The MAPS-56F84000 evaluation suite is a full-featured, multi-function development platform for the 56F84xxx digital
signal controller (DSC). This suite includes a controller board with MC56F84789VLL on board and a motor control
driver board which can drive dual PMSM motor at the same time. Use this suite to evaluate the exciting performance
of NXP’s powerful DSC products customized for motor control applications.
2x high speed 12-bit ADC, 16-bit SAR ADC, 4x Analog Comparator, 12-bit DAC
Inter-module crossbar, AOI logic operation unit
Support two PMSM/BLDC/Servo motor at the same time
Provide free sample code for general function evaluation of the controller
Provide free sample code for dual 3-phase motor control
Controller board with all kinds of communication interfaces, include SPI, I2C, UART, CAN, RS485, UART to USB
Driver board include two motor control driver circuit, each with four driver bridge, to support single 3-phase circuit or two 2-phase circuit. Each driver circuit include 3-phase current detection circuit, over current protection circuit, encoder interface, hall sensor interface and DB15 motor position sensor interface
On board OSBDM debug through USB interface, no need external debugger
Also support debugger through JTAG interface with PEMicro Multilink Universal debugger
There was an error - check the logs for details
1. Review this User's Guide to get familiar with the hardware specifications.
This family of digital signal controllers (DSCs) is based on the 32-bit 56800EX core. This MC56F847xx has the following features: 100 MIPS at 100 MHz core frequency, 288 KB (256 KB + 32 KB) flash memory, including up to 32 KB FlexNVM, 2 KB FlexRAM with EEE capability, Up to three queued SPI (QSPI) modules, Supports the 56F84789VLL, 56F84786VLK, 56F84769VLL, 56F84766VLK, 56F84763VLH.
This document describes the features, architecture, and programming model of the MC56F84xx series of digital signal controller (DSC) devices. This document is primarily for system architects and software application developers who are using or considering using these DSCs in a system. Supports 56F84789, 56F84786, 56F84769, 56F84766, 56F84763.
Our CodeWarrior for MCU's v11 integrates the development tools for the ColdFire. ColdFire+, DSC, Kinetis. Qorivva, RS08, S08 and S12Z architectures into a single product based on the Eclipse open development platform. Eclipse offers an excellent framework for building software development environments and is a standard framework used by many embedded software vendors.