8-bit Flexis® AC128/96/60/48/32 MCUs

S08AC

The AC family, comprised of pin-compatible 8-bit and 32-bit device duos, is the third family in the Flexis® series. The Flexis series of controllers is the connection point on Our Controller Continuum, where 8- and 32-bit compatibility becomes reality.

The S08AC128/96/60/48/32 pushes the boundaries of the 8-bit architecture performance with 128 KB of flash, three timer/pulse-width modulators (PWM), 16-channel, 10-bit analog-to-digital converter (ADC) and up to 20 MHz in bus frequency. The 8-bit S08AC128/96/60/48/32 are pin-, peripheral- and tool-compatible with the 32-bit MCF51AC256/128 devices. They share a common set of peripherals and development tools to deliver the ultimate in migration flexibility.

Product Details

Select a section:

Block Diagram

Freescale S08AC Microcontroller Block Diagram

Freescale S08AC Microcontroller Block Diagram
Get diagram PDF

Features

Internal Clock Generator

  • Programmable frequency-locked loop(FLL) generates 8 MHz to 40 MHz
  • Provides multiple options for internal and external clock source and in-application clock switching
  • Trimmable with temperature and voltage compensation

10-bit Analog-to-Digital Converter

  • 10-bit Analog-to-Digital Converter
  • 2.5µs, 10-bit single conversion time

Timer with Ten Programmable Channels

  • Two 2-channes 16-bit timer systems
  • One 6-channel 16-bit timer systems
  • Programmable for input, capture, output compare or buffered pulse-width modulator (PWM)
    • PWM can be edge or center aligned

Extensive Serial Communications

  • Dual asynchronous SCIs
    • Flexible 13-bit module-based baud rate generators
    • LIN compatible
  • Inter-integrated circuit (I2C)
    • Up to 100 Kbps
    • Supports broadcasting mode and 10-bit addressing
  • Synchronous SPI
    • Multi-leader operation

System Protection

  • Selectable low-voltage detect/reset
  • COP watchdog timer
    • Option to run COP off independent clock source or bus
  • Cyclic redundancy check (CRC)

Input/Output

  • Up to 56 GPIO pins
    • Programmable pull-ups
    • High-current drivers
    • Controlled rise/fall times minimize noise

On-Chip Debug Interface

  • Single-wire background debug mode
  • Non-intrusive emulation
  • On-chip in-circuit emulator (ICE) debug module containing two comparators and nine trigger modes
  • View and change internal registers and memory while running an application

Documentation

Quick reference to our documentation types.

Filters

1-5 of 79 documents

Show All

Design Resources

Select a section:

Design Files

Filters

1 design file

  • Calculators

    S08 Battery Calculator

    ZIPRev 0May 29, 2003 00:00:00555.3 KBS08BATTCALC
    Download

Hardware

Filters

1-5 of 8 hardware offerings

Show All

Software

Filters

1-5 of 10 software files

Show All

Note: For better experience, software downloads are recommended on desktop.

Engineering Services

4 engineering services

To find a complete list of our partners that support this product, please see our Partner Marketplace.

Support

What do you need help with?

Search