LA_OPT_NXP_Software_License v32 January 2022 
IMPORTANT.  Read the following NXP Software License Agreement ("Agreement") completely. By 
selecting the "I Accept" button at the end of this page, or by downloading, installing, or using the 
Licensed Software, you indicate that you accept the terms of the Agreement and you acknowledge 
that you have the authority, for yourself or on behalf of your company, to bind your company to these 
terms. You may then download or install the file. In the event of a conflict between the terms of this 
Agreement and any license terms and conditions for NXP's proprietary software embedded anywhere in the 
Licensed Software file, the terms of this Agreement shall control.  If a separate license agreement for the 
Licensed Software has been signed by you and NXP, then that agreement shall govern your use of the Licensed 
Software and shall supersede this Agreement.
 
NXP SOFTWARE LICENSE AGREEMENT
This is a legal agreement between your employer, of which you are an authorized representative, or, if 
you have no employer, you as an individual ("you" or "Licensee"), and NXP B.V. ("NXP").  It concerns 
your rights to use the software provided to you in binary or source code form and any accompanying 
written materials (the "Licensed Software"). The Licensed Software may include any updates or error 
corrections or documentation relating to the Licensed Software provided to you by NXP under this 
Agreement. In consideration for NXP allowing you to access the Licensed Software, you are agreeing to 
be bound by the terms of this Agreement. If you do not agree to all of the terms of this Agreement, do 
not download or install the Licensed Software. If you change your mind later, stop using the Licensed 
Software and delete all copies of the Licensed Software in your possession or control. Any copies of the 
Licensed Software that you have already distributed, where permitted, and do not destroy will continue 
to be governed by this Agreement. Your prior use will also continue to be governed by this Agreement.
1.       DEFINITIONS
1.1.         "Affiliate" means, with respect to a party, any corporation or other legal entity that now or 
hereafter Controls, is Controlled by or is under common Control with such party; where "Control" means 
the direct or indirect ownership of greater than fifty percent (50%) of the shares or similar interests 
entitled to vote for the election of directors or other persons performing similar functions. An entity is 
considered an Affiliate only so long as such Control exists.
1.2       "Authorized System" means either (i) Licensee's hardware product which incorporates an NXP 
Product or (ii) Licensee's software program which is used exclusively in connection with an NXP Product 
and with which the Licensed Software will be integrated.      
1.3.      "Derivative Work" means a work based upon one or more pre-existing works.  A work consisting 
of editorial revisions, annotations, elaborations, or other modifications which, as a whole, represent an 
original work of authorship, is a Derivative Work.        
1.4       "Intellectual Property Rights" means any and all rights under statute, common law or equity in 
and under copyrights, trade secrets, and patents (including utility models), and analogous rights 
throughout the world, including any applications for and the right to apply for, any of the foregoing.
1.5       "NXP Product" means a hardware product (e.g. a microprocessor, microcontroller, sensor or 
digital signal processor) supplied directly or indirectly from NXP or an NXP Affiliate, unless there is a 
product specified in the Software Content Register, in which case this definition is limited to such 
product.
1.6      "Software Content Register" means the documentation which may accompany the Licensed 
Software which identifies the contents of the Licensed Software, including but not limited to 
identification of any Third Party Software, if any, and may also contain other related information as 
whether the license in 2.3 is applicable. 
1.7     "Third Party Software" means, any software included in the Licensed Software that is not NXP 
proprietary software, and is not open source software, and to which different license terms may apply. 
2.       LICENSE GRANT.  
2.1.         If you are not expressly granted the distribution license in Section 2.3 in the Software Content 
Register, then you are only granted the rights in Section 2.2 and not in 2.3.  If you are expressly granted 
the distribution license in Section 2.3 in the Software Content Register, then you are granted the rights 
in both Section 2.2 and 2.3.
2.2.      Standard License.  Subject to the terms and conditions of this Agreement, NXP grants you a 
worldwide, personal, non-transferable, non-exclusive, non-sublicensable license, solely for the 
development of an Authorized System:
(a)        to use and reproduce the Licensed Software (and its Derivative Works prepared under 
the license in Section 2.2(b)) solely in combination with a NXP Product; and
(b)        for Licensed Software provided to you in source code form (human readable), to prepare 
Derivative Works of the Licensed Software solely for use in combination with a NXP 
Product.
You may not distribute or sublicense the Licensed Software to others under the license granted in this 
Section 2.2. 
You may demonstrate the Licensed Software to your direct customers as part of an Authorized System 
so long as such demonstration is directly controlled by you and without prior approval by NXP; however, 
to all other third parties only if NXP has provided its advance, written approval (e.g. email approval) of 
your demonstrating the Licensed Software to specified third parties or at specified event(s).  You may 
not leave the Licensed Software with a direct customer or any other third party at any time. 
2.3.        Additional Distribution License.  If expressly authorized in the Software Content Register, 
subject to the terms and conditions of this Agreement, NXP grants you a worldwide, personal, non-
