instructions provided by NXP Semiconductors, voids all express and any implied warranties for the associated NXP Semiconductors product or service, and is an unfair and deceptive business practice.

Documentation for this product

TypeFormatTitleDate
Data sheetpdf1 GHz wideband low-noise amplifier with bypass (v.2.0)2010-09-13
LeafletpdfLNAs with programmable gain & bypass option for improved tuner performance (v.1.0)2012-04-17
Line cardpdfApplication guide: Flat-panel TV sets (v.2.0)2012-03-13
Other typepdfApplication guide: Set-top boxes (STBs) (v.1.0)2011-11-28

Ordering & availability

Type numberOrdering code(12NC)Orderable part numberRegionDistributorIn stockOrder quantityInventory dateBuy onlineSamples
BGU70339340 646 61115BGU7033,115NADIGI-KEY CORPORATION3,0005/24/2012Buy online 
   NAFUTURE ELECTRONICS3,0005/23/2012Buy online 
   EUFUTURE ELECTRONICS UK3,0005/23/2012Buy online 
   ASIAFUTURE ELECTRONICS- ASIA3,0005/23/2012Buy online 
   NAMOUSER ELECTRONICS4455/24/2012Buy online 
   NAMOUSER ELECTRONICS4455/24/2012Buy online 
   NAAVNET EXPRESS2005/24/2012Buy online 

Sample

Sample orders normally take 2-4 days for delivery.
If you do not have a direct account with NXP our network of global and regional distributors is available and equipped to support you with NXP samples. As a NXP customer you also have the option to order samples via our sales organisation.

Technical support

Do you want to ask technical questions to an NXP expert?
Please select one of the following options:

How to search?

Restricted Document

You are accessing a password protected document.
Please choose an option below

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this restricted document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Print password request form:

Before we can grant you access to our confidential documents you are required to fill in, print and sign the password request form by which you comply with the NXP Non-disclosure agreement (NDA). Please email or fax the signed form to the email-address or fax-number specified on the form. After approval you will receive username and password via email. In case you already signed an NDA with NXP and already have username and password, you can skip this step.

Open document:

If you have received the username and password, you can open the document by clicking on the "open document" link. You will be prompted for username and password. After you fill in the username and password the download will start.

Forgot your password:

In case you forgot your password you can click on the "forgot your password" link to retrieve your password. Please complete the small form with your personal details and your request will be sent to NXP. You will receive an answer with your password shortly.

Request secure documentation

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this secure document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Datasheet confidential

Fill in your details and you will be contacted

First name*

Last name*

Company*

Country*

Telephone number*

E-mail*

* required.

Your e-mail address will only be used to send the datasheet and will not be used for any other purposes.

No datasheet available

Fill in your details to receive notification when the datasheet becomes available

First name*

Last name*

Company*

E-mail*

* required.

Your email address will only be used to send the datasheet and will not be used for any other purposes.