TFF1017HN

Integrated mixer oscillator PLL for satellite LNB


Quick ordering

DistributorIn Stock
OR:  

The TFF1017HN is an integrated downconverter for use in Low Noise Block (LNB) convertors in a 10.7 GHz to 12.75 GHz Ku band satellite receiver system.

Features and benefits

  • Low current integrated pre/buffer amplifier, mixer and PLL synthesizer
  • Flat gain over frequency
  • Single 5 V supply pin
  • Low cost 25 MHz crystal
  • Crystal controlled LO frequency generation
  • Switched LO frequency (9.75 GHz and 10.6 GHz)
  • Low phase noise
  • Low spurious
  • Low external component count
  • Alignment-free concept
  • ESD protection on all pins

Applications

  • Ku band LNB converters for digital satellite reception (DVB-S)
  • Ku band LNB converters for digital satellite reception (DVB-S2)
All information on this product information page is subject to the subsequent disclaimers:
Go to the parametric search
Parametric search

Show functional diagram

Fully integrated mixer oscillator downconverter
Fully integrated mixer oscillator downconverter

Parametrics of this product

SymbolParameterConditionsMinTyp/NomMaxUnit
fi(RF)RF input frequencylow band10.711.7GHz
fi(RF)RF input frequencyhigh band11.712.8GHz
VCCsupply voltage4.555.5V
ICCsupply currentRF input and IF output AC coupled [0]52mA
Gconvconversion gainmeasured at low band fIF = 1450 MHz and high band fIF = 1625 MHz42dB
IP3Ooutput third-order intercept pointcarrier power is -10 dBm (measured at output)15dBm
NFSSBsingle sideband noise figuremeasured at low band fIF = 1450 MHz and high band fIF = 1625 MHz7dB
fLOLO frequencylow band9.8GHz
fLOLO frequencyhigh band10.6GHz
φnλ(itg)integrated phase noise density10 kHz ≤ foffset(integration) ≤ 13000 kHz1.5deg

Similar products

Products / Packages

Type numberOrderable part numberOrdering code (12NC)Product statusPackagePackingMarking
TFF1017HN/N1TFF1017HN/N1,1359352 933 36135Volume productionSOT763-1
(DHVQFN16) 		Reel Pack, SMD, LargeStandard Marking
TFF1017HN/N1TFF1017HN/N1,1159352 933 36115Volume productionSOT763-1
(DHVQFN16) 		Reel Pack, SMD, 7"Standard Marking

Pinning information

PinSymbolDescriptionSimplified outlineGraphic symbol
0GNDground (exposed die pad)SOT763-1 (DHVQFN16)Graphic symbol
1HBHigh band / low band selection. Connect this pin to the tone detector or to a logic signal.
2RF_GND1RF ground. Connect this pin to the exposed die pad landing and the RF input CPW line.
3RF1RF input. Internally connected to RF2 (pin 4).
4RF2RF input. Internally connected to RF1 (pin 3).
5RF_GND2RF ground. Connect this pin to the exposed die pad landing and the RF input CPW line.
6GND1Ground. Connect this pin to the exposed die pad landing and the RF input CPW line.
7REG_GNDRegulator ground. Connect this pin to the exposed die pad landing.
8LFLoop filter PLL. Connect loop filter between this pin and VREG (pin 9).
9VREGRegulated output voltage for VCO loop filter. Connect loop filter to this pin. Decouple against REG_GND (pin 7).
10XO_GNDCrystal oscillator ground. Connect this pin to the exposed die pad landing.
11XO2Crystal connection 2. Connect crystal between this pin and XO1 (pin 12).
12XO1Crystal connection 1. Connect crystal between this pin and XO2 (pin 11).
13GND2Ground. Connect this pin to the exposed die pad landing.
14IFIF output
15IF_GNDIF output ground. Connect this pin to the exposed die pad landing and the output transmission line ground.
16VCCSupply voltage

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHSLeadfree conversion dateRHFIFR (FIT)MTBF (hours)MSLMSL LF
TFF1017HN/N1TFF1017HN/N1,135TFF1017HN/N1Always Pb-free11
TFF1017HN/N1TFF1017HN/N1,115TFF1017HN/N1Always Pb-free11
Quality and reliability disclaimer

Quality and reliability disclaimer

Important Legal Notice on the product/generic quality information, No Warranty

NXP Semiconductors is providing this data for your convenience only. Please note however that NO WARRANTY, REPRESENTATION, GUARANTEE OR LEGALLY BINDING PRODUCT DESCRIPTION is provided by publishing this informational data, nor does NXP Semiconductors acknowledge or accept any liability related thereto. The documentation and data on NXP Semiconductors products can be found in the data sheets as officially published by NXP Semiconductors. For all purchase of products from NXP Semiconductors the NXP Semiconductors' General Terms and Conditions of Commercial Sale will apply.