transferable, non-exclusive, non-sublicensable license solely in connection with your manufacturing and 
distribution of an Authorized System:
(a)            to manufacture (or have manufactured), distribute, and market the Licensed Software 
(and its Derivative Works prepared under the license in 2.2(b)) in object code (machine 
readable format) only as part of, or embedded within, Authorized Systems and not on a 
standalone basis solely for use in combination with a NXP Product.  Notwithstanding the 
foregoing, those files marked as .h files ("Header files") may be distributed in source or 
object code form, but only as part of, or embedded within Authorized Systems; and 
(b)            to copy and distribute as needed, solely in connection with an Authorized System and for 
use in combination with a NXP Product, non-confidential NXP information provided as 
part of the Licensed Software for the purpose of maintaining and supporting Authorized 
Systems with which the Licensed Software is integrated.
2.4       Separate license grants to Third Party Software, or other terms applicable to the Licensed 
Software if different from those granted in this Section 2, are contained in Appendix A. The Licensed 
Software may be accompanied by a Software Content Register which will identify that portion of the 
Licensed Software, if any, that is subject to the different terms in Appendix A. 
2.5.         You may use subcontractors on your premises to exercise your rights under Section 2.2 and 
Section 2.3, if any, so long as you have an agreement in place with the subcontractor containing 
confidentiality restrictions no less stringent than those contained in this Agreement. You will remain 
liable for your subcontractors' adherence to the terms of this Agreement and for any and all acts and 
omissions of such subcontractors with respect to this Agreement and the Licensed Software.
3.       LICENSE LIMITATIONS AND RESTRICTIONS.  
3.1.         The licenses granted above in Section 2 only extend to NXP Intellectual Property Rights that 
would be infringed by the unmodified Licensed Software prior to your preparation of any Derivative 
Work.   
3.2.         The Licensed Software is licensed to you, not sold. Title to Licensed Software delivered 
hereunder remains vested in NXP or NXP's licensor and cannot be assigned or transferred. You are 
expressly forbidden from selling or otherwise distributing the Licensed Software, or any portion thereof, 
except as expressly permitted herein. This Agreement does not grant to you any implied rights under 
any NXP or third party Intellectual Property Rights.
3.3.         You may not translate, reverse engineer, decompile, or disassemble the Licensed Software 
except to the extent applicable law specifically prohibits such restriction. You must prohibit your 
subcontractors or customers (if distribution is permitted) from translating, reverse engineering, 
decompiling, or disassembling the Licensed Software except to the extent applicable law specifically 
prohibits such restriction.
3.4.         You must reproduce any and all of NXP's (or its third-party licensor's) copyright notices and 
other proprietary legends on copies of Licensed Software.  
3.5.         If you distribute the Licensed Software to the United States Government, then the Licensed 
Software is "restricted computer software" and is subject to FAR 52.227-19.   
3.6.         You grant to NXP a non-exclusive, non-transferable, irrevocable, perpetual, worldwide, royalty-
free, sub-licensable license under your Intellectual Property Rights to use without restriction and for any 
purpose any suggestion, comment or other feedback related to the Licensed Software (including, but 
not limited to, error corrections and bug fixes).
3.7.         You will not take or fail to take any action that could subject the Licensed Software to an 
Excluded License. An Excluded License means any license that requires, as a condition of use, 
modification or distribution of software subject to the Excluded License, that such software or other 
software combined and/or distributed with the software be (i) disclosed or distributed in source code 
form; (ii) licensed for the purpose of making Derivative Works; or (iii) redistributable at no charge. 
3.8.         You may not publish or distribute reports associated with the use of the Licensed Software to 
anyone other than NXP.  You may advise NXP of any results obtained from your use of the Licensed 
Software, including any problems or suggested improvements thereof, and NXP retains the right to use 
such results and related information in any manner it deems appropriate.
4.       OPEN SOURCE.         Open source software included in the Licensed Software is not licensed under 
the terms of this Agreement but is instead licensed under the terms of the applicable open source 
license(s), such as the BSD License, Apache License or the GNU Lesser General Public License. Your use 
of the open source software is subject to the terms of each applicable license. You must agree to the 
terms of each applicable license, or you cannot use the open source software.  
5.       INTELLECTUAL PROPERTY RIGHTS.   
Upon request, you must provide NXP the source code of any derivative of the Licensed Software.
Unless prohibited by law, the following paragraph shall apply.  Your modifications to the Licensed 
Software, and all intellectual property rights associated with, and title thereto, will be the property of 
NXP.  You agree to assign all, and hereby do assign all rights, title, and interest to any such modifications 
to the Licensed Software to NXP and agree to provide all assistance reasonably requested by NXP to 
establish, preserve or enforce such right.  Further, you agree to waive all moral rights relating to your 
modifications to the Licensed Software, including, without limitation, all rights of identification of 
authorship and all rights of approval, restriction, or limitation on use or subsequent 
modification.  Notwithstanding the foregoing, you will have the license rights granted in Section 2 
