MC56F84xxx: Digital Signal Controllers

PEmicro's PROGDSC software allows the user to program/reprogram external flash devices in-circuit via PEmicro's BDM interface Hardware (sold separately). The programmer talks to the processor through the DSC-compatible hardware interface which connects the parallel port or USB port of a PC to a standard debug connector on the target system.

NXP’s Power Management Bus (PMBus) is an open standard power-management protocol with fully defined commands that support communication with power converters and other digital power-management devices and host processors in a power system.

TensorFlow Lite, a low latency, smaller footprint inference engine, uses the Eigen library and techniques such as pre-fused activations and quantized kernels.

NXP has developed safety features, including an IEC60730 Safety Library, to help manufacturers of automatic controls in the large appliance and industrial control market meet the IEC 60730 class B regulation

Software offered 'As is', support provided on NXP^® Communities only. Freescale^® Embedded Software Libraries 4.0 (CM0+, CM4)

Software offered 'As is', support provided on NXP^® Communities only

Software offered 'As is', support provided on NXP^® Communities only – Contains four libraries. General Function Library (GFLIB) comprising basic trigonometric functions as well as general mathematical functions. General Digital Filters Library (GDFLIB) comprising digital IIR and FIR filters. Motor Control Library (MCLIB) comprising standard algorithms used for motor control. Advanced Control Library (ACLIB) comprising complex motor control algorithms used in advanced motor control.

Our CodeWarrior for MCU's v11 integrates the development tools for the ColdFire. ColdFire+, DSC, Kinetis. Qorivva, RS08, S08 and S12Z architectures into a single product based on the Eclipse open development platform. Eclipse offers an excellent framework for building software development environments and is a standard framework used by many embedded software vendors.

The DSP56800E Quick Start is a software environment for the embedded applications development, based on the Graphical Configuration Tool and a unified Application Programming Interface (API)-style of accessing the peripheral modules.

Graphical PC host tool to control and debug embedded applications in run-time.

MCAT is an HMTL-based user-friendly graphic plug-in for the FreeMASTER debugger tool for developing Permanent Magnet Synchronous Motor (PMSM) field-oriented control (FOC) applications with real-time control structure parameter tuning. MCAT helps adapt NXP motor control solutions without needing in-depth knowledge of Proportional Integral (PI) control constant calculations.

P and E’s USB Multilink Universal combines support in a single interface for many NXP architectures.

Supports many NXP processor families and offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.

The CodeWarrior USB TAP host target interface is a feature-packed, run control tool that saves development time during bring-up and debugging.

P and E’s USB Multilink Universal FX is a high-speed, all-in-one development interface which allows PC access to the Background Debug Mode or JTAG interface.

The MAPS-56F84000 evaluation suite is a full-featured, multi-function development platform for the 56F84xxx digital signal controller (DSC). This suite includes a controller board with MC56F84789VLL on board and a motor control driver board which can drive dual PMSM motor at the same time. Use this suite to evaluate the exciting performance of NXP’s powerful DSC products customized for motor control applications.

The NXP TWR-56F8400 is a standalone development board ideally suited for Motor and Digital Power control applications.