KIT08XS6421EKEVB: Evaluation Kit - MC08XS6421BEK, Quad High Side Switch

Overview

KIT08XS6421EKEVB Evaluation Board

Specifications

Supported Devices

Power Management

  • MC12XS6 : External Automotive Lighting Multi-channel eXtreme Switch

MoreLess

Technical and Functional Specifications

Evaluation module features
  • This evaluation board consists of an MC08XS6421 IC in a 32-pin SOIC-EP with exposed pads.
  • This board can control
    • Four separate 28 W bulbs
    • Two separate 55 W HID ballasts
    • Four separate LED modules
    • Four separate loads of other types
  • Device can be driven by the 16-bit SPI using KITUSBSPI with SPIGen software or with direct input signals in Fail-safe mode operation. It also offers the possibility to apply an external clock in order to drive outputs in PWM operation.
MC08XS6421 features
  • Dual 8.0 mOhm and dual 21 mOhm high side switches with high transient current capability
  • 16-bit 5.0 MHz SPI control of overcurrent profiles, channel control including PWM duty-cycles, output-ON and -OFF OpenLoad detections, thermal shut-down and prewarning, and fault reporting
  • Output current monitoring with programmable synchronization signal and battery voltage feedback
  • Limp Home mode
  • External smart power switch control
  • 6.0 to 28 V operating voltage
  • -16 V reverse polarity and ground disconnect protections
  • Compatible PCB foot print and SPI software driver among the family

Buy

  • KIT08XS6421EKEVB   Active

  • Evaluation Kit - MC08XS6421, 12 V, Dual 8.0 mOhms, Dual 21.0 mOhms, High Side Switch
    • KIT08XS6421EKEVB Hardware
    • Quick Reference Guide
    • KIT08XS6421EKEVB
    • 1 @ US
    • $68.00
    • Use Coupon
    • Distributor

    Don't have an NXP coupon? You can purchase this product from one of our authorized distributors.

Related Products

placeholder

Evaluation Kit - USB-SPI Interface, MC68HC908JW32, Dongle

Evaluation and Development Boards

1579109330588723448640

Design Resources

Get Started

Documents   ( 6 )

Design Resources   ( 1 )

Software   ( 1 )

Documents

Data Sheet  ( 1 )

User Guide  ( 5 )

  • KT12XS6UG, MC12XS6 Evaluation Boards - User Guide

    This evaluation board demonstrates the capability of the latest SMARTMOS® eXtreme Switch Gen4 family. This family offers new combinations of output channels as well as a selection of Rds(on) values. All devices are footprint-compatible; therefore, they can all be evaluated using this evaluation board.

    • PDF
    • Rev 2.0
    • Jul 18, 2014
    • 2.9 MB
    • KT12XS6UG
    • English

  • KTSPIGENSIUG, Installation Notes for SPIGen

    Evaluation Board Documentation

    • PDF
    • Rev 4.0
    • Oct 9, 2009
    • 252.7 KB
    • KTSPIGENSIUG
    • English

  • USB Additions to SPIGen

    Version 5.0.X of the SPIGen program has several new features that were added to support the new USB to SPI interface and the latest NXP evaluation board products that incorporate the USB to SPI feature.

    • PDF
    • Rev 1.0
    • Oct 15, 2007
    • 192.9 KB
    • KTUSBADSPIUG
    • English

  • KTSPIGENHELPUG, SPIGen Help Instructions

    Evaluation Board Documentation

    • PDF
    • Rev 3.0
    • Oct 9, 2009
    • 347.1 KB
    • KTSPIGENHELPUG
    • English

  • KTXSWITCH4UG, eXtreme Switch Gen4 Evaluation Board - User’s Guide

    This evaluation board demonstrates the capability of the latest eXtreme Switch Gen4 family. This family offers new combinations of output channels as well as a selection of Rdson values. All devices are footprint-compatible; therefore, they can all be evaluated using this evaluation board.

    • PDF
    • Rev 1.0
    • Nov 21, 2013
    • 3.1 MB
    • KTXSWITCH4UG
    • English

Design Resources

Design Tools & Files  ( 1 )

Printed Circuit Boards and Schematics  ( 1 )

Software

Development Software  ( 1 )

Components and Modules  ( 1 )

Get Help

Search