hereto to any such modifications made by you or your licensees.
Otherwise, you agree to grant an irrevocable, worldwide, and perpetual license to NXP to make, have 
made, use, sell, offer to sell, import, commercialize, sublicense and reproduce your modifications or 
derivative works to the Licensed Software without any payment to Licensee. You agree to provide all 
assistance reasonably requested by NXP to establish, preserve or enforce such right.
6.       ESSENTIAL PATENTS.    NXP has no obligation to identify or obtain any license to any Intellectual 
Property Right of a third-party that may be necessary for use in connection with technology that is 
incorporated into the Authorized System (whether or not as part of the Licensed Software).
7.       TERM AND TERMINATION.   This Agreement will remain in effect unless terminated as provided in 
this Section.
7.1.         You may terminate this Agreement immediately upon written notice to NXP at the address 
provided below.
7.2.         Either party may terminate this Agreement if the other party is in default of any of the terms 
and conditions of this Agreement, and termination is effective if the defaulting party fails to correct such 
default within 30 days after written notice thereof by the non-defaulting party to the defaulting party at 
the address below.
7.3.         Notwithstanding the foregoing, NXP may terminate this Agreement immediately upon written 
notice if you: breach any of your confidentiality obligations or the license restrictions under this 
Agreement;  become bankrupt, insolvent, or file a petition for bankruptcy or insolvency; make an 
assignment for the benefit of its creditors; enter proceedings for winding up or dissolution; are dissolved; 
or are nationalized or become subject to the expropriation of all or substantially all of your business or 
assets.
7.4.         Upon termination of this Agreement, all licenses granted under Section 2 will expire.
7.5.         After termination of this Agreement by either party   you will destroy all parts of Licensed 
Software and its Derivative Works (if any) and will provide to NXP a statement certifying the same.
7.6.         Notwithstanding the termination of this Agreement for any reason, the terms of Sections 1 and 
3 through 24 will survive.  
8.        SUPPORT.  NXP is not obligated to provide any support, upgrades or new releases of the Licensed 
Software under this Agreement. If you wish, you may contact NXP and report problems and provide 
suggestions regarding the Licensed Software. NXP has no obligation to respond to such a problem report 
or suggestion. NXP may make changes to the Licensed Software at any time, without any obligation to 
notify or provide updated versions of the Licensed Software to you.
9.        NO WARRANTY.  To the maximum extent permitted by law, NXP expressly disclaims any warranty 
for the Licensed Software. The Licensed Software is provided "AS IS", without warranty of any kind, 
either express or implied, including without limitation the implied warranties of merchantability, fitness 
for a particular purpose, or non-infringement. You assume the entire risk arising out of the use or 
performance of the licensed software, or any systems you design using the licensed software (if any).
10.        INDEMNITY. You agree to fully defend and indemnify NXP from all claims, liabilities, and costs 
(including reasonable attorney's fees) related to (1) your use (including your subcontractor's 
or distributee's use, if permitted) of the Licensed Software or (2) your violation of the terms and 
conditions of this Agreement.
11.        LIMITATION OF LIABILITY.  EXCLUDING LIABILITY FOR A BREACH OF SECTION 2 (LICENSE GRANTS), 
SECTION 3 (LICENSE LIMITATIONS AND RESTRICTIONS), SECTION 16 (CONFIDENTIAL INFORMATION), OR 
CLAIMS UNDER SECTION 10 (INDEMNITY), IN NO EVENT WILL EITHER PARTY BE LIABLE, WHETHER IN 
CONTRACT, TORT, OR OTHERWISE, FOR ANY INCIDENTAL, SPECIAL, INDIRECT, CONSEQUENTIAL OR 
PUNITIVE DAMAGES, INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR ANY LOSS OF USE, LOSS OF 
TIME, INCONVENIENCE, COMMERCIAL LOSS, OR LOST PROFITS, SAVINGS, OR REVENUES, TO THE FULL 
EXTENT SUCH MAY BE DISCLAIMED BY LAW. NXP'S TOTAL LIABILITY FOR ALL COSTS, DAMAGES, CLAIMS, 
OR LOSSES WHATSOEVER ARISING OUT OF OR IN CONNECTION WITH THIS AGREEMENT OR PRODUCT(S) 
SUPPLIED UNDER THIS AGREEMENT IS LIMITED TO THE AGGREGATE AMOUNT PAID BY YOU TO NXP IN 
CONNECTION WITH THE LICENSED SOFTWARE PROVIDED UNDER THIS AGREEMENT TO WHICH LOSSES 
OR DAMAGES ARE CLAIMED.
12.        EXPORT COMPLIANCE. Each party shall comply with all applicable export and import control laws 
and regulations including but not limited to the US Export Administration Regulation (including 
restrictions on certain military end uses and military end users as specified in Section 15 C.F.R.  744.21 
and prohibited party lists issued by other federal governments), Catch-all regulations and all national 
and international embargoes. Each party further agrees that it will not knowingly transfer, divert, export 
or re-export, directly or indirectly, any product, software, including software source code, or technology 
restricted by such regulations or by other applicable national regulations, received from the other party 
under this Agreement, or any direct product of such software or technical data to any person, firm, 
entity, country or destination to which such transfer, diversion, export or re-export is restricted or 
prohibited, without obtaining prior written authorization from the applicable competent government 
authorities to the extent required by those laws.
13.   GOVERNMENT CONTRACT COMPLIANCE
13.1.      If you sell Authorized Systems directly to any government or public entity, including U.S., state, 
local, foreign or international governments or public entities, or indirectly via a prime contractor or 
subcontractor of such governments or entities, NXP makes no representations, certifications, or 
warranties whatsoever about compliance with government or public entity acquisition statutes or 
