BLM6G10-30

W-CDMA 860 MHz to 960 MHz power MMIC


Quick ordering

DistributorIn Stock
OR:  

30 W LDMOS 2-stage power MMIC for base station applications at frequencies from 860 MHz to 960 MHz. Available in Gull Wing for surface mount (SOT822-1) or flat lead (SOT834-1)

Features and benefits

  • Integrated temperature compensated bias
  • Excellent thermal stability
  • Biasing of individual stages is externally accessible
  • Integrated ESD protection
  • Small component size, very suitable for PA size reduction
  • On-chip matching (input matched to 50 Ohm, output partially matched)
  • High power gain
  • Designed for broadband operation (860 MHz to 960 MHz)

Applications

  • Driver for Base Station applications
All information on this product information page is subject to the subsequent disclaimers:
Go to the parametric search
Parametric search

Parametrics of this product

SymbolParameterConditionsMinTyp/NomMaxUnit
frangefrequency range860960MHz
PL(1dB)nominal output power at 1 dB gain compression30W
Test signal: 2-c WCDMA
PL(AV)average output power2W
Gppower gainVDS = 28 V; PL(AV) = 2 W272931dB
RLininput return lossVDS = 28 V; PL(AV) = 2 W-15-12dB
ηDdrain efficiencyVDS = 28 V; PL(AV) = 2 W; 920 MHz < f < 960 MHz1011.5%
ACPRadjacent channel power ratioPL(AV) = 2 W; VDS = 28 V; IDq = 105 mA; 920 MHz < f < 960 MHz-52-48.5dBc
IMD3third-order intermodulation distortionVDS = 28 V; PL(AV) = 2 W-48.5-45dBc

Similar products

Package

Type numberOrderable part numberOrdering code (12NC)Product statusPackagePackingMarking
BLM6G10-30BLM6G10-30,1189340 608 92118Volume productionSOT834-1
(HSOP16F) 		Reel Pack, SMD, 13"Standard Marking

The variants in the table below are discontinued. See the table Discontinuation information at the bottom of this page for more information.

Type numberOrderable part numberOrdering code (12NC)Product statusPackagePackingMarking
BLM6G10-30BLM6G10-30,1279340 608 92127Withdrawn
Replacement product		SOT834-1
(HSOP16F) 		Horizontal, Rail PackStandard Marking

Pinning information

PinSymbolDescriptionSimplified outlineGraphic symbol
1GNDGROUNDBLM6G10-30; BLM6G10-30G; Pin configuration diagram (SOT834-1)SOT834-1 (HSOP16F)
2VDS1VDS1
3n.c.no connection
4n.c.no connection
5n.c.no connection
6RF_INPUTRF_INPUT
7n.c.no connection
8VGS1VGS1
9VGS2VGS2
10VDS1VDS1
11GNDGROUND
12GNDGROUND
13n.c.no connection
14RF_OUTPUT/VDS2RF_OUTPUT/VDS2
15n.c.no connection
16GNDGROUND
flangeRF_GROUNDRF_GROUND

Outline drawing

Package VersionPackage NamePackage DescriptionReference CodesIssue Date
SOT834-1HSOP16Fplastic, heatsink small outline package; 16 leads (flat)2003-10-22

Related documents

Reflow soldering

Discontinuation information

Type numberOrdering code (12NC)Last-time buy dateLast-time delivery dateReplacement productDN NoticeStatusComments
BLM6G10-30934060892127DN

Quality, reliability & chemical content

Type numberOrderable part numberChemical contentRoHSLeadfree conversion dateRHFIFR (FIT)MTBF (hours)MSLMSL LF
BLM6G10-30BLM6G10-30,118BLM6G10-3033

The variants in the table below are discontinued. See the table Discontinuation information at the bottom of this page for more information.

Type numberOrderable part numberChemical contentRoHSLeadfree conversion dateRHFIFR (FIT)MTBF (hours)MSLMSL LF
BLM6G10-30BLM6G10-30,127BLM6G10-30
Quality and reliability disclaimer

Quality and reliability disclaimer

Important Legal Notice on the product/generic quality information, No Warranty

NXP Semiconductors is providing this data for your convenience only. Please note however that NO WARRANTY, REPRESENTATION, GUARANTEE OR LEGALLY BINDING PRODUCT DESCRIPTION is provided by publishing this informational data, nor does NXP Semiconductors acknowledge or accept any liability related thereto. The documentation and data on NXP Semiconductors products can be found in the data sheets as officially published by NXP Semiconductors. For all purchase of products from NXP Semiconductors the NXP Semiconductors' General Terms and Conditions of Commercial Sale will apply.

NXP SEMICONDUCTORS PROVIDES THE DATA HEREUNDER “AS IS” WITHOUT WARRANTY WHATSOEVER. NXP SEMICONDUCTORS DOES NOT WARRANT OR REPRESENT THAT ANY DATA PROVIDED ON THIS WEBSITE IS CORRECT OR FIT FOR A PARTICULAR PURPOSE WHATSOEVER. IT IS PROVIDED WITHOUT ANY WARRANTY WHATSOEVER, WHETHER EXPRESS, IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS NONINFRINGEMENT OF INTELLECTUAL PROPERTY OR OTHERWISE AND MAY BE CHANGED, MODIFIED OR DELETED BY NXP SEMICONDUCTORS AT ANY TIME.

