LPC1311FHN33|Arm Cortex-M3|32-bit MCU

Overview

The LPC1311FHN33 is an Arm Cortex-M3-based microcontroller for embedded applications featuring a high level of integration and low power consumption. The LPC1311FHN33 operates at CPU frequencies of up to 72 MHz. The peripheral complement of the LPC1311FHN33 includes up to 8 kB of flash memory, up to 2 kB of data memory, one Fast-mode plus (Fm+) I2C interface, one UART, four general purpose timers, and up to 28 general purpose I/O pins.

Features

Arm Cortex-M3 processor, running at frequencies of up to 72 MHz
Arm Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)
8 kB on-chip flash programming memory
4 kB SRAM
In-System Programming (ISP) and In-Application Programming (IAP)
UART with fractional baud rate generation
SSP controller with FIFO and multi-protocol capabilities
I2C-bus interface supporting full I2C-bus specification and Fast-mode Plus
Up to 26 General Purpose I/O (GPIO) pins
Four general purpose counter/timers
Programmable WatchDog Timer (WDT)
System tick timer
Serial Wire Debug and Serial Wire Trace port
High-current output driver (20 mA) on one pin
High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus
Integrated PMU (Power Management Unit)
Three reduced power modes: Sleep, Deep-Sleep, and Deep power-down
Single power supply (2.0 V to 3.6 V)
10-bit ADC with input multiplexing among 8 pins
GPIO pins can be used as edge and level sensitive interrupt sources
Clock output function with divider
Processor wake-up from Deep-sleep mode via a dedicated start logic
Brownout detect with four separate thresholds
Power-On Reset (POR)
Integrated oscillator with an operating range of 1 MHz to 25 MHz
12 MHz internal RC oscillator trimmed to 1 % accuracy
Programmable watchdog oscillator with a frequency range of 7.8 kHz to 1.8 MHz
System PLL allows CPU operation up to the maximum CPU rate
Code Read Protection (CRP) with different security levels
Device serial number for identification

Target Applications

eMetering
Lighting
Alarm systems
White goods

Features

Arm Cortex-M3 processor, running at frequencies of up to 72 MHz
Arm Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)
8 kB on-chip flash programming memory
4 kB SRAM
In-System Programming (ISP) and In-Application Programming (IAP)
UART with fractional baud rate generation
SSP controller with FIFO and multi-protocol capabilities
I2C-bus interface supporting full I2C-bus specification and Fast-mode Plus
Up to 26 General Purpose I/O (GPIO) pins
Four general purpose counter/timers
Programmable WatchDog Timer (WDT)
System tick timer
Serial Wire Debug and Serial Wire Trace port
High-current output driver (20 mA) on one pin
High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus
Integrated PMU (Power Management Unit)
Three reduced power modes: Sleep, Deep-Sleep, and Deep power-down
Single power supply (2.0 V to 3.6 V)
10-bit ADC with input multiplexing among 8 pins
GPIO pins can be used as edge and level sensitive interrupt sources
Clock output function with divider
Processor wake-up from Deep-sleep mode via a dedicated start logic
Brownout detect with four separate thresholds
Power-On Reset (POR)
Integrated oscillator with an operating range of 1 MHz to 25 MHz
12 MHz internal RC oscillator trimmed to 1 % accuracy
Programmable watchdog oscillator with a frequency range of 7.8 kHz to 1.8 MHz
System PLL allows CPU operation up to the maximum CPU rate
Code Read Protection (CRP) with different security levels
Device serial number for identification

Target Applications

eMetering
Lighting
Alarm systems
White goods

OM13045:LPCXpresso Board for LPC1347

Evaluation and Development Boards

Complementary products for your application

Step 1:

Step 2:

LPC1311FHN33: Entry-level 32-bit Microcontroller (MCU) based on Arm^® Cortex^®-M3 Core

Overview

Features

Target Applications

Features

Target Applications

sot865-3_3d

sot865-3_3d

Development Boards and Designs

Development Boards and Designs

Target Applications

Automotive

Industrial

Mobile

Smart Home

Technologies

Complementary products for your application

LPC1311FHN33: Entry-level 32-bit Microcontroller (MCU) based on Arm® Cortex®-M3 Core

Overview

Features

Target Applications

Features

Target Applications

sot865-3_3d

sot865-3_3d

Development Boards and Designs

Development Boards and Designs

Target Applications

Automotive

Industrial

Mobile

Smart Home

Technologies

Complementary products for your application

LPC1311FHN33: Entry-level 32-bit Microcontroller (MCU) based on Arm^® Cortex^®-M3 Core