For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Training
Getting Started with 150 MHz Arm^® Cortex^®-M33-Based MCUs: Part 3

Getting Started with 150 MHz Arm^® Cortex^®-M33-Based MCUs: Part 3

About This Training

In this third session of our series of trainings, Mark Dunnett from Arrow Electronics explains how to get started with the LPC55S16 MCU— a 150 MHz Arm^® Cortex^®-M33-based microcontroller.

Presentation

Getting Started with 150 MHz Arm^® Cortex^®-M33-Based MCUs: Part 3

What You Will Learn

Learn how to use the pins and clocks configuration tools to set up the clock tree on the LPC55S16 device for a variety of use cases
Discover how to set up the pin multiplexing to suit your application

Presented by

Mark Dunnett
Arrow Electronics

DURATION

1 hr 4 min

LANGUAGE

English

SKILL LEVEL

Beginner

0Views0Likes

We are looking for ways to improve.

Take the survey.

Additional Resources

LPC551x/S1x: Baseline Arm^® Cortex^®-M33-Based Microcontroller Family

LPC55S16-EVK: LPCXpresso55S16 Development Board

Related Trainings

Getting Started with 150 MHz Arm^® Cortex^®-M33-Based MCUs: Part 1 - Securing Sensor Interface with NXP Secure Elements and MCUs

Getting Started with 150 MHz Arm^® Cortex^®-M33-Based MCUs: Part 2

Have a question? Ask the community.

Ask our general purpose microcontrollers community and get expert advice.

Stay In the Loop

Subscribe to our newsletter to stay updated with our latest developments and if you need further assistance, we are here to help.

Subscribe Contact Support