Any use of the data provided hereunder is at your own risk.

IN NO EVENT SHALL NXP SEMICONDUCTORS, BE LIABLE FOR ANY DIRECT, SPECIAL, INDIRECT, CONSEQUENTIAL, PUNITIVE, OR INCIDENTAL DAMAGES (INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS, BUSINESS INTERRUPTION, LOSS OF USE, LOSS OF DATA OR INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OF THE DATA, WHETHER OR NOT BASED ON TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT, BREACH OF WARRANTY OR ANY OTHER THEORY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED ABOVE AND ALL GENERAL DAMAGES), THE ENTIRE LIABILITY OF NXP SEMICONDUCTORS, AND YOUR EXCLUSIVE REMEDY FOR ALL OF THE FOREGOING SHALL BE LIMITED TO ACTUAL DAMAGES INCURRED BY YOU BASED ON REASONABLE RELIANCE UP TO ONE DOLLARS (US$1.00). THE FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.

Your use of this data, and all consequences of such use, is solely your responsibility. You must perform sufficient engineering and additional qualification testing in order to properly evaluate your application and determine whether a candidate NXP Semiconductors device is suitable for use in that application.

NXP Semiconductors' products are specifically designed and manufactured to be used within the electrical, thermal, mechanical and other parameters set forth in NXP Semiconductors' data sheets. Quality and reliability data provided by NXP Semiconductors, such as MTBF, MSL and FIT, is intended to be a non-binding estimate of product performance based upon diffusion process, history only. It does not imply that any performance levels reflected in such data can be met if the product is operated outside the conditions expressly stated in the latest published data sheet for a device or in your application.

The RoHS data provided hereunder is preliminary and non binding for NXP Semiconductors. NXP Semiconductors does not accept any liability related to this data.

NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage nor for any other use that is not explicitly agreed between the parties. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk.

Any use of NXP Semiconductors' products beyond the scope defined in the current NXP Semiconductors' data sheet voids all warranty responsibility of NXP Semiconductors with respect to such devices, and also voids all responsibility of NXP Semiconductors with respect to any applications assistance, product design, software performance or services of any kind that were or may have been performed in connection with the sale of any such devices.

Further, resale of NXP Semiconductors' products or services with statements different from or beyond the parameters stated by NXP Semiconductors for that product in official NXP Semiconductors data sheets, or without the warnings or instructions provided by NXP Semiconductors, voids all express and any implied warranties for the associated NXP Semiconductors product or service, and is an unfair and deceptive business practice.

Discontinuation information

Type numberOrdering code (12NC)Last-time buy dateLast-time delivery dateReplacement productDN NoticeStatusComments
BLM6G10-30934060892127DN

Documentation for this product

File nameTitleTypeFormatDate
BLM6G10-30_BLM6G10-30GW-CDMA 860 MHz - 960 MHz power MMICData sheetpdf2011-03-02
AN10896Mounting and Soldering of RF transistorsApplication notepdf2012-12-19
75017347Enabling the Mobile ExperienceBrochurepdf2013-02-05
fatigue_in_aluminum_bond_wiresFatigue in aluminum bond wiresMounting and solderingpdf2009-10-08
PCB_Design_BLM6G10-30_BLM6G10-30G_Data-sheetPCB Design BLM6G10-30(G) (Data sheet)Other typezip2010-02-23
75017272NXP's RF Manual 16th editionSelection guidepdf2012-06-08

Ordering & availability

Type numberOrdering code (12NC)Orderable part numberRegionDistributorIn stockOrder quantityInventory dateBuy onlineSamples
BLM6G10-309340 608 92118BLM6G10-30,118       

Sample

Sample orders normally take 2-4 days for delivery.
If you do not have a direct account with NXP our network of global and regional distributors is available and equipped to support you with NXP samples. As a NXP customer you also have the option to order samples via our sales organisation.

Technical support

Do you want to ask technical questions to an NXP expert?
Please select one of the following options:

How to search?

Already registered to MyNXP? or Register

Feedback

Restricted Document

You are accessing a password protected document.
Please choose an option below

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this restricted document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Print password request form:

Before we can grant you access to our confidential documents you are required to fill in, print and sign the password request form by which you comply with the NXP Non-disclosure agreement (NDA). Please email or fax the signed form to the email-address or fax-number specified on the form. After approval you will receive username and password via email. In case you already signed an NDA with NXP and already have username and password, you can skip this step.

Open document:

If you have received the username and password, you can open the document by clicking on the "open document" link. You will be prompted for username and password. After you fill in the username and password the download will start.

Forgot your password:

In case you forgot your password you can click on the "forgot your password" link to retrieve your password. Please complete the small form with your personal details and your request will be sent to NXP. You will receive an answer with your password shortly.

Request secure documentation

Fill in your name, company and e-mail address and you will receive an e-mail with a username and password for this secure document.

First name*

Last name*

Company*

E-mail*

Comments

* required.

Datasheet confidential

Fill in your details and you will be contacted

First name*

Last name*

Company*

Country*

Telephone number*

E-mail*

* required.

Your e-mail address will only be used to send the datasheet and will not be used for any other purposes.

No full datasheet available

Fill in your details to receive notification when the datasheet becomes available

First name*

Last name*

Company*

E-mail*

* required.

Your email address will only be used to send the datasheet and will not be used for any other purposes.