Flow meters help Smart Cities measure the volume of natural gas or water at a specific time or over a long period. The measurement is then displayed on low-power segment LCDs, often driven by segment LCD drivers on a MCU.
Advanced flow meters incorporate RF communication interfaces for connecting to one-way or two-way RF meter reading systems.
|KL8x: Kinetis® KL8x-72/96 MHz Secure Ultra-Low Power Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core||Low Power Performance, 20uA/hr. Adds SPIFi for scalable memory platform at lowest cost. RNG and additional security features.|
|KL3x: Kinetis® KL3x-48 MHz, Segment LCD Ultra-Low-Power Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core||Combines ultra-low power performance with a rich suite of analog, communication, timing, and control peripherals|
|NTAG I²C: Energy-harvesting NFC Forum Type 2 Tag for home appliances||Read consumption even if display is damaged.|
|PCF85133U: Universal LCD driver for low multiplex rates||Lowest system power consumption 100nA.|
|Home Area Network|
|JN5169: ZigBee and IEEE802.15.4 wireless microcontroller with 512 kB Flash, 32 kB RAM||On board PA upto 10dBm. Integrated Protocol stacks inc SEP, HA.|
|MAG3110: High Accuracy, 3D Magnetometer||Small, low-power digital 3D magnetic sensor with a wide dynamic range to allow operation in PCBs with high extraneous magnetic fields.|
|SPI Real Time Clock|
|PCF2123: SPI Real-time clock/calendar||Lowest system power consumption 100nA.|
|PSMN4R3-80BS: N-channel 80 V, 4.3 mΩ standard level MOSFET in D2PAK||Highest efficiency with lowest RDSon versus cost.|
|LCD drivers||Selection of packaged and Chip-On-Glass devices with I2C- and/or SPI-bus interface, with or without charge pump for the internal LCD supply voltage generation.|