regulations, including, without limitation, statutes or regulations that may relate to pricing, quality, 
origin or content.
13.2.      The Licensed Software has been developed at private expense and is a "Commercial Item" as 
defined in 48 C.F.R. Section 2.101, consisting of "Commercial Computer Software", and/or "Commercial 
Computer Software Documentation," as such terms are used in 48 C.F.R. Section 12.212 (or 48 C.F.R. 
Section 227.7202, as applicable) and may only be licensed to or shared with U.S. Government end users 
in object code form as part of, or embedded within, Authorized Systems. Any agreement pursuant to 
which you share the Licensed Software will include a provision that reiterates the limitations of this 
document and requires all sub-agreements to similarly contain such limitations. 
14.        CRITICAL APPLICATIONS.  In some cases, NXP may promote certain software for use in the 
development of, or for incorporation into, products or services (a) used in applications requiring fail-safe 
performance or (b) in which failure could lead to death, personal injury, or severe physical or 
environmental damage (these products and services are referred to as "Critical Applications"). NXP's 
goal is to educate customers so that they can design their own end-product solutions to meet applicable 
functional safety standards and requirements. Licensee makes the ultimate design decisions regarding 
its products and is solely responsible for compliance with all legal, regulatory, safety, and security 
related requirements concerning its products, regardless of any information or support that may be 
provided by NXP. As such, Licensee assumes all risk related to use of the Licensed Software in Critical 
Applications and NXP SHALL NOT BE LIABLE FOR ANY SUCH USE IN CRITICAL APPLICATIONS BY LICENSEE. 
Accordingly, Licensee will indemnify and hold NXP harmless from any claims, liabilities, damages and 
associated costs and expenses (including attorneys' fees) that NXP may incur related to Licensees 
incorporation of the Licensed Software in a Critical Application.
15.        CHOICE OF LAW; VENUE.  This Agreement will be governed by, construed, and enforced in 
accordance with the laws of The Netherlands, without regard to conflicts of laws principles, will apply to 
all matters relating to this Agreement or the Licensed Software, and you agree that any litigation will be 
subject to the exclusive jurisdiction of the courts of Amsterdam, The Netherlands. The United Nations 
Convention on Contracts for the International Sale of Goods will not apply to this document. 
16.        CONFIDENTIAL INFORMATION.  Subject to the license grants and restrictions contained herein, 
you must treat the Licensed Software as confidential information and you agree to retain the Licensed 
Software in confidence perpetually. You may not disclose any part of the Licensed Software to anyone 
other than distributees in accordance with Section 2.3 and employees, or subcontractors in accordance 
with Section 2.5, who have a need to know of the Licensed Software and who have executed written 
agreements obligating them to protect such Licensed Software to at least the same degree of 
confidentiality as in this Agreement. You agree to use the same degree of care, but no less than a 
reasonable degree of care, with the Licensed Software as you do with your own confidential information. 
You may disclose Licensed Software to the extent required by a court or under operation of law or order 
provided that you notify NXP of such requirement prior to disclosure, which you only disclose the 
minimum of the required information, and that you allow NXP the opportunity to object to such court or 
other legal body requiring such disclosure.
17.       TRADEMARKS.  You are not authorized to use any NXP trademarks, brand names, or logos.
18.        ENTIRE AGREEMENT.  This Agreement constitutes the entire agreement between you and NXP 
regarding the subject matter of this Agreement, and supersedes all prior communications, negotiations, 
understandings, agreements or representations, either written or oral, if any. This Agreement may only 
be amended in written form, signed by you and NXP.
19.        SEVERABILITY.  If any provision of this Agreement is held for any reason to be invalid or 
unenforceable, then the remaining provisions of this Agreement will be unimpaired and, unless a 
modification or replacement of the invalid or unenforceable provision is further held to deprive you or 
NXP of a material benefit, in which case the Agreement will immediately terminate, the invalid or 
unenforceable provision will be replaced with a provision that is valid and enforceable and that comes 
closest to the intention underlying the invalid or unenforceable provision.
20.        NO WAIVER.  The waiver by NXP of any breach of any provision of this Agreement will not 
operate or be construed as a waiver of any other or a subsequent breach of the same or a different 
provision.
21.        AUDIT.  You will keep full, clear and accurate records with respect to your compliance with the 
limited license rights granted under this Agreement for three years following expiration or termination 
of this Agreement. NXP will have the right, either itself or through an independent certified public 
accountant to examine and audit, at NXP's expense, not more than once a year, and during normal 
business hours, all such records that may bear upon your compliance with the limited license rights 
granted above. You must make prompt adjustment to compensate for any errors and/or omissions 
disclosed by such examination or audit.
22.        NOTICES.             All notices and communications under this Agreement will be made in writing, 
and will be effective when received at the following addresses: 
                 NXP:          NXP B.V.
                                   High Tech Campus 60
                                   5656 AG Eindhoven
                                   The Netherlands
                              ATTN: Legal Department
                    
