LPC1347FBD48: Entry-level 32-bit Microcontroller (MCU) based on Arm^® Cortex^®-M3 Core

The iC5000 is a single hardware platform supporting many different processors and microcontrollers. From the debug technology perspective, it supports on-chip debug emulation including on-chip trace buffers and Nexus/ETM trace.

The ULINKpro debug and trace unit connects your PC's USB port to your target system and allows you to program, debug, and analyze your applications using its unique streaming trace technology. ULINKpro is compatible with Keil MDK and Arm DS.

The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.

The iC5700 is a single hardware platform supporting many different processors and microcontrollers. From the debug technology perspective, it supports on-chip debug emulation including on-chip trace buffers and external (high speed) trace ports.

Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.

Lauterbach has experience in making world class microprocessor development tools since 1979. TRACE32 supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers and real-time trace solutions for all NXP processor series.

ULINKplus combines isolated debug connection, power measurement, and I/O for test automation. It gives you visibility to function, timing, and power consumption of your embedded application.

Multilink Universal FX is a high-speed,BDM/JTAG debug probe for Kinetis, LPC, S32, Qorivva MPC5xxx, MPC5xx/8xx, ColdFire, HC(S)12(X), S12Z, HCS08, RS08, DSC, 683xx, & HC16 devices. Supports SWO debug tools in NXP's MCUXpresso IDE.

Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.

The USB Multilink Universal is an all-in-one BDM/JTAG debug probe for NXP Kinetis, LPC, i.MX, S32, HCS08, HC(S)12(X), S12Z, RS08, ColdFire V1/+V1, ColdFire V2-4*, Qorivva MPC5xxx, & DSC microcontrollers. Supports SWO debug tools in NXP's MCUXpresso.

The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.

The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.

The Arm DSTREAM family of high performance debug and trace probes enable Arm Development Studio to debug all Arm-based devices through a variety of interfaces.

The SX-ULPAN-SHIELD is a Wi-Fi module-based adapter board designed to plug into Arduino-compatible boards that contain a microcontroller (MCU), such as the Freedom development kits from NXP (FRDM-K22F) and other boards derived from Arduino.

MicroEJ’s software platform disrupts the way to design NXP-based electronics through unrivaled virtualization technology. This software platform leverages NXP hardware & cloud innovations to produce more powerful devices and highly complex products.

CMSIS-RTOS RTX Real-Time Operating System is designed for Cortex-M processor-based devices. The RTX kernel can be used for creating applications that perform multiple tasks simultaneously.

uC/OS-II is a real-time kernel with a history of use in safety-critical systems. The list of certified systems developed around this kernel is lengthy, and includes a number of DO-178C, DAL A aerospace devices.

emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems.

uC/FS is a highly flexible FAT file system with support for a wide variety of storage devices. The file system incorporates a journaling module to ensure the integrity of data during power failures.

emSSL is a SEGGER software library that enables secure connections across the Internet. The small resource requirements such as 7kB RAM and 20kB ROM usage make emSSL the ideal product for single-chip-systems seeking security.

uC/TCP-IP is a robust embedded protocol stack written in accordance with the relevant RFCs. The stack is packaged with implementations of a number of popular application protocols and offers IPv4 and IPv6 support

MDK Middleware provides royalty-free, tightly-coupled software components that are specifically designed for communication peripherals in microcontrollers. It is provided as part of the MDK-Professional or MDK-Plus editions in binary format.

Semiconductor volatile and non-volatile memories. DRAMs (DDR4,DDR3, DDR3, DDR, LPDDR4,LPDDR2), SRAMs, Flash Memories (SPI NOR, Parallel NOR, NAND, eMMC)

The SX-ULPAN is an ultra-low-power Wi-Fi module with dual-band 802.11a/b/g/n.This low power Wi-Fi module is based on QCA4004 radio from Qualcomm and supports UART for host interface. The modules small form factor make it perfect for portable devices.