NXP SEMICONDUCTORS PROVIDES THE DATA HEREUNDER “AS IS” WITHOUT WARRANTY WHATSOEVER. NXP SEMICONDUCTORS DOES NOT WARRANT OR REPRESENT THAT ANY DATA PROVIDED ON THIS WEBSITE IS CORRECT OR FIT FOR A PARTICULAR PURPOSE WHATSOEVER. IT IS PROVIDED WITHOUT ANY WARRANTY WHATSOEVER, WHETHER EXPRESS, IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS NONINFRINGEMENT OF INTELLECTUAL PROPERTY OR OTHERWISE AND MAY BE CHANGED, MODIFIED OR DELETED BY NXP SEMICONDUCTORS AT ANY TIME.

Any use of the data provided hereunder is at your own risk.

IN NO EVENT SHALL NXP SEMICONDUCTORS, BE LIABLE FOR ANY DIRECT, SPECIAL, INDIRECT, CONSEQUENTIAL, PUNITIVE, OR INCIDENTAL DAMAGES (INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS, BUSINESS INTERRUPTION, LOSS OF USE, LOSS OF DATA OR INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OF THE DATA, WHETHER OR NOT BASED ON TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT, BREACH OF WARRANTY OR ANY OTHER THEORY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED ABOVE AND ALL GENERAL DAMAGES), THE ENTIRE LIABILITY OF NXP SEMICONDUCTORS, AND YOUR EXCLUSIVE REMEDY FOR ALL OF THE FOREGOING SHALL BE LIMITED TO ACTUAL DAMAGES INCURRED BY YOU BASED ON REASONABLE RELIANCE UP TO ONE DOLLARS (US$1.00). THE FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.

Your use of this data, and all consequences of such use, is solely your responsibility. You must perform sufficient engineering and additional qualification testing in order to properly evaluate your application and determine whether a candidate NXP Semiconductors device is suitable for use in that application.

NXP Semiconductors' products are specifically designed and manufactured to be used within the electrical, thermal, mechanical and other parameters set forth in NXP Semiconductors' data sheets. Quality and reliability data provided by NXP Semiconductors, such as MTBF, MSL and FIT, is intended to be a non-binding estimate of product performance based upon diffusion process, history only. It does not imply that any performance levels reflected in such data can be met if the product is operated outside the conditions expressly stated in the latest published data sheet for a device or in your application.

The RoHS data provided hereunder is preliminary and non binding for NXP Semiconductors. NXP Semiconductors does not accept any liability related to this data.

NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage nor for any other use that is not explicitly agreed between the parties. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk.

Any use of NXP Semiconductors' products beyond the scope defined in the current NXP Semiconductors' data sheet voids all warranty responsibility of NXP Semiconductors with respect to such devices, and also voids all responsibility of NXP Semiconductors with respect to any applications assistance, product design, software performance or services of any kind that were or may have been performed in connection with the sale of any such devices.

Further, resale of NXP Semiconductors' products or services with statements different from or beyond the parameters stated by NXP Semiconductors for that product in official NXP Semiconductors data sheets, or without the warnings or instructions provided by NXP Semiconductors, voids all express and any implied warranties for the associated NXP Semiconductors product or service, and is an unfair and deceptive business practice.

Documentation for this product

Ordering & availability

Type numberOrdering code(12NC)Orderable part numberRegionDistributorIn stockOrder quantityInventory dateBuy onlineSamples
TFF1017HN/N19352 933 36135TFF1017HN/N1,135      not available
TFF1017HN/N19352 933 36115TFF1017HN/N1,115NADIGI-KEY CORPORATION5,9905/23/2012Buy online 
   NAAVNET EXPRESS1005/23/2012Buy online 
   ASIASACL - Hong Kong/Chinayes300005/01/2012Buy online 

Sample

Sample orders normally take 2-4 days for delivery.
If you do not have a direct account with NXP our network of global and regional distributors is available and equipped to support you with NXP samples. As a NXP customer you also have the option to order samples via our sales organisation.

Technical support

Do you want to ask technical questions to an NXP expert?
Please select one of the following options:

How to search?

Restricted Document

You are accessing a password protected document.
Please choose an option below

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this restricted document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Print password request form:

Before we can grant you access to our confidential documents you are required to fill in, print and sign the password request form by which you comply with the NXP Non-disclosure agreement (NDA). Please email or fax the signed form to the email-address or fax-number specified on the form. After approval you will receive username and password via email. In case you already signed an NDA with NXP and already have username and password, you can skip this step.

Open document:

If you have received the username and password, you can open the document by clicking on the "open document" link. You will be prompted for username and password. After you fill in the username and password the download will start.

Forgot your password:

In case you forgot your password you can click on the "forgot your password" link to retrieve your password. Please complete the small form with your personal details and your request will be sent to NXP. You will receive an answer with your password shortly.

Request secure documentation

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this secure document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Datasheet confidential

Fill in your details and you will be contacted

First name*

Last name*

Company*

Country*

Telephone number*

E-mail*

* required.

Your e-mail address will only be used to send the datasheet and will not be used for any other purposes.

No datasheet available

Fill in your details to receive notification when the datasheet becomes available

First name*

Last name*

Company*

E-mail*

* required.

Your email address will only be used to send the datasheet and will not be used for any other purposes.