                         You:              The address provided at registration will be used.
 
23.        RELATIONSHIP OF THE PARTIES.     The parties are independent contractors. Nothing in this 
Agreement will be construed to create any partnership, joint venture, or similar relationship. Neither 
party is authorized to bind the other to any obligations with third parties.
24.        SUCCESSION AND ASSIGNMENT.   This Agreement will be binding upon and inure to the benefit 
of the parties and their permitted successors and assigns.  You may not assign this Agreement, or any 
part of this Agreement, without the prior written approval of NXP, which approval will not be 
unreasonably withheld or delayed. NXP may assign this Agreement, or any part of this Agreement, in its 
sole discretion.
25.       PRIVACY. By agreeing to this Agreement and/or utilizing the Licensed Software, Licensee consents 
to use of certain personal information, including but not limited to name, email address, and location, 
for the purpose of NXPs internal analysis regarding future software offerings.  NXPs complete Privacy 
Statement can be found at: https://www.nxp.com/company/our-company/about-nxp/privacy-
statement:PRIVACYPRACTICES.
 
 
 
 
 
 
APPENDIX A
Other License Grants and Restrictions:
 
The Licensed Software may include some or all of the following software, which is either 1) Third Party 
Software or 2) NXP proprietary software subject to different terms than those in the Agreement. If the 
Software Content Register that accompanies the Licensed Software identifies any of the following 
Third Party Software or specific components of the NXP proprietary software, the following terms 
apply to the extent they deviate from the terms in the Agreement:
 
Airbiquity Inc.: The Airbiquity software may only be used in object code and Licensee may not sublicense 
the Airbiquity software to any third party. Licensees license to use the Airbiquity software expires on 
June 30, 2023.
 
Amazon: Use of the Amazon software constitutes your acceptance of the terms of the Amazon Program 
Materials License Agreement (including the AVS Component Schedule, if applicable), located 
at https://developer.amazon.com/support/legal/pml.  All Amazon software is hereby designated 
"Amazon confidential".  With the exception of the binary library of the Amazon Wake Word Engine for 
Alexa, all Amazon software is also hereby designated as Restricted Program Materials. Amazon is a 
third-party beneficiary to this Agreement with respect to the Amazon software.
 
Amazon Web Services, Inc.: AWS is an intended third-party beneficiary to this Agreement with respect 
to the Greengrass software. If you have an account with AWS that is not in good standing, you may not 
download, install, use or distribute the Greengrass software. You will comply with all instructions and 
requirements in any integration documents, guidelines, or other documentation AWS provides. The 
license to the Greengrass software will immediately terminate without notice if you (a) fail to comply 
with this Agreement or any other agreement with AWS, (b) fail to make timely payment for any AWS 
service, (c) fail to implement AWS updates, or (d) bring any action for intellectual property infringement 
against AWS or any AWS customer utilizing AWS services.  Any dispute or claim relating to your use of 
the Greengrass software will be resolved by binding arbitration, rather than in court, except that you 
may assert claims in small claims court if your claims qualify.
 
