TJA1102-TJA1102S: IEEE 100BASE-T1 compliant Ethernet PHY Transceivers
Overview
Features
Features
Automotive Qualified
- AEC-Q100 Grade 1
- Ambient Temperature -40°C to 125°C
IEEE 100BASE-T1 compliant PHY transceiver
- Interoperable with any IEEE 100BASE-T1 and OABR compliant PHY
- 100Mbps Ethernet over single unshielded twisted pair (UTP) cable
- Pin to pin compatible single and dual port version
OPEN Alliance TC-10 compliant sleep / wake up
- Fully integrated in the PHY - independent of host controller
- Wake over data line - saving additional wake up wire
- For reduced cable cost and weight
Optimized for Automotive Usecases
- MDI pins do not need external filter or ESD protection
- Cable polarity detection and correction
- Supports single 3.3V supply
- Direct connection to Vbat
Advanced Diagnostic Features
- Real-time Signal Quality Indicator
- Gap Free Under Voltage Detection
- Diagnosis of Cabling Errors
For more features, please read the TJA1102 Short Data Sheet. For the Full Data Sheet and application hints, please register with DocStore at https://www.docstore.nxp.com (NDA required).
Development Boards and Designs
NXP GoldBox for Vehicle Networking
OM14500-TJA1102:Evaluation Board, TJA1102HN 100BASE-T1 Automotive Ethernet PHY
SJA1105SMBEVM:Gateway Prototyping Platform
S32G Reference Design for Vehicle Network ProcessingDevelopment Boards and Designs
NXP GoldBox for Vehicle NetworkingOM14500-TJA1102:Evaluation Board, TJA1102HN 100BASE-T1 Automotive Ethernet PHYSJA1105SMBEVM:Gateway Prototyping PlatformS32G Reference Design for Vehicle Network Processing
SJA1105Q-EVB:Ethernet Switch & PHY Evaluation Board.
MPC-LS-VNP-EVB:MPC-LS Evaluation Board for Vehicle Network Processing
MPC5748G Secure Ethernet Gateway Reference Design
MPC-LS Vehicle Network Processing Reference Design
S32V234EVB:S32V Vision and Sensor Fusion Evaluation System.
