Temperature Logger

TEMPLOGGER

NXPs NTAG Smart Sensor portfolio offers single-chip solutions that combine NFC connectivity with autonomous sensing, data processing, and logging. These devices can be easily combined with other companion chips, such as radios or sensor solutions. NTAG Smart Sensor devices are ideal for Internet of Things (IoT) products. Data logger senses parameters such as temperature and processes this data and sends it using UHF/Bluetooth LE.

Block Diagram

Choose a diagram:

Bluetooth LE

Temperature Logger BD1

UHF

Temperature Logger BD2

Supported Devices

RFID

NTAG SmartSensor

  • NHS3100: NTAG® SmartSensor with Temperature Sensor and Digital IOs

Features

System

  • Cortex-M0+ processor running at frequencies of up to 8 MHz
  • Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC)
  • Arm serial wire debug
  • System tick timer
  • IC reset input

Memory

  • 32 kB on-chip flash programming memory
  • 4 kB on-chip EEPROM of which 256 bytes can be write protected
  • 8 kB SRAM

Digital Peripherals

  • Up to 12 General-purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors and repeater mode
  • GPIO pins, which can be used as edge and level sensitive interrupt sources
  • High-current drivers/sinks (20 mA) on four GPIO pins
  • High-current drivers/sinks (20 mA) on two I2C-bus pins
  • Programmable WatchDog timer (WDT)

QN9090 BLE

  • Up to 48MHz Cortex-M4
  • Up to 640 kB flash, up to 152 kB RAM, 128 kB ROM
  • NFC NTAG Option with EEPROM
  • Quad-SPI for execute in place or data storage in NVM
  • BLE 5.0 with 2Mbps and up to 8 simultaneous connections
N true 0 PSPTEMPLOGGERen 1 Data Sheet Data Sheet t520 1 en_US en_US en Data Sheet Data Sheet 1 1 1.2 English The product has 640 KB embedded Flash, 152 KB RAM memory. The embedded flash can support Over The Air (OTA) code download of applications. The devices include 10-channel PWM, two timers, one RTC/alarm timer, a Windowed Watchdog Timer (WWDT), two USARTs, two SPI interfaces, two I2C interfaces, a DMIC subsystem with dual-channel PDM microphone interface with voice activity detector, one 12-bit ADC, temperature sensor and comparator. 1579586382572709507720 DSP 1.4 MB None None documents None 1579586382572709507720 /docs/en/nxp/data-sheets/QN9090(T)QN9030(T).pdf 1420284 /docs/en/nxp/data-sheets/QN9090(T)QN9030(T).pdf QN9090(T)/QN9030(T) documents N N 2020-01-20 QN9090(T)/QN9030(T): Bluetooth Low Energy 5.0 wireless microcontroller /docs/en/nxp/data-sheets/QN9090(T)QN9030(T).pdf /docs/en/nxp/data-sheets/QN9090(T)QN9030(T).pdf Data Sheet N 980000996212993340 2023-10-17 pdf N en Jun 23, 2021 980000996212993340 Data Sheet Y N QN9090(T)/QN9030(T): Bluetooth Low Energy 5.0 wireless microcontroller false 0 TEMPLOGGER downloads en true 0 Y DSP Data Sheet 1 /docs/en/nxp/data-sheets/QN9090(T)QN9030(T).pdf 2020-01-20 1579586382572709507720 DSP 1 Jun 23, 2021 Data Sheet The product has 640 KB embedded Flash, 152 KB RAM memory. The embedded flash can support Over The Air (OTA) code download of applications. The devices include 10-channel PWM, two timers, one RTC/alarm timer, a Windowed Watchdog Timer (WWDT), two USARTs, two SPI interfaces, two I2C interfaces, a DMIC subsystem with dual-channel PDM microphone interface with voice activity detector, one 12-bit ADC, temperature sensor and comparator. None /docs/en/nxp/data-sheets/QN9090(T)QN9030(T).pdf English documents 1420284 None 980000996212993340 2023-10-17 N /docs/en/nxp/data-sheets/QN9090(T)QN9030(T).pdf QN9090(T)/QN9030(T): Bluetooth Low Energy 5.0 wireless microcontroller /docs/en/nxp/data-sheets/QN9090(T)QN9030(T).pdf documents 980000996212993340 Data Sheet N en None Y pdf 1.2 N N QN9090(T)/QN9030(T): Bluetooth Low Energy 5.0 wireless microcontroller 1.4 MB QN9090(T)/QN9030(T) N 1579586382572709507720 true Y Designs

Documentation

Quick reference to our documentation types.

Filters

1 documents

Support

What do you need help with?

  • Narrow your search
Search