Amphion Semiconductor Ltd.: Distribution of Amphion software must be a part of, or embedded within, 
Authorized Systems that include an Amphion Video Decoder. 
 
Apple MFi Software Development Kit: Use of Apple MFi Software and associated documentation is 
restricted to current Apple MFi licensees in accordance with the terms of their own valid and in-effect 
license from Apple.
 
Aquantia Corp.: You may use Aquantia's API binaries solely to flash the API software to an NXP Product 
which mates with an Aquantia device.
 
Argus Cyber Security: The Argus software may only be used in object code and only for evaluation and 
demonstration purposes.
 
Atheros: Use of Atheros software is limited to evaluation and demonstration only.  Permitted 
distributions must be similarly limited. Further rights must be obtained directly from Atheros.   
 
ATI (AMD): Distribution of ATI software must be a part of, or embedded within, Authorized Systems that 
include a ATI graphics processor core. 
 
Au-Zone Technologies: eIQ Portal, Model Tool, DeepViewRT and ModelRunner are distributed by NXP 
under license from Au-Zone Technologies.  Your use of the Licensed Software, examples and related 
documentation is subject to the following:
(1)          Use of Software is limited to Authorized System only
(2)          In no event may Licensee Sublicense the Software
(3)          AU-ZONE TECHNOLOGIES SHALL NOT BE LIABLE FOR USE OF LICENSED SOFTWARE IN CRITICAL 
APPLICATIONS BY LICENSEE
 
 
Broadcom Corporation: Your use of Broadcom Corporation software is restricted to Authorized Systems 
that incorporate a compatible integrated circuit device manufactured or sold by Broadcom.
 
Cadence Design Systems: Use of Cadence audio codec software is limited to distribution only of one 
copy per single NXP Product. The license granted herein to the Cadence Design Systems 
HiFi aacPlus Audio Decoder software does not include a license to the AAC family of technologies which 
you or your customer may need to obtain. Configuration tool outputs may only be distributed by 
licensees of the relevant Cadence SDK and distribution is limited to distribution of one copy embedded 
in a single NXP Product. Your use of Cadence NatureDSP Libraries whether in source code or in binary is 
restricted to NXP SoC based systems or emulation enablement based on NXP SoC.
 
 
Cirque Corporation: Use of Cirque Corporation technology is limited to evaluation, demonstration, or 
certification testing only. Permitted distributions must be similarly limited. Further rights, including but 
not limited to ANY commercial distribution rights, must be obtained directly from Cirque Corporation.
 
Coding Technologies (Dolby Labs): Use of CTS software is limited to evaluation and demonstration 
only.  Permitted distributions must be similarly limited. Further rights must be obtained from Dolby 
Laboratories.
 
CSR: Use of Cambridge Silicon Radio, Inc. ("CSR") software is limited to evaluation and demonstration 
only.  Permitted distributions must be similarly limited.  Further rights must be obtained directly from 
CSR.
 
Crank: Use of Crank Software Inc. software is limited to evaluation and demonstration only. Permitted 
distributions must be similarly limited. Further rights must be obtained directly from Crank Software Inc.
 
Cypress Semiconductor Corporation: WWD RTOS source code may only be used in accordance with the 
Cypress IOT Community License Agreement obtained directly from Cypress Semiconductor Corporation.
 
Elektrobit Automotive GmbH (EB): EB software must be used consistent with the EB License Terms and 
Conditions, Version 1.4 (Dec 2019) found here: https://www.elektrobit.com/legal-notice/ .  Licensee is 
only granted an evaluation license for the EB software, defined as license to use the EB software 
internally for own evaluation purposes, limited to three (3) months. Production deployment of the EB 
software using this license is prohibited. See additionally Section 2.1.1 EB EULA.
 
Embedded Systems Academy GmbH (EmSA):  Any use of Micro CANopen Plus is subject to the 
acceptance of the license conditions described in the LICENSE.INFO file distributed with all example 
projects and in the documentation and the additional clause described below.
Clause 1: Micro CANopen Plus may not be used for any competitive or comparative purpose, including 
the publication of any form of run time or compile time metric, without the express permission of EmSA.
 
Fenopix Technologies Private Limited: Under no circumstances may the CanvasJS software product be 
used in any way that would compete with any product from Fenopix.  License to the CanvasJS software 
will terminate immediately without notice if Licensee fail to comply with any provision of this 
Agreement.
 
