Energy Storage System (ESS)
The transition to renewable energy sources, electrification of vehicles and the need for resilience in power supplies have been driving a very positive trend for Li-Ion based battery storage systems.
NXP provides complete system solutions for battery management, for which leadership technologies are used for security, functional safety, detection of thermal runaway, cell monitoring, wireless and wired connectivity and microcontrollers in a broad range of performance and feature sets.
NXP’s own Transport Protocol Link technology enables modular storage at scalability with practically no limits. MCU free and SW free storage modules can be communicated through SPI, CAN FD or UART to easily scale from a few kWh capacity in residential to MWh for utility scale.
High-accuracy data can be accessed for advanced algorithms for SOC and SOH algorithms as well as optimal power management.
Application Details
Block Diagram
Interact with an application:
Recommended Products for:
ESS Including BMS for HV
Select a block to see our recommended products.
Battery Cell Controller
BPMS
- NBP8-9x: Highly Integrated Battery Pressure Monitor Sensor
Battery Sensor
Battery Gateway
MCU
- MCX A13x, 14x, 15x MCUs with Arm® Cortex® M33, Scalable Device Options, Low Power and Intelligent Peripherals
- MCX-N94X-N54X: MCX N94x/54x Highly Integrated Multicore MCUs with On-Chip Accelerators, Intelligent Peripherals and Advanced Security
- i.MX-RT1170: i.MX RT1170: 1 GHz Crossover MCU with Arm® Cortex® Cores
- LPC553x: LPC553x/S3x: Advanced Analog Arm®Cortex®-M33-Based MCU Family
- S32K1: S32K1 Microcontrollers for Automotive General Purpose
- S32K3: S32K3 Microcontrollers for Automotive General Purpose
Contactor Drivers
RTC
- PCF2131: Nano-Power Highly Accurate RTC with Integrated Quartz Crystal
HS drivers for battery cooling
MPU
- i.MX8MNANO: i.MX 8M Nano Family - Arm® Cortex®-A53, Cortex-M7
- i.MX6ULL: i.MX 6ULL Single-Core Processor with Arm® Cortex®-A7 Core
PMIC
Security
- SE050: EdgeLock® SE050: Plug and Trust Secure Element Family – Enhanced IoT Security with High Flexibility
System Basis Chip
- FS26: Safety System Basis Chip with Low Power, for ASIL D Systems
Wireless Communication
Wireless Communication
Wired Communications
- TJA1042: High-Speed CAN Transceiver with Standby Mode
- TJA1057: High-Speed CAN Transceiver - Mantis Family
- Automotive Ethernet PHYs: Automotive Ethernet PHY Transceivers
Wired Communications
- TJA1042: High-Speed CAN Transceiver with Standby Mode
- TJA1057: High-Speed CAN Transceiver - Mantis Family
- Automotive Ethernet PHYs: Automotive Ethernet PHY Transceivers
Recommended Products for:
ESS Including BMS for 48V
Select a block to see our recommended products.
Battery Cell Controller
- MC33771C: 14-Channel Li-Ion Battery Cell Controller IC
BPMS
- NBP8-9x: Highly Integrated Battery Pressure Monitor Sensor
Battery Gateway
MCU
- MCX A13x, 14x, 15x MCUs with Arm® Cortex® M33, Scalable Device Options, Low Power and Intelligent Peripherals
- MCX-N94X-N54X: MCX N94x/54x Highly Integrated Multicore MCUs with On-Chip Accelerators, Intelligent Peripherals and Advanced Security
- i.MX-RT1170: i.MX RT1170: 1 GHz Crossover MCU with Arm® Cortex® Cores
- LPC553x: LPC553x/S3x: Advanced Analog Arm®Cortex®-M33-Based MCU Family
- S32K1: S32K1 Microcontrollers for Automotive General Purpose
- S32K3: S32K3 Microcontrollers for Automotive General Purpose
Contactor Drivers
RTC
- PCF2131: Nano-Power Highly Accurate RTC with Integrated Quartz Crystal
MPU
- IMX8MPLUS: i.MX 8M Plus – Arm® Cortex®-A53, Machine Learning, Vision, Multimedia and Industrial IoT
- i.MX8MNANO: i.MX 8M Nano Family - Arm® Cortex®-A53, Cortex-M7
- i.MX6ULL: i.MX 6ULL Single-Core Processor with Arm® Cortex®-A7 Core
PMIC
Security
- SE050: EdgeLock® SE050: Plug and Trust Secure Element Family – Enhanced IoT Security with High Flexibility
System Basis Chip
- FS26: Safety System Basis Chip with Low Power, for ASIL D Systems
Wireless Communication
Wireless Communication
HS Drivers for Battery Cooling
Wired Communications
- TJA1042: High-Speed CAN Transceiver with Standby Mode
- TJA1057: High-Speed CAN Transceiver - Mantis Family
- Automotive Ethernet PHYs: Automotive Ethernet PHY Transceivers
Wired Communications
- TJA1042: High-Speed CAN Transceiver with Standby Mode
- TJA1057: High-Speed CAN Transceiver - Mantis Family
- Automotive Ethernet PHYs: Automotive Ethernet PHY Transceivers
Designs
Reference Design
1500 V Battery Energy Storage Reference Design
The RD-BESS1500BUN is a complete reference design bundle for high-voltage battery energy storage systems, targeting IEC 61508, SIL-2 and IEC 60730, Class-B.
Reference Design
BESS1500 Battery Junction Box (BJB)
The RDBESS772BJBEVB is a Battery Junction Board, part of RD-BESS1500BUN for HV BESS.
The RD-BESSK358BMU is a Battery Management Unit, part of RD-BESS1500BUN for HV BESS.
Reference Design
BESS1500 Cell Monitoring Unit (CMU) with 3x 18S Capability
The RDBESS774A3EVB is a Cell Management Unit for up to 54 battery cells, part of RD-BESS1500BUN for HV BESS.
Reference Design
BESS1500 Cell Monitoring Unit (CMU) with 18S Capability
The RDBESS774A1EVB is a Cell Management Unit for up to 18 battery cells, part of RD-BESS1500BUN for HV BESS.