KIT33912EVME: Evaluation Kit - 33912, SBC, DC Motor Pre-driver

Overview

graphic - block diagram

Specifications

Supported Devices

Power Management

CAN/LIN SBCs
  • MC33910 : LIN SBC with 2 x 60 mA High Side Drivers
  • MC33911 : LIN System Basis Chip with DC Motor Predriver
  • MC33912 : LIN SBC with DC Motor Predriver and Current Sense

MoreLess

Technical and Functional Specifications

Connectivity
  • Full-duplex SPI interface at frequencies up to 4.0 MHz
  • LIN transceiver capable of up to 100 kbit/s with wave shaping
  • Four high-voltage analog/logic Inputs
Power Management
  • 5.0 V low drop regulator with fault detection and low voltage reset (LVR) circuitry
  • Current sense module
  • Switched/protected 5.0 V output (used for Hall sensors)
User Components Two 50 mA high side and two 150 mA low side protected switches
General Specifications
 Configurable window watchdog

Buy

  • KIT33912EVME   Active

  • Evaluation Kit - MC33912, System Basis Chip with DC Motor Pre-driver and Current Sense
    • KIT33912EVME Hardware
    • Quick Reference Guide
    • 1 @ US
    • $154.80
      • Use Coupon
      • Distributor

        • Don't have an NXP coupon? You can purchase this product from one of our authorized distributors.

KIT33912EVME-Image
1579109330588723448640

Design Resources

Get Started

Documents   ( 4 )

Design Resources   ( 1 )

Documents

Data Sheet  ( 3 )

  • MC33910, LIN System Basis Chip with High-side Drivers - Data Sheet

    The 33910 is a Serial Peripheral Interface (SPI) controlled System Basis Chip (SBC), combining many frequently used functions in an MCU based system, plus a Local Interconnect Network (LIN) transceiver. The 33910 has a 5.0 V, 50 mA low dropout regulator with full protection and reporting features. The device provides full SPI readable diagnostics and a selectable timing watchdog for detecting errant operation. The LIN Protocol Specification 2.0 and 2.1 compliant LIN transceiver has waveshaping circuitry tha

    • PDF
    • Rev 9.0
    • Sep 11, 2015
    • 2.1 MB
    • MC33910
    • English

  • MC33911, LIN System Basis Chip with DC Motor Pre-driver - Data Sheet

    The 33911G5/BAC is a Serial Peripheral Interface (SPI) controlled System Basis Chip (SBC), combining many frequently used functions in an MCU based system, plus a Local Interconnect Network (LIN) transceiver. The 33911 has a 5.0 V, 50 mA/60 mA low dropout regulator with full protection and reporting features. The device provides full SPI readable diagnostics and a selectable timing watchdog for detecting errant operation. The LIN Protocol Specification 2.0 and 2.1 compliant LIN transceiver has waveshaping c

    • PDF
    • Rev 10.0
    • Sep 15, 2015
    • 2.2 MB
    • MC33911
    • English

  • MC33912, LIN System Basis Chip with DC Motor Pre-driver and Current Sense - Data Sheet

    • PDF
    • Rev 10.0
    • Sep 4, 2015
    • 2.6 MB
    • MC33912
    • English

User Guide  ( 1 )

  • KIT33912EVME, Evaluation Board - User Guide

    This User’s Guide provides the installation steps for the KIT33912EVME System Basis Chip with LIN Transceiver (SBCLIN)

    • PDF
    • Rev 2.0
    • Oct 21, 2009
    • 5.2 MB
    • KT33912UG
    • English

Design Resources

Design Tools & Files  ( 1 )

Printed Circuit Boards and Schematics  ( 1 )