NTS0101: Dual supply translating transceiver; open drain; auto direction sensing

Overview

The NTS0101 is a 1-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 1-bit input-output ports (A and B), one output enable input (OE) and two supply pins (V_CC(A) and V_CC(B)). V_CC(A) can be supplied at any voltage between 1.65 V and 3.6 V. V_CC(B) can be supplied at any voltage between 2.3 V and 5.5 V. This flexibility makes the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins A and OE are referenced to V_CC(A) and pin B is referenced to V_CC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using I_OFF. The I_OFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

MoreLess

Features

Wide supply voltage range:
- V_CC(A): 1.65 V to 3.6 V and V_CC(B): 2.3 V to 5.5 V
Maximum data rates:
- Push-pull: 50 Mbps
I_OFF circuitry provides partial Power-down mode operation
Inputs accept voltages up to 5.5 V
ESD protection:
- HBM JESD22-A114E Class 2 exceeds 2500 V for A port
- HBM JESD22-A114E Class 3B exceeds 8000 V for B port
- MM JESD22-A115-A exceeds 200 V
- CDM JESD22-C101E exceeds 1500 V
Latch-up performance exceeds 100 mA per JESD 78B Class II
Multiple package options
Specified from -40 °C to +85 °C and -40 °C to +125 °C

Target Applications

I²C/SMBus
UART
GPIO

MoreLess

Features

Wide supply voltage range:
- V_CC(A): 1.65 V to 3.6 V and V_CC(B): 2.3 V to 5.5 V
Maximum data rates:
- Push-pull: 50 Mbps
I_OFF circuitry provides partial Power-down mode operation
Inputs accept voltages up to 5.5 V
ESD protection:
- HBM JESD22-A114E Class 2 exceeds 2500 V for A port
- HBM JESD22-A114E Class 3B exceeds 8000 V for B port
- MM JESD22-A115-A exceeds 200 V
- CDM JESD22-C101E exceeds 1500 V
Latch-up performance exceeds 100 mA per JESD 78B Class II
Multiple package options
Specified from -40 °C to +85 °C and -40 °C to +125 °C

Target Applications

I²C/SMBus
UART
GPIO

NTS0101 Block Diagram

NTS0101 Block Diagram

NTS0101 Block Diagram

Previous Next