Tracer Tool for PT2000 and MC33816

KITPSCDEBUGEVM

画像にカーソルを合わせると拡大表示されます。

製品詳細

セクションを選択:

対応製品

パワーマネージメント

パワートレイン&エンジン制御

Features

KITPSCDEBUGEVM Features:

  • USB connector use to communicate between the PT2000/MC33816 IDE and tracer
  • Coaxial connector to be connected to the DBG pin and GND.
  • Green LED LED is ON when calibration sequence is received, therefore the tracer
  • board is ready to receive the trace code sequence
  • Yellow LED LED is ON when tracer RAM is full
  • Red LED LED is ON when tracer is waiting for calibration pulses

PT2000 / MC33816 Features:

  • Battery voltage range, 5.5 < VBATT < 72 V
  • Predrive operating voltage up to 72 V
  • High side/low side predrive PWM capability up to 100 kHz
  • All predrivers have four selectable slew rates
  • Twelve selectable, predefined VDS/VSRC monitoring thresholds
  • Encryption for microcode protection
  • Integrated 1.0 MHz back-up clock

購入オプション

KITPSCDEBUGEVM-Image

クリックして展開

  • KITPSCDEBUGEVM

  • Tracer Debug Module for MC33816 and PT2000.

  • JP¥35,146
  • の数量に対して 1
    • 在庫状況: 在庫あり
    • 在庫: 3
    • 配送: 通常 1~2営業日以内に配送
NXPから購入する代理店から購入する

ドキュメンテーション

クイック・リファレンス ドキュメンテーションの種類.

1-5 の 6 ドキュメント

全て表示

設計・リソース

セクションを選択:

ソフトウェア

1 ソフトウェア・ファイル

注: より快適にご利用いただくために、ソフトウェアのダウンロードはデスクトップで行うことを推奨します。

サポート

お困りのことは何ですか??