Software offered 'As is', support provided on NXP® Communities only – The example code gives a starting point to develop Power and Motor control application on MC56F8006. The critical peripheral structure, with ADC module being used in ping-pong mode triggered by a delay block (PDB), that is in turn triggered by PWM sync signal is created, configuration used in almost all motor control application as the ADC sampling window is very critical in such applications. The code has been tested on CW10.4
NXP has developed safety features, including an IEC60730 Safety Library, to help manufacturers of automatic controls in the large appliance and industrial control market meet the IEC 60730 class B regulation
Software offered 'As is', support provided on NXP® Communities only – Contains four libraries. General Function Library (GFLIB) comprising basic trigonometric functions as well as general mathematical functions. General Digital Filters Library (GDFLIB) comprising digital IIR and FIR filters. Motor Control Library (MCLIB) comprising standard algorithms used for motor control. Advanced Control Library (ACLIB) comprising complex motor control algorithms used in advanced motor control.
CodeWarrior Development Studio for 56800/E Digital Signal Controllers v8.3 allows both 56800 and 56800/E developers build and deploy sophisticated systems quickly and easily by integrating support for both architectures into a single product. This product also includes Processor Expert (rapid application development tool) support for all released processors and supports 56F80x/2x, 56F85x, 56F81xx, 56F83xx, 56F801x/2x/3x, 56F800x and 56F824x/5x Digital Signal Controllers.
Our CodeWarrior for MCU's v11 integrates the development tools for the ColdFire. ColdFire+, DSC, Kinetis. Qorivva, RS08, S08 and S12Z architectures into a single product based on the Eclipse open development platform. Eclipse offers an excellent framework for building software development environments and is a standard framework used by many embedded software vendors.
The DSP56800E Quick Start is a software environment for the embedded applications development, based on the Graphical Configuration Tool and a unified Application Programming Interface (API)-style of accessing the peripheral modules.
The Component Development Environment (CDE) provides you with the tools to build your own embedded components for Processor Expert Software, which you can distribute freely or sell for profit. Instead of writing application code from scratch, a software engineer can use your component in their application - saving time and money.
MCAT is an HMTL-based user-friendly graphic plug-in for the FreeMASTER debugger tool for developing Permanent Magnet Synchronous Motor (PMSM) field-oriented control (FOC) applications with real-time control structure parameter tuning. MCAT helps adapt NXP motor control solutions without needing in-depth knowledge of Proportional Integral (PI) control constant calculations.
Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.
Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.
Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash supporting over 250 MB/s of bandwidth.