Products Applications Design Support Company
  • Language 
  • Orders
  • Sign In
  • RFID / NFC
    • NFC (HF)
    • MIFARE (HF)
    • UCODE RAIN RFID (UHF)
    • HITAG (LF)
  • NFC (HF)
    • Connected NFC Tags
    • NTAG for Tags & Labels
    • NTAG SmartSensor
    • NFC Readers
    • ICODE
    • NFC Charging
  • Connected NFC Tags
    • NTAG213F/NTAG216F
    • NTAG 5 boost
    • NTAG 5 link
    • NTAG 5 switch
    • NTAG I2C
    • Flex Antennas Set for NTAG I2C plus
    • NTAG I2C plus Explorer Kit w/ NFC Reader
    • NTAG I2C plus kit for Arduino® pinout
    • NTAG I2C plus Explorer Kit
  • NFC - NTAG® 5 SPOTLIGHTS

NFC - NTAG® 5 SPOTLIGHTS

    • Facebook
    • Twitter
    • LinkedIn
    • Printer

About This Training

The NTAG 5 product family consists of the NTAG 5 switch, NTAG 5 link, and NTAG 5 boost. These NFC connected tags offer configuration via PWM over NFC, I2C Controller interface, direct access to sensors without a need of MCU, and the possibility of a tiny antenna for small devices.

In this series of short webinars, you will get to know the features and use cases of the NTAG 5 product family.

What You Will Learn

    NFC NTAG 5 product family features and use cases.

Presenters

  • Erich Reisenhofer

Language

  • English

Presentation

Get the full session presentation 

Resources

  • NTAG 5 switch
  • NTAG 5 link
  • NTAG 5 boost
  • NTAG I2C plus
  • NFC
  • NFC Tags for Electronics

Training Outline

NFC NTAG 5 Spotlight Pre-reading

  1. NTAG 5 offers shared resources, which are accessible via NFC and I2C interface
  2. NTAG 5 Offers different arbitration schemes to ensure data integrity
  3. Shared resources are:
    • Non-Volatile EEPROM
    • Volatile SRAM
    • Session registers
  4. NTAG 5 offers different options to protect EEPROM, SRAM and registers
  5. Total power budget is essential for new designs. NTAG 5 offers energy harvesting, standby and hard power-down mode to reduce power consumption to its minimum

NTAG 5 Features: Regulated energy harvesting

  1. Description
  2. Block diagram
  3. Technical details
  4. Energy harvesting performance measurements
  5. How to enable energy harvesting
  6. Use cases
  7. Support material
  8. Source of truth
  9. Q&A

NTAG 5 Features: I2C Controller functionality

  1. Description
  2. Bill of Material
  3. Technical details
  4. How to configure I2C status
  5. Custom commands
  6. Use cases
  7. Support material
  8. Source of truth
  9. Q&A

NTAG 5 Features: GPIO, PWM and Event Detection

  1. Bill of material
  2. Configuring of GPIO and PWM
  3. Configuring PWM duty cycle
  4. Use cases

NTAG 5 Features: NTAG 5 boost

  1. Passive vs. active modulation
  2. Antenna sizes
  3. Matching technology
  4. Configuring ALM
  5. Target LMA curve
  6. Use cases
  7. Antenna Design Guide
  8. NTAG 5 I2C cockpit

NTAG 5 Features: Scalable Security– AES Mutual Authentication

  1. Technical details
    • Re-programmable originality signature
    • Read-only locking
    • EEPROM access restrictions
  2. Use cases

NTAG 5 Use Cases: Bringing life to your sensors without µC and battery with NTAG 5 link

  1. NFC Connected Tags portfolio
  2. NTAG 5 link features
  3. Use case definition
  4. NTAG 5 link value proposition
  5. Overview of ndustrial sensor market
  6. Target applications

NTAG 5 Use Cases: Secrets to design innovations with NTAG 5 boost

  1. NFC connected tags portfolio
  2. NTAG 5 boost features
  3. NTAG 5 boost value proposition
  4. Target application

NTAG 5 Use Case: NFC as a maintenance interface

  1. NXP connected tags portfolio
  2. Definition of a maintenance interface
  3. NFC compared to wired interfaces
  4. Using an NFC smartphone compared to dedicated readers
  5. Specific developer tasks

Have a Question? Ask the Community

Ask NFC community

MoreLess

  • About NXP
  • Careers
  • Investors
  • Media
  • Contact
  • Subscribe
  • Privacy
  • Terms of Use
  • Terms of Sale
  • Slavery and Human Trafficking Statement
  • Accessibility

©2006-2020 NXP Semiconductors. All rights reserved.