DEMO9S08QG8: MC9S08QG8 Demo Board

Overview

The DEMO9S08QG8 is a cost-effective demonstration board for the NXP^® MC9S08QG8 MCU.

Developing application code is quick and easy with the integrated USB-to-BDM interface, CodeWarrior^® Development Studio and software examples.
A 32-pin connector allows you to connect the DEMO9S08QG8 board to an expanded evaluation environment.

Features

MC9S08QG8 CPU, 16-pin DIP, socketed
- 8 KB Flash
- 512 B RAM
- Internal 32 KHz oscillator, trimmable to ±0.2%
- 12 GPIO, one Input Only, one Output only
- Timer interface module
- SCI and SPI communication ports
- IIC module
- 8 KBI inputs
- 2-Ch, 16-bit, timer interface
- 8-Ch, 10-bit analog to digital converter (ADC)
- Analog comparator w/ internal compare
USB-to-BDM interface
RS-232 serial port w/ DB9 connector
SPI, IIC ports available on connector J1
External 32.768 kHz clock oscillator option
Power input selection jumper
- Power input from USB-BDM
- Power input from on-board regulator
- Power input from connector J1
- Power output through connector J1
User components provided
- Three push switches; two User, one Reset
- Three LED indicators; two User, one VDD
Jumpers
- USER_EN
- PWR_SEL
- COM_SEL
- VX_EN
Connectors
- 32-pin MCU I/O connector
- 2.0mm barrel connector
- DB9 serial connector
Specifications:
- Board size 2.9 x 2.5
Power Input:
- USB cable - 500mA max
- PWR connector - 9VDC typical, +7VDC to +18VDC

Features

MC9S08QG8 CPU, 16-pin DIP, socketed
- 8 KB Flash
- 512 B RAM
- Internal 32 KHz oscillator, trimmable to ±0.2%
- 12 GPIO, one Input Only, one Output only
- Timer interface module
- SCI and SPI communication ports
- IIC module
- 8 KBI inputs
- 2-Ch, 16-bit, timer interface
- 8-Ch, 10-bit analog to digital converter (ADC)
- Analog comparator w/ internal compare
USB-to-BDM interface
RS-232 serial port w/ DB9 connector
SPI, IIC ports available on connector J1
External 32.768 kHz clock oscillator option
Power input selection jumper
- Power input from USB-BDM
- Power input from on-board regulator
- Power input from connector J1
- Power output through connector J1
User components provided
- Three push switches; two User, one Reset
- Three LED indicators; two User, one VDD
Jumpers
- USER_EN
- PWR_SEL
- COM_SEL
- VX_EN
Connectors
- 32-pin MCU I/O connector
- 2.0mm barrel connector
- DB9 serial connector
Specifications:
- Board size 2.9 x 2.5
Power Input:
- USB cable - 500mA max
- PWR connector - 9VDC typical, +7VDC to +18VDC

Kit Contains

Installation Guide
Demonstration Board
CodeWarrior Software
Adapter cable
Resource CD–ROM

Supported Devices

S08QG: 8-bit Small Package QG MCUs