Fraunhofer IIS: Fraunhofer MPEG Audio Decoder (Fraunhofer copyright) - If you are provided MPEG-H 
decoding functionality, you understand that NXP will provide Fraunhofer your name and contact 
information.
 
Future Technology Devices International Ltd.: Future Technology Devices International software must be 
used consistent with the terms found 
here: http://www.ftdichip.com/Drivers/FTDriverLicenceTerms.htm
 
Global Locate (Broadcom Corporation): Use of Global Locate, Inc. software is limited to evaluation and 
demonstration only.  Permitted distributions must be similarly limited.  Further rights must be obtained 
from Global Locate.   
 
Microsoft: Except for Microsoft PlayReady software, if the Licensed Software includes software owned 
by Microsoft Corporation ("Microsoft"), it is subject to the terms of your license with Microsoft (the 
"Microsoft Underlying Licensed Software") and as such, NXP grants no license to you, beyond evaluation 
and demonstration in connection with NXP processors, in the Microsoft Underlying Licensed 
Software.  You must separately obtain rights beyond evaluation and demonstration in connection with 
the Microsoft Underlying Licensed Software from Microsoft. Microsoft does not provide support 
services for the components provided to you through this Agreement.  If you have any questions or 
require technical assistance, please contact NXP.  Microsoft Corporation is a third party beneficiary to 
this Agreement with the right to enforce the terms of this Agreement.  TO THE MAXIMUM EXTENT 
PERMITTED BY LAW, MICROSOFT AND ITS AFFILIATES DISCLAIM ANY WARRANTIES FOR THE MICROSOFT 
UNDERLYING LICENSED SOFTWARE.  TO THE MAXIMUM EXTENT PERMITTED BY LAW, NEITHER 
MICROSOFT NOR ITS AFFILIATES WILL BE LIABLE, WHETHER IN CONTRACT, TORT, OR OTHERWISE, FOR 
ANY DIRECT, INCIDENTAL, SPECIAL, INDIRECT, CONSEQUENTIAL OR PUNITIVE DAMAGES, INCLUDING, 
BUT NOT LIMITED TO, DAMAGES FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL 
LOSS, OR LOST PROFITS, SAVINGS, OR REVENUES, ARISING FROM THE FROM THE USE OF THE 
MICROSOFT UNDERLYING LICENSED SOFTWARE.  With respect to the Microsoft PlayReady software, you 
will have the license rights granted in Section 2, provided that you may not use the Microsoft PlayReady 
software unless you have entered into a Microsoft PlayReady Master Agreement and license directly 
with Microsoft.
 
MindTree: Notwithstanding the terms contained in Section 2.3 (a), if the Licensed Software includes 
proprietary software of MindTree in source code format, Licensee may make modifications and create 
derivative works only to the extent necessary for debugging of the Licensed Software.
 
MM SOLUTIONS AD:  Use of MM SOLUTIONS AEC (Auto Exposure Control) and AWB (Auto White 
Balance) software is limited to demonstration, testing, and evaluation only.  In no event may Licensee 
distribute or sublicense the MM SOLUTIONS software. Further rights must be obtained directly from 
MM SOLUTIONS.
 
MPEG LA: Use of MPEG LA audio or video codec technology is limited to evaluation and demonstration 
only. Permitted distributions must be similarly limited. Further rights must be obtained directly from 
MPEG LA. 
 
MQX RTOS Code: MQX RTOS source code may not be re-distributed by any NXP Licensee under any 
circumstance, even by a signed written amendment to this Agreement.
 
NXP Wireless Charging Library: License to the Software is limited to use in inductive coupling or wireless 
charging applications
 
Opus: Use of Opus software must be consistent with the terms of the Opus license which can be found 
at: http://www.opus-codec.org/license/  
 
Oracle JRE (Java): The Oracle JRE must be used consistent with terms found 
here: http://java.com/license
 
P&E Micro: P&E Software must be used consistent with the terms found 
here: http://www.pemicro.com/licenses/gdbserver/license_gdb.pdf
 
Pro Design Electronic: Licensee may not modify, create derivative works based on, or copy the Pro 
Design software, documentation, hardware execution key or the accompanying materials.  Licensee 
shall not use Pro Design's or any of its licensors names, logos or trademarks to market the Authorized 
System.  Only NXP customers and distributors are permitted to further redistribute the Pro Design 
software and only as part of an Authorized System which contains the Pro Design software.
 
Qualcomm Atheros, Inc.: Notwithstanding anything in this Agreement, Qualcomm Atheros, Inc. Wi-Fi 
software must be used strictly in accordance with the Qualcomm Atheros, Inc. Technology License 
Agreement that accompanies such software.  Any other use is expressly prohibited.
 
