For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Design Center
Training
S32Z and S32E Real-Time Processors FlexLLCE Introduction

S32Z and S32E Real-Time Processors FlexLLCE Introduction

About This Training

This training will introduce you to the FlexLLCE with an overview and demonstration of how it helps offload the controller area network (CAN) communications in different configurations. With FlexLLCE, a real-time processor in zonal and domain controller applications communicates with multiple nodes, sensors and actuators through legacy and modern communication protocols. In this session, we cover how FlexLLCE for S32Z and S32E—as a second-generation of low-latency communication engine—manages the multiple CAN FD and FlexCAN nodes.

Presentation

S32Z and S32E Real-Time Processors FlexLLCE Introduction

What You Will Learn

Gain an overview of FlexLLCE including the subsystem, use cases (low-latency I/O and routing)
Grasp configuring and use of the CAN Hub
Explore implementation of secure message authentication
Study the CAN-to-Ethernet gateway configuration
Discover message routing with the RX look-up table (RXLUT)

Presented by

Masataka Yakashiro
Applications Engineer, NXP Semiconductors

DURATION

44 min

LANGUAGE

English

SKILL LEVEL

Intermediate

0Views0Likes

We are looking for ways to improve.

Take the survey.

Additional Resources

Electrification and Powertrain

Stay In the Loop

Subscribe to our newsletter to stay updated with our latest developments and if you need further assistance, we are here to help.

Subscribe Contact Support