LPC-Link 2 is an extensible, stand-alone debug probe that can be configured to support various development tools and IDEs using a variety of different downloadable firmware images. It can also be used as an evaluation board in its own right for the NXP LPC4370 triple core MCU. Through the use of an add-on board from Embedded Artists, it can be used as an oscilloscope or logic analyzer!
P and E's CYCLONE programmer is a powerful in-circuit, stand-alone programmer for many NXP processor families. It's a versatile tool that offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
Supports many NXP processor families and offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
The Component Development Environment (CDE) provides you with the tools to build your own embedded components for Processor Expert Software, which you can distribute freely or sell for profit. Instead of writing application code from scratch, a software engineer can use your component in their application - saving time and money.
Our CodeWarrior for MCU's v11 integrates the development tools for the ColdFire. ColdFire+, DSC, Kinetis. Qorivva, RS08, S08 and S12Z architectures into a single product based on the Eclipse open development platform. Eclipse offers an excellent framework for building software development environments and is a standard framework used by many embedded software vendors.
NXP has developed safety features, including an IEC60730 Safety Library, to help manufacturers of automatic controls in the large appliance and industrial control market meet the IEC 60730 class B regulation
The increased use of electronic devices in the medical domain has created a need for the development of a common protocol for data interchange between various devices. This problem is addressed by the IEEE-11073 Part 20601 (Optimized Exchange) specification. The Freescale Medical Connectivity Library is based on this specification and follows the Continua Health Alliance design guidelines for implementation.
The Tuning Wizard is a HMTL based user-friendly graphical plug-in tool for Our FreeMASTER. This tool is intended for the development of PMSM FOC applications, real time control structure parameter tuning and will aid motor control users in adapting NXP MC solutions to their motors without a detailed knowledge of PI controller constant calculations.
UNITACMP consists of interface routines which drive PEmicro's Multilink Universal, Multilink Universal FX, and Cyclone for ARM® devices. Create custom software, such as a production line tester! Includes both C/C++ & PASCAL modules.
The ULINKpro debug and trace unit connects your PC's USB port to your target system and allows you to program, debug, and analyze your applications using its unique streaming trace technology. ULINKpro is compatible with Keil MDK and Arm DS.
The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.
Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.
Lauterbach has experience in making world class microprocessor development tools since 1979. TRACE32 supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers and real-time trace solutions for all NXP processor series.
I-jet is a high-performing in-circuit debugging probe for ARM. It is capable of delivering power to the target board and measuring target power consumption. I-jet is fully plug-and-play and completely integrated with IAR Embedded Workbench for ARM.
The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.
The iC5000 is a single hardware platform supporting many different processors and microcontrollers. From the debug technology perspective, it supports on-chip debug emulation including on-chip trace buffers and Nexus/ETM trace.
µTrace is Lauterbach‘s all-in-one debug and trace solution for Cortex-M processors. Recommended for single and multi-core proccessors with 4 channel trace ports. Optional analogue probe for voltage, power and energy measurements available.
The iC5700 is a single hardware platform supporting many different processors and microcontrollers. From the debug technology perspective, it supports on-chip debug emulation including on-chip trace buffers and external (high speed) trace ports.
Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.
The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.
MicroEJ’s software platform disrupts the way to design NXP-based electronics through unrivaled virtualization technology. This software platform leverages NXP hardware & cloud innovations to produce more powerful devices and highly complex products.
Mbed offers an open source embedded operating system, free software libraries, online tools, cloud services and developer ecosystem to enable the creation and deployment at scale of IoT solutions based on Arm microcontrollers.
Highly config middleware libs/pkgs for gfx interfaces such as Qt or Embedded Wizard, mass storage, WiFi & networking comm, USB & other serial devices for today’s Medical, IoT & Industr’l apps; process model allows task/lib isolation & mem protection.
Nucleus has been deployed in over 3 billion devices since 1993 making the code base extremely stable. Nucleus is the only RTOS that offers a Power Management Framework to compliment hardware power modes to conserve power usage in the device.
emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems.
emSSL is a SEGGER software library that enables secure connections across the Internet. The small resource requirements such as 7kB RAM and 20kB ROM usage make emSSL the ideal product for single-chip-systems seeking security.
uC/TCP-IP is a robust embedded protocol stack written in accordance with the relevant RFCs. The stack is packaged with implementations of a number of popular application protocols and offers IPv4 and IPv6 support
EUSB Device is an embedded USB device stack. It provides Class Drivers for HID, Comms Device and Mass Storage. EUSB Device supports on-chip device controllers for a variety of processors and controllers.
MDK Middleware provides royalty-free, tightly-coupled software components that are specifically designed for communication peripherals in microcontrollers. It is provided as part of the MDK-Professional or MDK-Plus editions in binary format.
EUSB Host is an embedded USB host stack. It supports the on-chip host controllers a variety of processors and controllers. EUSB Host supports Class Drivers for Hub, HID, Comms Device, Mass Storage and Printer.
The uCMK6x IoT SOM is a turn-key platform for secure IoT systems. It features the K64 MCU, Ethernet and Wi-Fi networking combined with Mbarx Secure IoT firmware for cloud connectivity and remote management using TLS and PKI.
Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash supporting over 250 MB/s of bandwidth.