The Electrocardiograph (ECG) Accessory features NXP® sensors and MCUs to monitor the user’s heart rate.
This iPod app-based solution uses a function-specific sensor that measures heart rate signals and then sends the data to a smart phone application for sharing with a healthcare provider.
The same approach could be used for designs such as pressure-based altimeters, breathalyzers, weather monitoring stations, and blood glucose monitors.
Speed development time when designing your portable medical device with Our Healthcare Analog Front End (AFE) reference platform which includes a complete hardware platform, schematics and software. Based on the Kinetis Microcontroller K53 measurement.
|Microcontrollers (MCU) and Processors (MPU)|
|i.MX28 Applications Processors: Integrated Power Management Unit (PMU), Arm9™ Core||ARM9®, single-core, 454MHz, display, 10/100 ETH, CAN, PMU, <1W|
|i.MX 6Solo Processors – Single-Core, Multimedia, 3D Graphics, ARM Cortex-A9 Core||ARM® Cortex™-A9, single-core, up to 1GHz, display, graphics, video, 10/100/1000 ETH, CAN, PCIe, PMU|
|Multimedia Applications Processors - Data Acquisition, User Interaction, Connectivity, ARM9™ Core||ARM9® processor, SVGA, 10/100 ETH, CAN, 400 MHz, <1W|
|Multimedia Applications Processors - HD Video, High-end, advanced applications, ARM® Cortex®-A8 Core||VGA, graphics, ETH+CAN, 800 MHz <2W|
|Kinetis® K20-72 MHz, Full-Speed USB, Mixed-Signal Integration Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core||MCU with ARM® Cortex™-M4 Core, 1MB flash, USB|
|Kinetis® K50-72 MHz, USB Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core||Integrated OPAMPS, TRIAMPS, USB, Ethernet and segment LCD controller|
|Kinetis® K60-100 MHz, Mixed-Signal Integration Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core||MCU with ARM® Cortex™-M4 Core, 1M flash, 10/100 ETH, Floating Point|
|Flexis 32-bit ColdFire® V1 MCUs||32-bit ultra-low-power MCU, 256K flash, USB|
|Flexis 32-bit ColdFire® V1 Microcontroller||32-bit low-Power MCU, 128K flash|
|One-Stop-Shop Connectivity 32-bit microcontrollers||32-bit MCU, USB, 10/100 ETH, CAN|
|V2 Microprocessor with Touchscreen, LCD Controller and USB||32-bit Low-cost MPU, LCD, USB OTG, CAN|
|32-bit Power Architecture® Microcontrollers||32-bit Embedded Processor, e300 Core, I2C, CAN, ETH, USB|
|Arm ® Cortex®-A5 based Microprocessors with 1.5MB SRAM, LCD, security, 2x Ethernet, L2 switch.||Single-core ARM® Cortex™-A5, up to 500 MHz, 512 KB L2 cache, dual USB 2.0 OTG with integrated PHY, dual 10/100 Ethernet with L2 switch|
|ARM Cortex-A5 + Cortex-M4 MPUs, 1.5 MB SRAM, LCD, security, Ethernet, L2 switch||Dual-core ARM® Cortex™-A5 and Cortex™-M4, dual USB 2.0 OTG with integrated PHY, dual 10/100 Ethernet with L2 switch|
|Keypad or Touch Screen|
|Touch-Sensing for MCUs||Xtrinsic touch-sensing Software, converts S08 and ColdFire V1 MCUs into touch sensors|
|Proximity Capacitive Touch Sensor Controller||2 or 3-pad touch sensor|
|NXP® Touch-Sensing Platform, a Ready Play® Solution||Resistive screen controller with basic gesture recognition, and up to four capacitive touch-sensing electrodes|
|Multi-channel Power Management IC (PMIC)|
|2.4 GHz 802.15.4 RF and 8-bit HCS08 MCU with 60KB Flash, 4KB RAM||2.4 GHz SiP, sensing and control|
|2.4 GHz 802.15.4 RF and 8-bit HCS08 MCU with up to 82KB Flash, 5KB RAM||2.4 GHz wireless system on chip with S08 MCU|
|8-bit General Purpose Ultra-Low-End Market KA MCUs||8-bit low-cost MCU|
|8-bit USB JS MCUs||8-bit low-cost MCU, USB|
|8-bit Flexis USB MM128/64/32 MCUs||8-bit ultra-low-power MCU, USB|
|8-bit Flexis QE MCUs||8-bit ultra-low-power MCU|