Library core self-test (CST) software specifically created for the S12Z core. Tested on MC9S12ZVM-Family microcontroller and developed using CodeWarrior for MCUs 10.7 –include Quality, Safety, and User documentation.
Our CodeWarrior for MCU's v11 integrates the development tools for the ColdFire. ColdFire+, DSC, Kinetis. Qorivva, RS08, S08 and S12Z architectures into a single product based on the Eclipse open development platform. Eclipse offers an excellent framework for building software development environments and is a standard framework used by many embedded software vendors.
IDE and Build Tools
MCAT is an HMTL-based user-friendly graphic plug-in for the FreeMASTER debugger tool for developing Permanent Magnet Synchronous Motor (PMSM) field-oriented control (FOC) applications with real-time control structure parameter tuning. MCAT helps adapt NXP motor control solutions without needing in-depth knowledge of Proportional Integral (PI) control constant calculations.
Application Development Tools
P and E’s USB Multilink Universal combines support in a single interface for many NXP architectures.
Emulators, Probes, and Programmers
Supports many NXP processor families and offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
Emulators, Probes, and Programmers
P and E’s USB Multilink Universal FX is a high-speed, all-in-one development interface which allows PC access to the Background Debug Mode or JTAG interface.
Emulators, Probes, and Programmers
P and E's CYCLONE programmer is a powerful in-circuit, stand-alone programmer for many NXP processor families. It's a versatile tool that offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
Emulators, Probes, and Programmers
The S12ZVMAEVB is a development board for the S12 MagniV S12ZVM 16-bit MCUs targeted for DC motor control applications and simple loads via LIN or PWM command
Evaluation and Development Boards
.jpg)
emWin the most efficient and comprehensive GUIs available. It is written in ANSI C and supports any display controller, display and CPU. emWin includes the AppWizard GUI design tool and a Simulation Environment to help speed your development.
emFile is an embedded file system which can be used with any type of storage device. A Microsoft Windows compatible FAT12/16/32 format, and a proprietary SEGGER EFS format are available. Support for NAND, NOR, SD, SDHC, MMC, eMMC, IDE, CompactFlash.
embOS is an ANSI-C RTOS which has been used within products throughout the embedded industry for more than twenty years. During this time the SEGGER team has improved and optimized embOS to continuously meet the demands of modern NXP hardware.
Multilink Universal FX is a high-speed,BDM/JTAG debug probe for Kinetis, LPC, S32, Qorivva MPC5xxx, MPC5xx/8xx, ColdFire, HC(S)12(X), S12Z, HCS08, RS08, DSC, 683xx, & HC16 devices. Supports SWO debug tools in NXP's MCUXpresso IDE.
Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.
The USB Multilink Universal is an all-in-one BDM/JTAG debug probe for NXP Kinetis, LPC, i.MX, S32, HCS08, HC(S)12(X), S12Z, RS08, ColdFire V1/+V1, ColdFire V2-4*, Qorivva MPC5xxx, & DSC microcontrollers. Supports SWO debug tools in NXP's MCUXpresso.
Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.