50–75 MHz Precision Metrology MCUs with Segment LCDs Based on Arm® Cortex®-M0+

Product Details

Select a section:

Block Diagram

KM3x MCU Family

KM3x MCU Family Block Diagram

Features

General Features

  • High-performance Arm® Cortex®-M0 core, up to 75 MHz of core clock frequency
  • 512 KB/256 KB/64 KB single array flash
  • Supports v6-M Instruction Set Architecture (ISA) including all 16-bit v7-M instructions plus a number of 32-bit thumb-2 instructions
  • PLL to generate clocks for AFE
    • Input range: 31.25 kHz to 39.0625 kHz
    • Output range: 11.72 MHz to 14.65 MHz
  • FLL to generate core, system and flash clocks
    • Input range: 31.25 kHz to 39.0625 kHz
    • Output Range: 20 MHz to 50 MHz
  • Flexible modes of operation
  • Two internal trimmable clock references
    • 32 kHz
    • 4 MHz

Analog Front End

  • 24-bit sigma delta ADC with 94 dB SNR
  • Programmable gain amplifier with gains from 1 to 32 with low temperature drift
  • High precision internal voltage reference with low temperature drift

Security

  • Tamper detection with time stamping
  • Random number generator, memory protection unit
  • Memory Mapped Cryptographic Acceleration Unit (MMCAU) for AES Encryption
  • Cyclic Redundancy Check (CRC)

Interfaces

  • Voltage range 1.71 volts - 3.6 volts (without AFE)
  • Voltage range 2.7 volts - 3.6 volts (with AFE)
  • Temperature range -40°C to 105°C

Part numbers include: MKM33Z128ACLH5, MKM33Z128ACLL5, MKM33Z128CLH5, MKM33Z128CLL5, MKM33Z64ACLH5, MKM33Z64ACLL5, MKM33Z64CLH5, MKM33Z64CLL5, MKM34Z128ACLL5, MKM34Z128CLL5, MKM34Z256VLL7, MKM34Z256VLQ7, MKM35Z256VLL7, MKM35Z256VLQ7, MKM35Z512VLL7, MKM35Z512VLQ7.

Documentation

Quick reference to our documentation types.

1-5 of 70 documents

Show All

Design Resources

Design Files

2 design files

Hardware

1-5 of 15 hardware offerings

Show All

Software

1-5 of 7 software files

Show All

Note: For better experience, software downloads are recommended on desktop.

Engineering Services

1-5 of 10 engineering services

Show All

To find a complete list of our partners that support this product, please see our Partner Marketplace.

Training

1 trainings