For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

KIT34674EPEVBE: Evaluation Kit - 34674, Single-Cell Li-Ion/Li-Poly Charger

Overview

The Evaluation Kit features the MC34674, which is a fully integrated single-cell Li-Ion and Li-Polymer battery charger optimized for travel charger applications. The few external components required include a dual-color LED for charge-status indication, a negative-temperature-coefficient (NTC) thermistor circuit for setting the charge temperature window, and two decoupling capacitors.

The MC34674 tolerates an input voltage up to 28 V, which allows low-cost ac/dc converters to be used for further system-cost reduction. A charge cycle of the MC34674 includes trickle, constant-current (CC) and constant-voltage (CV) charge modes. The CC-mode current is selectable from 50 mA to 1.05 A, with 10% accuracy and the constant-output voltage in the CV-mode is fixed at 4.2 V.

The MC34674 has many features such as trickle charging for a deeply-discharged battery, an internal timer for termination to prevent charging a failed battery, charger current thermal foldback for thermal protection, and smart battery-connection verification to prevent charging in case there is no battery connected. It has a 2.6 V falling power-on-reset (POR) threshold, making it great to work with current-limited power supplies. When the charger is disabled, the BAT pin leaks less than 1 µA current from the battery.

MoreLess

Specifications

Supported Devices

Power Management

MC34674 : Single-Cell Li-Ion/Li-Polymer Battery Travel Charger

MoreLess

Technical and Functional Specifications

Power Management	28 V maximum input voltage rating with 11 V over-voltage-protection threshold ± 0.4% voltage accuracy over -20 to 70 °C Factory programmable charge current Trickle charge for fully discharged batteries
User Components	Driving a dual-color LED and smart battery-connection verification optimized for travel charger applications
General Specifications	No external MOSFET, reverse-blocking diode, or current-sense resistor is required Interface to NTC thermistor

Buy

KIT34674EPEVBE ^Active
Evaluation Kit - MC34674, High-Input-Voltage Travel Charger for 1-Cell Li-Ion/Li-Polymer Batteries
- KIT34674EPEVBE Hardware
- Quick Reference Guide

1 @ US
$84.00

Use Coupon

Availability?

Distributor

Distributor Name	Region	Inventory	Inventory Date

Upon selection of a preferred distributor, you will be directed to their web site to place and service your order. Please be aware that distributors are independent businesses and set their own prices, terms and conditions of sale. NXP makes no representations or warranties, express or implied, about distributors, or the prices, terms and conditions of sale agreed upon by you and any distributor.

Don't have an NXP coupon? You can purchase this product from one of our authorized distributors.

Design Resources

Get Started

Get Started with the KIT34674EPEVBE Evaluation kit

User Guide

“Everything you need to get started with the KIT34674EPEVBE Evaluation Kit”.

KIT34674EPEVBE, Using the High-Input-Voltage Travel Charger for Single Cell Li-Ion Batteries - User Guide
- PDF
- Rev 1.0
- Jun 18, 2009
- 267.3 KB
- KT34674UG
- English

Design Resources ( 1 )

Design Tools & Files ( 1 )
- Printed Circuit Boards and Schematics ( 1 )

Documents

Data Sheet ( 1 )

MC34674, High Input Voltage Travel Charger for Single-cell Li-Ion Batteries

The MC34674 is a fully-integrated single-cell Li-Ion battery charger optimized for travel charger applications.
- PDF
- Rev 2.0
- Nov 20, 2008
- 597.2 KB
- MC34674
- English

User Guide ( 1 )

KIT34674EPEVBE, Using the High-Input-Voltage Travel Charger for Single Cell Li-Ion Batteries - User Guide

This User Guide helps the Li-Ion battery travel charger designer to understand the MC34674 and its evaluation board. It illustrates the design procedure when using MC34674 to design a Li-Ion battery charger and the way to get the best performance of the MC34674.
- PDF
- Rev 1.0
- Jun 18, 2009
- 267.3 KB
- KT34674UG
- English

Design Resources

Design Tools & Files ( 1 )

Printed Circuit Boards and Schematics ( 1 )

KIT34674EPGRBR: Gerber files for the KIT34674EPEVBE Evaluation board

Downloadable Gerber files used to build the EVB PCB
- ZIP
- Rev A
- Sep 4, 2007
- 268.3 KB
- KIT34674EPGRBR
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file size downloads.
- View Queue

KIT34674EPEVBE: Evaluation Kit - 34674, Single-Cell Li-Ion/Li-Poly Charger

Overview

Specifications

Supported Devices

Power Management

Technical and Functional Specifications

Buy

KIT34674EPEVBE Active

Design Resources

Get Started

User Guide

Documents ( 2 )

Design Resources ( 1 )

Documents

Data Sheet ( 1 )

MC34674, High Input Voltage Travel Charger for Single-cell Li-Ion Batteries

User Guide ( 1 )

KIT34674EPEVBE, Using the High-Input-Voltage Travel Charger for Single Cell Li-Ion Batteries - User Guide

Design Resources

Design Tools & Files ( 1 )

Printed Circuit Boards and Schematics ( 1 )

KIT34674EPGRBR: Gerber files for the KIT34674EPEVBE Evaluation board

KIT34674EPEVBE ^Active