LPC-Link 2 is an extensible, stand-alone debug probe that can be configured to support various development tools and IDEs using a variety of different downloadable firmware images. It can also be used as an evaluation board in its own right for the NXP LPC4370 triple core MCU. Through the use of an add-on board from Embedded Artists, it can be used as an oscilloscope or logic analyzer!
The FRDM-K32L3A6 development board consists of the K32L3A6 device with a 32-Mbit external serial flash, FXOS8700 Accelerometer/Magnetometer, visible light sensor, SDHC circuit, general purpose LEDs, and general purpose pushbuttons in the popular Freedom board form-factor.
The FRDM-KW38 development kit enabled by MKW38Z512VHT4 built on Arm® Cortex®-M0+ processor with integrated 2.4 GHz transceiver supporting Bluetooth® Low Energy (BLE) v5 and Generic FSK. The KW8 integrate CAN/CAN-FD and LIN connectivity.
The LPCXpresso55S28 development board provides the ideal platform for evaluation of and development with the LPC552x/S2x MCU based on the Arm® Cortex®-M33 architecture. The board includes a high performance onboard debug probe, audio subsystem and accelerometer, with several options for adding off-the-shelf add-on boards for networking, sensors, displays, and other interfaces.
The board is comprised of target LPC1115 device and an on-board, CMSIS-DAP compatible debug probe. The on-board probe is compatible with the LPCXpresso IDE (version 7.9 onwards) and other toolchains that support the CMSIS-DAP protocol. The board is also equipped with a standard 10-pin header enabling the use of 3rd party debug probes, with a simple jumper setting required to select between the on-board or an off-board probe. The board is supported with a set of optimized drivers an examples.
The FRDM-KW38 development kit enabled by MKW38Z512VHT4 built on Arm® Cortex®-M0+ processor with integrated 2.4 GHz transceiver supporting Bluetooth® Low Energy (BLE) v5 and Generic FSK. The KW8 integrates CAN/CAN-FD and LIN connectivity.