Real Networks - GStreamer Optimized Real Format Client Code implementation or OpenMax Optimized 
Real Format Client Code: Use of the GStreamer Optimized Real Format Client Code, 
or OpenMax Optimized Real Format Client code is restricted to applications in the automotive 
market.  Licensee must be a final manufacturer in good standing with a current license with Real 
Networks for the commercial use and distribution of products containing the GStreamer Optimized Real 
Format Client Code implementation or OpenMax Optimized Real Format Client Code
 
RivieraWaves SAS (a member of the CEVA, Inc. family of companies): You may not use 
the RivieraWaves intellectual property licensed under this Agreement if you develop, market, and/or 
license products similar to such RivieraWaves intellectual property.  Such use constitutes a breach of this 
Agreement.  Any such use rights must be obtained directly from RivieraWaves.
 
SanDisk Corporation: If the Licensed Software includes software developed by SanDisk Corporation 
("SanDisk"), you must separately obtain the rights to reproduce and distribute this software in source 
code form from SanDisk.  Please follow these easy steps to obtain the license and software: 
(1) Contact your local SanDisk sales representative to obtain the SanDisk License Agreement. 
(2) Sign the license agreement.  Fax the signed agreement to SanDisk USA marketing department at 408-
542-0403.  The license will be valid when fully executed by SanDisk.
(3) If you have specific questions, please send an email to sales@sandisk.com
You may only use the SanDisk Corporation Licensed Software on products compatible with a SanDisk 
Secure Digital Card.  You may not use the SanDisk Corporation Licensed Software on any memory device 
product.  SanDisk retains all rights to any modifications or derivative works to the SanDisk Corporation 
Licensed Software that you may create.
 
SEGGER Microcontroller - emWin Software: Your use of SEGGER emWin software and components is 
restricted for development of NXP ARM7, ARM9, Cortex-M0, Cortex-M3, Cortex-M4, Cortex-M33, 
Cortex-M7, and Cortex-A7 based products only.
 
SEGGER Microcontroller - J-Link/J-Trace Software: Segger software must be used consistent with the 
terms found here: http://www.segger.com/jlink-software.html
 
Synopsys/Target Compiler Technologies: Your use of the Synopsys/Target Compiler Technologies 
Licensed Software and related documentation is subject to the following:
(1) Duration of the license for the Licensed Software is limited to 12 months, unless otherwise specified 
in the license file.
(2) The Licensed Software is usable by one user at a time on a single designated computer, unless 
otherwise agreed by Synopsys. 
(3) Licensed Software and documentation are to be used only on a designated computer at the 
designated physical address provided by you on the APEX license form.
(4) The Licensed Software is not sub-licensable.
 
T2 Labs / T2 Software:  As a condition to the grant of any license under this Agreement, you represent 
and warrant that you will comply with all licenses, agreements, rules and bylaws of the Bluetooth SIG 
(Special Interest Group ) applicable to the licensed software and documentation and its use which may 
affect when and if you may take certain actions under licenses granted hereunder.
 
The license grant under this Agreement is conditional to you being (i) a Bluetooth SIG Associate member 
until such time as the specifications for the software are made public to Bluetooth SIG members of any 
level and (ii) thereafter a Bluetooth SIG member of any level.
 
Notwithstanding the terms contained in Section 2.3 (a), if the licensed software includes proprietary 
software in source code format, you may make modifications and create derivative works only to the 
extent necessary for improving the performance of the source code with the NXP products or your 
products and for creating enhancements of such products. You may not further sublicense or otherwise 
distribute the source code, or any modifications or derivatives thereof as stand-alone products.  You will 
be responsible for qualifying any modifications or derivatives with the Bluetooth SIG and any other 
qualifying bodies.
TARA Systems: Use of TARA Systems GUI technology Embedded Wizard is limited to evaluation and 
demonstration only. Permitted distributions must be similarly limited. Further rights must be obtained 
directly from TARA Systems.
 
Texas Instruments: Your use of Texas Instruments Inc. WiLink8 Licensed Software is restricted to NXP 
SoC based systems that include a compatible connectivity device manufactured by TI. 
 
TES Electronic Solutions Germany (TES):  TES 3D Surround View software and associated data and 
documentation may only be used for evaluation purposes and for demonstration to third parties in 
integrated form on a board package containing an NXP S32V234 device. Licensee may not distribute or 
sublicense the TES software. Your license to the TES software may be terminated at any time upon 
notice.
 
 
Vivante: Distribution of Vivante software must be a part of, or embedded within, Authorized Systems 
that include a Vivante Graphics Processing Unit. 

