LPC1788FET180: Scalable Mainstream 32-bit Microcontroller (MCU) based on Arm^® Cortex^®-M3 Core

Supercharge your IDE with the worlds fastest debug probe. The J-Link Flash download technology achieves a performance very close to the maximum speed possible. No other probe comes close. These speeds are achieved when working under any popular IDE.

The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.

In-Circuit-Flash-Programmer based on the J-Link family for production and in-field-service. Offers fastest flash algorithms available, multiple integration options (RS232, Ethernet, USB, two-wire) and stand alone mode.

Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.

Multilink Universal FX is a high-speed,BDM/JTAG debug probe for Kinetis, LPC, S32, Qorivva MPC5xxx, MPC5xx/8xx, ColdFire, HC(S)12(X), S12Z, HCS08, RS08, DSC, 683xx, & HC16 devices. Supports SWO debug tools in NXP's MCUXpresso IDE.

J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex devices. This has an Ethernet interface in addition to the USB interface. This includes a Flash programming utility, and boast a 3 MB/s download speed to RAM.

The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.

The iC5000 is a single hardware platform supporting many different processors and microcontrollers. From the debug technology perspective, it supports on-chip debug emulation including on-chip trace buffers and Nexus/ETM trace.

The iC5700 is a single hardware platform supporting many different processors and microcontrollers. From the debug technology perspective, it supports on-chip debug emulation including on-chip trace buffers and external (high speed) trace ports.

Builds atop the J-Link to further enhance the debug experience. The J-Link ULTRA+ is three times faster than the industry standard J-Link, at a 3 MBytes/s download speed to RAM. It comes complete with J-Flash, and Unlimited Flash Breakpoints.

Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.

The USB Multilink Universal is an all-in-one BDM/JTAG debug probe for NXP Kinetis, LPC, i.MX, S32, HCS08, HC(S)12(X), S12Z, RS08, ColdFire V1/+V1, ColdFire V2-4*, Qorivva MPC5xxx, & DSC microcontrollers. Supports SWO debug tools in NXP's MCUXpresso.

The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.

The SX-ULPAN-SHIELD is a Wi-Fi module-based adapter board designed to plug into Arduino-compatible boards that contain a microcontroller (MCU), such as the Freedom development kits from NXP (FRDM-K22F) and other boards derived from Arduino.

IAR Embedded Workbench for ARM is an integrated development environment with project management tools and editor. It includes a highly optimizing C/C++ compiler and the comprehensive C-SPY Debugger with simulator and hardware debugging support.

Embedded Studio is a streamlined and powerful C/C++ IDE for ARM microcontrollers specifically designed to provide you with everything needed for professional embedded development: an all-in-one solution aiming at stability and a continuous workflow.

Green Hills C and C++ compilers generate highly optimized code for NXP processors while strictly adhering to industry-standard language requirements.

In-system programming of on-chip flash, on-chip RAM and external flash.

MULTI is a complete Integrated Development Environment (IDE) for embedded applications for C/C++, Embedded C++ and includes an advanced debugger, profiler, run-time memory checking, project builder, editor, instruction set simulator, and more.

winIDEA is an integrated development environment (IDE) that compliments all iSYSTEM hardware. - Editor, project and build manager, high level debugger - Tools to analyze program and data flow, performance measurement tools

winIDEA Open is an open and free integrated development environment, debugger and test platform for Cortex-M based embedded systems development. winIDEA Open supports different debug hardware and evaluation boards.

UDE is a debug, trace and test platform for a wide range of embedded systems. It supports the debugging of multicore targets within one consistent user interface. Run-time analysis and outstanding scripting capabilities are more key features.

Completely integrated with IAR Embedded Workbench, C-RUN helps you find errors at an early stage by checking application execution. It checks for arithmetic issues, bounds issues and heap integrity, and provides detailed runtime error information.

C-STAT is a fast and powerful static analysis tool that provides results directly in the IAR Embedded Workbench IDE. It checks compliance with rules as defined by MISRA C:2004, MISRA C++:2008 and MISRA C:2012, CWE and CERT C/C++.

The SourcePoint debugger is targeted at making the developer task of debugging code a rewarding experience by providing access to the complexities of navigating ARM®-based SoC processors including CoreSight™ configuration.

MicroEJ’s software platform disrupts the way to design NXP-based electronics through unrivaled virtualization technology. This software platform leverages NXP hardware & cloud innovations to produce more powerful devices and highly complex products.

emWin the most efficient and comprehensive GUIs available. It is written in ANSI C and supports any display controller, display and CPU. emWin includes a GUI Builder and Simulation Environment to help speed your development.

embOS is an ANSI-C RTOS which has been used within products throughout the embedded industry for more than twenty years. During this time the SEGGER team has improved and optimized embOS to continuously meet the demands of modern NXP hardware.

emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems.

uC/FS is a highly flexible FAT file system with support for a wide variety of storage devices. The file system incorporates a journaling module to ensure the integrity of data during power failures.

emSSL is a SEGGER software library that enables secure connections across the Internet. The small resource requirements such as 7kB RAM and 20kB ROM usage make emSSL the ideal product for single-chip-systems seeking security.

uC/TCP-IP is a robust embedded protocol stack written in accordance with the relevant RFCs. The stack is packaged with implementations of a number of popular application protocols and offers IPv4 and IPv6 support

emUSB Device is a high speed USB device stack. This is written in ANSI C and can run on any platform. emUSB can be used with embOS or any RTOS chosen. A variety of target drivers are available. Support for new platforms can usually be added no cost.

embOS/IP is an ANSI-C TCP/IP Stack written specifically for embedded applications while extending the standard socket interface. This is complemented by a speed optimized true Zero-Copy API which reads and writes data without the use of a memcopy.

emUSB Host, SEGGER’s USB host software stack, implements full USB host functionality, including external hub support, and optionally provides device class drivers. It enables developers to easily add USB host functionality to an embedded system.

Compliant bootloader for CANopen networks.

Compliant and mature CANopen stack with a range of module add-ons.

WIFI, POE and GSM updated ePaper sign

The SX-ULPAN is an ultra-low-power Wi-Fi module with dual-band 802.11a/b/g/n.This low power Wi-Fi module is based on QCA4004 radio from Qualcomm and supports UART for host interface. The modules small form factor make it perfect for portable devices.