Permanent Magnet Synchronous Motor

Overview

Category Products Features
Power Stage Driver
3-Phase Brushless Motor Pre-Driver Three-Phase MOSFET Pre-Driver, 6V-58V, -20 to +105
3 Phase Field Effect Transistor Pre-driver For >40 VDC, 3ph FET pre-driver
Controllers (MCU and DSC)
Kinetis® KV1x-75 MHz,  Entry-level 3ph FOC / Sensorless Motor Control MCUs based on Arm® Cortex®-M0+ 75Mhz CM0+ CPU with hardware square root and divide to further improve performance. Flextimer and dual ADC for low dynamic motor control applications.
Kinetis® KV3x-100–120 MHz,  Advanced 3ph FOC / Sensorless Motor Control MCUs based on Arm® Cortex®-M4 100/120MHz CM4F CPU for high performance, high dynamic applications. Flextimer and dual ADC for advanced control applications.
Kinetis KV4x-168 MHz, High Performance Motor / Power Conversion MCUs based on Arm® Cortex®-M4 168MHz CM4F for advanced single motor and multi-motor systems. 4.1MSPS ADC and advanced eFlexPWM for the most demanding applications.
Kinetis® KV5x-240 MHz, Motor Control and Power Conversion, Ethernet, MCUs based on Arm® Cortex®-M7 240MHz CM7 core, with 4x5MSPS ADC and 44 timer channels including 24ch eFlexPWM for the most demanding motor applications, combined with ENET for communications.
Digital Signal Controllers Fast ADC, 32-bit DSP core, quadrature decoder, flexible advanced timer
S12ZVM Mixed-Signal MCU for Automotive & Industrial Motor Control Applications S12Z based MCU with embedded 12V to 5V voltage regulator, LIN phy and 3phase bridge gate driver
MC56F823xx and MC56F827xx Digital Signal Controllers Low-power operation enables higher system efficiency due to lower power losses
32-bit Automotive General Purpose Microcontrollers S32K is a series of 32-bit automotive MCUs based on ARM® Cortex-M® processors with Safety and Security HW support
Ultra-Reliable MPC574xP MCU for Automotive & Industrial Safety Applications 32-Bits MCUs meet the highest functional safety standards for automotive and industrial safety domain control applications.
Ultra-Reliable MPC560xP MCU for Automotive & Industrial Safety Applications 32-bit MCUs enable electronic replacement for heavy hydraulic and engine-driven systems in automotive and industrial applications.
Ultra-Reliable Dual-Core 32-bit MCU for Automotive and Industrial Applications MPC564xL 32-bit MCUs reduce design complexity with key functional safety features on a single chip for automotive and industrial safety application.
Software and Tools
FreeMASTER Run-Time Debugging Tool Real-time control and debugging tool for Digital Signal Controllers.
Real Time Control Embedded Software Motor Control and Power Conversion Libraries Embedded Software and Motor Control Libraries.
Model-Based Design Toolbox A comprehensive collection of tools that plug into the MATLAB®/Simulink® model-based design environment to support rapid application development with NXP® MCUs.
Motor Control Application Tuning (MCAT) Tool MCAL is intended for the development of PMSM FOC applications, real time control structure parameter tuning.
Communications
Power Supply with Multiple Linear Regulators Switchmode power supply with multiple linear regulators
High-speed CAN transceiver with Standby mode High Speed CAN I/F
SBC Gen2 with High-Speed CAN and LIN System Basis Chip with LIN and highspeed CAN I/Fs
System Basis Chip Gen2 with High Speed CAN System Basis Chip with highspeed CAN I/Fs
SBC Gen2 with High-Speed CAN and LIN System Basis Chip with LIN and highspeed CAN I/Fs
5.0A 1.0MHz Integrated Dual Switch-Mode Power Supply 5.0A, 0.7V/3.6V adj., dual switchmode power supply