Demo Board for 9S12P128
The DEMOAX9S12P128 supports application development and debug of the MC9S12P128, MCU on a single, low-cost board.
Buy OptionsAudio
Interfaces
Peripherals and Logic
Power Management
Sensors
RF
RFID/NFC
Security and Authentication
Wireless Connectivity
Browse all products
Product Information
Application-Specific Products
NXP Community
Design ideas, demo videos, quality answers. Connect with NXP professionals and other knowledgeable designers ready to help.
Design Resources
Software, documentation, evaluation tools. The resources to build comprehensive solutions and accelerate your time to market.
Access our design resource library
Careers at NXP
We're always looking for passionate and talented people to work with us.
Join our teamS12P: S12P Automotive and Industrial Microcontrollers (MCUs)
Recommended Tools and Software
Recommended Tools and Software
eGUI: Graphical LCD Driver for MCUs/MPUs
The NXP eGUI allows single chip MCU systems to create a graphical user interface and drive the new generation of colour graphics LCD panels with integrated display RAM and simple SPI or parallel bus interface.
Protocol Stacks
Universal Multilink Development Interface
P and E’s USB Multilink Universal combines support in a single interface for many NXP architectures.
Emulators, Probes, and Programmers
Embedded Software (8)
BSP, Drivers and Middleware (4)
LIN2.x and SAE J2602 Stack
- 2020-01-30 00:00:00
- FLEXERA
- 1 KB
- FSL_LIN_2.X_DRIVER
EEPROM Emulation Driver for Flash in S12XS, S12P, S12HY and S12XHY
- 2015-03-06 00:00:00
- EXE
- 5.0 MB
- HCS12XS_P_HY_XHY_EEE
Standard Software Driver (SSD) for Flash in S12XS, S12P, S12HY and S12XHY
- 2014-09-22 00:00:00
- EXE
- 7.8 MB
- HCS12XS_P_HY_XHY_FLASH_SSD_DEVD
MSCAN driver for S12(X) devices
- 2014-03-24 00:00:00
- ZIP
- 15.5 MB
- MSCAN_S12_DEVD
Code Snippets (3)
The SW demonstrates COP as a SW reset generator and MCU start after COP reset
Software offered 'As is', support provided on NXP® Communities only – The SW demonstrates COP as a SW reset generator and MCU start after COP reset.
- 2014-03-21 00:00:00
- ZIP
- 224.4 kB
- P128-COP-SWRESET-CW50
Software sets the bus clock 2MHz in PBE mode
Software offered 'As is', support provided on NXP® Communities only – Software sets the bus clock 2MHz in PBE mode
- 2014-03-21 00:00:00
- ZIP
- 278.8 kB
- P128-PLL-2MHZ_PBE_MODE-CW50
Software sets the bus clock 16MHz in PEE mod
Software offered 'As is', support provided on NXP® Communities only – Software sets the bus clock 16MHz in PEE mode
- 2014-03-21 00:00:00
- ZIP
- 249.1 kB
- P128-PLL-16MHZ_PEE_MODE-CW50
Protocol Stacks (1)
eGUI: Graphical LCD Driver for MCUs/MPUs
The NXP eGUI allows single chip MCU systems to create a graphical user interface and drive the new generation of colour graphics LCD panels with integrated display RAM and simple SPI or parallel bus interface.
Protocol Stacks
Development Software (4)
IDE and Build Tools (1)
CodeWarrior® Development Studio for HCS12(X) Microcontrollers (Classic IDE) v5.2
CodeWarrior Development Studio for NXP HCS12(X) v5.2 Microcontrollers enables engineers to build and deploy HCS12 or HCS12X/XGATE systems quickly and easily. This tool suite provides the capabilities required by every engineer in the development cycle: from board bring-up to firmware development to final application development. With a common project-based development environment reuse becomes a natural by-product as each team builds on the work already completed by the previous team.
IDE and Build Tools
Test, Debug and Analyzer Software (2)
DB12v4FW
The zip file contains S-Records and documentation for D-Bug12. This version runs on all MC9S12Dx512, MC9S12Dx256, MC9S12Dx128, MC9S12A256, MC9S12A128, MC9S12H256 and the BDM Programmer. This firmware supports programming all Flash HC12 and HCS12 devices.
