KL2x: Kinetis^® KL2x-72/96 MHz, USB Ultra-Low-Power Microcontrollers (MCUs) based on Arm^® Cortex^®-M0+ Core

The ULINKpro debug and trace unit connects your PC's USB port to your target system and allows you to program, debug, and analyze your applications using its unique streaming trace technology. ULINKpro is compatible with Keil MDK and Arm DS.

Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.

I-jet is a high-performing in-circuit debugging probe for ARM. It is capable of delivering power to the target board and measuring target power consumption. I-jet is fully plug-and-play and completely integrated with IAR Embedded Workbench for ARM.

ULINKplus combines isolated debug connection, power measurement, and I/O for test automation. It gives you visibility to function, timing, and power consumption of your embedded application.

The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.

The iC5000 is a single hardware platform supporting many different processors and microcontrollers. From the debug technology perspective, it supports on-chip debug emulation including on-chip trace buffers and Nexus/ETM trace.

MLINKprgm: Programmer supports the whole Kinetis family MCUs. Can be used as stand alone programmer on-line programmer. It can also support gang programing.

Gather trace data from NXP ARM, Power Architecture and ColdFire.

The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.

The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.

Multilink Universal FX is a high-speed,BDM/JTAG debug probe for Kinetis, LPC, S32, Qorivva MPC5xxx, MPC5xx/8xx, ColdFire, HC(S)12(X), S12Z, HCS08, RS08, DSC, 683xx, & HC16 devices. Supports SWO debug tools in NXP's MCUXpresso IDE.

The iC5700 is a single hardware platform supporting many different processors and microcontrollers. From the debug technology perspective, it supports on-chip debug emulation including on-chip trace buffers and external (high speed) trace ports.

Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.

High speed on-chip download and run control.

The Arm DSTREAM family of high performance debug and trace probes enable Arm Development Studio to debug all Arm-based devices through a variety of interfaces.

Docked architecture:Easy to expand, To facilitate the evaluation MCU, User-friendly design reference, Complete peripheral functions. Supports the whole Kinetis family including K, L, and E series.

Kinetis MCU Evaluation Board: To support the whole Kinetis family including K, L, and E series. From K10-K70, KL10-KL40 K10-K70, L10-L40 series MCU

Source of board： 1）four touch keys for TSI application 2 ）3 LEDs 3）kinetis-10pin interface as SWD 4）All pins of MCU are connected to connector for customer.

Embedded Studio is a streamlined and powerful C/C++ IDE for ARM microcontrollers specifically designed to provide you with everything needed for professional embedded development: an all-in-one solution aiming at stability and a continuous workflow.

MULTI is a complete Integrated Development Environment (IDE) for embedded applications for C/C++, Embedded C++ and includes an advanced debugger, profiler, run-time memory checking, project builder, editor, instruction set simulator, and more.

winIDEA is an integrated development environment (IDE) that compliments all iSYSTEM hardware. - Editor, project and build manager, high level debugger - Tools to analyze program and data flow, performance measurement tools

winIDEA Open is an open and free integrated development environment, debugger and test platform for Cortex-M based embedded systems development. winIDEA Open supports different debug hardware and evaluation boards.

Keil MDK is the most comprehensive software development solution for Arm-based microcontrollers and includes all components that you need to create, build, and debug embedded applications.

The reference C/C++ toolchain for Arm processors. Arm’s C/C++ Compiler toolchain has been used to build code shipped in billions of devices worldwide.

Arm Development Studio is the most comprehensive embedded C/C++ dedicated software development toolchain for the architecture. It accelerates software engineering whilst helping you build robust and more efficient products.

IAR Embedded Workbench for ARM is an integrated development environment with project management tools and editor. It includes a highly optimizing C/C++ compiler and the comprehensive C-SPY Debugger with simulator and hardware debugging support.

Green Hills C and C++ compilers generate highly optimized code for NXP processors while strictly adhering to industry-standard language requirements.

Debug/ Trace tool for Cortex-M family -Supports Standard-JTAG and Serial Wire Debug Port for Cortex-M -Includes 256-MByte of trace RAM to support ITM and ETM -Trace Streaming up to 100 MByte/s -Concurrent debugging of two or more Cortex-M core

testIDEA offers Real-Time Unit Testing by execution of test cases and test vectors on the real customer hardware without code instrumentation. testIDEA uses the isystem.connect programming interface which is a free and open API set within winIDEA.

