Flash-Based Low-Power DisplayPort to VGA Adapter
PTN3356 Receive alerts
PTN3356 is a flash-based DisplayPort to VGA adapter optimized primarily for motherboard applications, to convert a DisplayPort signal from the chip set to an analog video signal that directly connects to the VGA connector. PTN3356 integrates a DisplayPort receiver, a high-speed triple video digital-to-analog converter that supports a wide range of display resolutions, for example, VGA to WUXGA.
PTN3356 supports two DisplayPort lanes operating at either 2.7 Gbit/s or 1.62 Gbit/s per lane.
PTN3356 supports I²C-bus over AUX per DisplayPort standard, and bridges the VESA DDC channel to the DisplayPort Interface.
PTN3356 is powered from a 3.3 V power supply and consumes approximately 200 mW of power for video streaming in WUXGA resolution and 410 μW of power in Low-power mode. The VGA output is powered down when there is no valid DisplayPort source data being transmitted. PTN3356 also aids in monitor detection by performing load sensing on RGB lines and reporting sink connection status to the source.
Outline 3d SOT617-3
Product Details
Features
Key Features
- VESA-compliant DisplayPort V1.4 converter
Part numbers include: PTN3356BS, PTN3356R1BS.
Documentation
Quick reference to our documentation types.
1-5 of 6 documents
-
Application Note
AN11590: PTN3356 PCB Layout Guideline, Reference Schematics andBOM
Design Resources
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
2 engineering services
-
Independent Design House (IDH)
Hardware Design Services
-
Independent Design House (IDH)
Embedded Software Design
To find a complete list of our partners that support this product, please see our Partner Marketplace.