- 2011-09-28 00:00:00
- ZIP
- 698.9 kB
- DB12V4FW
Components and Modules (1)
Embedded Component: NXP®.AN
Components and Modules
Development Hardware (6)
Emulators, Probes, and Programmers (4)
Universal Multilink Development Interface
P and E’s USB Multilink Universal combines support in a single interface for many NXP architectures.
Emulators, Probes, and Programmers
NXP Lead-Free BDM Flash Programmer for S08 and (S)12(X) MCUs
This NXP device programming solution allows in-circuit programming and debugging of all MC68HC90S08, MC68HC912 and MC9S12 family MCUs.
Emulators, Probes, and Programmers
Cyclone-FX: In-Circuit, Stand-Alone Production Programmers
Supports many NXP processor families and offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
Emulators, Probes, and Programmers
Universal Multilink FX High-Speed Development Interface
P and E’s USB Multilink Universal FX is a high-speed, all-in-one development interface which allows PC access to the Background Debug Mode or JTAG interface.
Emulators, Probes, and Programmers
Adapters, Cables, Sockets (1)
MC9S12P Adapters
MC9S12P lead-free SMPBs function as a low-cost development tool, a target for programming a device, or a daughter card for Softec MC9S12XD/MC9S12XE EVBs.
Adapters, Cables, Sockets
Evaluation and Development Boards (1)
Demo Board for 9S12P128
The DEMOAX9S12P128 supports application development and debug of the MC9S12P128, MCU on a single, low-cost board.
Evaluation and Development Boards
Designs (1)
MC33812 and S12P Small Engine Control
A single cylinder engine control unit (ECU) using the S12P as the main MCU and the MC33812 multifunctional Ignition and Injector Driver.
Designs
Embedded Software ( 6 )
BSP, Drivers and Middleware ( 4 )
.jpg)
emFile (File System)
emFile is an embedded file system which can be used with any type of storage device. A Microsoft Windows compatible FAT12/16/32 format, and a proprietary SEGGER EFS format are available. Support for NAND, NOR, SD, SDHC, MMC, eMMC, IDE, CompactFlash.
Micro CANopen Plus
Compliant and mature CANopen and CANopen FD slave and manager stack with a range of module add-ons. Designed to run in any environment: bare-metal, RTOS or consumer OS.
emWin (GUI/Graphics Package)
emWin the most efficient and comprehensive GUIs available. It is written in ANSI C and supports any display controller, display and CPU. emWin includes the AppWizard GUI design tool and a Simulation Environment to help speed your development.
Operating Systems ( 2 )
embOS (RTOS)
embOS is an ANSI-C RTOS which has been used within products throughout the embedded industry for more than twenty years. During this time the SEGGER team has improved and optimized embOS to continuously meet the demands of modern NXP hardware.
Development Software ( 1 )
IDE and Build Tools ( 1 )
IAR Embedded Workbench for HCS12
IAR Embedded Workbench for HCS12 is an integrated development environment with project management tools and editor. It includes a highly optimizing C/C++ compiler and the comprehensive C-SPY Debugger with simulator and hardware debugging support.
Development Hardware ( 7 )
Evaluation and Development Boards ( 2 )
OSBDM_OSJTAG_RESOURCES
OSBDM/OSJTAG resource page, including links for OSBDM/OSJTAG virtual toolkit, firmware updates, driver downloads, design documents, and related information.
OSBDM_OSJTAG_TOOLKIT
A set of Windows-based applications that function with the OSJTAG on NXP's tower board. Includes accelerometer, firmware updater, serial re-director, serial grapher, and terminal application.
Test Accessories and Debugger ( 5 )
CYCLONE FX
Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.
USB Multilink Universal FX
Multilink Universal FX is a high-speed,BDM/JTAG debug probe for Kinetis, LPC, S32, Qorivva MPC5xxx, MPC5xx/8xx, ColdFire, HC(S)12(X), S12Z, HCS08, RS08, DSC, 683xx, & HC16 devices. Supports SWO debug tools in NXP's MCUXpresso IDE.
CYCLONE LC
Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.
USB Multilink Universal
The USB Multilink Universal is an all-in-one BDM/JTAG debug probe for NXP Kinetis, LPC, i.MX, S32, HCS08, HC(S)12(X), S12Z, RS08, ColdFire V1/+V1, ColdFire V2-4*, Qorivva MPC5xxx, & DSC microcontrollers. Supports SWO debug tools in NXP's MCUXpresso.