The MULTI advanced multicore debugger for C/C++ applications running on simulators, bare-board, INTEGRITY, u-velOSity, Linux native, Linux virtualized and home-grown.

Completely integrated with IAR Embedded Workbench, C-RUN helps you find errors at an early stage by checking application execution. It checks for arithmetic issues, bounds issues and heap integrity, and provides detailed runtime error information.

µC/Probe graphically visualizes the internals of any embedded system effortlessly, with just a few mouse clicks. Read and write the memory of any embedded target processor during run-time.

The SourcePoint debugger is targeted at making the developer task of debugging code a rewarding experience by providing access to the complexities of navigating ARM®-based SoC processors including CoreSight™ configuration.

UDE is a debug, trace and test platform for a wide range of embedded systems. It supports the debugging of multicore targets within one consistent user interface. Run-time analysis and outstanding scripting capabilities are more key features.

C-STAT is a fast and powerful static analysis tool that provides results directly in the IAR Embedded Workbench IDE. It checks compliance with rules as defined by MISRA C:2004, MISRA C++:2008 and MISRA C:2012, CWE and CERT C/C++.

Universal debug module with USB 3.0 interface to host computer (Windows and Linux). Supports all processor architectures. Interfacing to target is done with TRACE32 debug cable (must be ordered separately).

MicroEJ’s software platform disrupts the way to design NXP-based electronics through unrivaled virtualization technology. This software platform leverages NXP hardware & cloud innovations to produce more powerful devices and highly complex products.

Mbed offers an open source embedded operating system, free software libraries, online tools, cloud services and developer ecosystem to enable the creation and deployment at scale of IoT solutions based on Arm microcontrollers.

FreeRTOS+FAT SL is a market proven, DOS compatible, proprietary and supported FAT file system for use with FreeRTOS or in bare metal systems. FreeRTOS+FAT SL is intricately engineered to minimise both Flash and RAM footprint.

FreeRTOS+FAT is an open source, thread aware and scalable FAT12/FAT16/FAT32 DOS/Windows compatible embedded FAT file system. Featuring optional caching, directory name hashing, long file names, standard and extended error reporting, & stdio.h API.

Market leading RTOS from Real Time Engineers Ltd. that supports more than architectures and receives more than 100,000 downloads a year. Professionally developed, strictly quality controlled, robust, supported, free for use in commercial products.

uC/OS-II is a real-time kernel with a history of use in safety-critical systems. The list of certified systems developed around this kernel is lengthy, and includes a number of DO-178C, DAL A aerospace devices.

CMSIS-RTOS RTX Real-Time Operating System is designed for Cortex-M processor-based devices. The RTX kernel can be used for creating applications that perform multiple tasks simultaneously.

Run time diagnostic tool for FreeRTOS that captures valuable dynamic behaviour information for offline display in more than a dozen graphically interconnected views.

The royalty free micro velOSity microkernel is the smallest of the Green Hills RTOS family. It is minimal footprint, 2.6 KB, and simple programming interface are perfect for lightweight applications.

emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems.

uC/FS is a highly flexible FAT file system with support for a wide variety of storage devices. The file system incorporates a journaling module to ensure the integrity of data during power failures.

emSSL is a SEGGER software library that enables secure connections across the Internet. The small resource requirements such as 7kB RAM and 20kB ROM usage make emSSL the ideal product for single-chip-systems seeking security.

uC/TCP-IP is a robust embedded protocol stack written in accordance with the relevant RFCs. The stack is packaged with implementations of a number of popular application protocols and offers IPv4 and IPv6 support

MDK Middleware provides royalty-free, tightly-coupled software components that are specifically designed for communication peripherals in microcontrollers. It is provided as part of the MDK-Professional or MDK-Plus editions in binary format.

Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash supporting over 250 MB/s of bandwidth.

Device Lifecycle Management (DLM) Protects hardware and software IP during all facets of the manufacturing process against counterfeiting, cloning and other tampering.

The SX-ULPAN is an ultra-low-power Wi-Fi module with dual-band 802.11a/b/g/n.This low power Wi-Fi module is based on QCA4004 radio from Qualcomm and supports UART for host interface. The modules small form factor make it perfect for portable devices.