LPCScrypt is a command-line based, fast flash, EEPROM, OTP and security programming tool for LPC1800 and LPC4300 series microcontrollers. LPCScrypt consists of two parts, a multi-platform command line tool and an MCU firmware monitor. In use, the firmware monitor is downloaded to the target MCU using USB DFU support built into the on-chip ROM (using USB0 or USB1)
P and E's CYCLONE programmer is a powerful in-circuit, stand-alone programmer for many NXP processor families. It's a versatile tool that offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
Supports many NXP processor families and offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
LPC-Link 2 is an extensible, stand-alone debug probe that can be configured to support various development tools and IDEs using a variety of different downloadable firmware images. It can also be used as an evaluation board in its own right for the NXP LPC4370 triple core MCU. Through the use of an add-on board from Embedded Artists, it can be used as an oscilloscope or logic analyzer!
emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems
emUSB Device is a high speed USB device stack. This is written in ANSI C and can run on any platform. emUSB can be used with embOS or any RTOS chosen. A variety of target drivers are available. Support for new platforms can usually be added no cost.
emWin the most efficient and comprehensive GUIs available. It is written in ANSI C and supports any display controller, display and CPU. emWin includes the AppWizard GUI design tool and a Simulation Environment to help speed your development.
emNet is an ANSI-C TCP/IP Stack written specifically for embedded applications while extending the standard socket interface. This is complemented by a speed optimized true Zero-Copy API which reads and writes data without the use of a memcopy.
emMQTT is provides the client functionality of the Message Queue Telemetry Transport protocol to a stack. emMQTT uses sockets and can be used with any IP stack such as emNet using the socket interface.
emUSB Host, SEGGER’s USB host software stack, implements full USB host functionality, including external hub support, and optionally provides device class drivers. It enables developers to easily add USB host functionality to an embedded system.
emModbus, SEGGER's implementation of the Modbus protocol, supports communication via UART (ASCII, RTU), Ethernet (Modbus/TCP and Modbus/UDP), and is capable to communicate with any Modbus compliant device.
emFile is an embedded file system which can be used with any type of storage device. A Microsoft Windows compatible FAT12/16/32 format, and a proprietary SEGGER EFS format are available. Support for NAND, NOR, SD, SDHC, MMC, eMMC, IDE, CompactFlash.
MDK Middleware provides royalty-free, tightly-coupled software components that are specifically designed for communication peripherals in microcontrollers. It is provided as part of the MDK-Professional or MDK-Plus editions in binary format.
emSSL is a SEGGER software library that enables secure connections across the Internet. The small resource requirements such as 7kB RAM and 20kB ROM usage make emSSL the ideal product for single-chip-systems seeking security.
The IoT Toolkit is a collection of libraries that enables communication with modern IoT based environments and devices. It's a high-performance collection of libraries optimized for minimum memory consumption in RAM, ROM, high speed, and versatility.
FreeRTOS+FAT is an open source, thread aware and scalable FAT12/FAT16/FAT32 DOS/Windows compatible embedded FAT file system. Featuring optional caching, directory name hashing, long file names, standard and extended error reporting, & stdio.h API.
Most toolchains using GCC also use either newlib, newlib-nano or glibc. Unfortunately, these libraries have significant disadvantages over professional runtime libraries for embedded systems. This is where the SEGGER Runtime Library comes in.
Developed in partnership with the world’s leading chip companies over a 15-year period, and now downloaded every 175 seconds, FreeRTOS is a market-leading real-time operating system (RTOS) for microcontrollers and small microprocessors.
emCompress offers solutions to compress data for all kinds of applications where size matters. Designed for embedded systems, emCompress can compress and decompress data even on smallest microcontrollers.
embOS is an ANSI-C RTOS which has been used within products throughout the embedded industry for more than twenty years. During this time the SEGGER team has improved and optimized embOS to continuously meet the demands of modern NXP hardware.
A common challenge for manufacturers of embedded systems is to guarantee a system's firmware can be updated easily. To fix bugs in the field or to enhance the features of deployed systems, SEGGER provides emLoad, the bootloader for firmware updates.
Embedded Studio is a streamlined and powerful C/C++ IDE for ARM microcontrollers specifically designed to provide you with everything needed for professional embedded development: an all-in-one solution aiming at stability and a continuous workflow.
MULTI is a complete Integrated Development Environment (IDE) for embedded applications for C/C++, Embedded C++ and includes an advanced debugger, profiler, run-time memory checking, project builder, editor, instruction set simulator, and more.
Arm Development Studio is the most comprehensive embedded C/C++ dedicated software development toolchain for the architecture. It accelerates software engineering whilst helping you build robust and more efficient products.
IAR Embedded Workbench for Arm is an integrated development environment with project management tools and editor. It includes a highly optimizing C/C++ compiler and the comprehensive C-SPY Debugger with simulator and hardware debugging support.
Completely integrated with IAR Embedded Workbench, C-RUN helps you find errors at an early stage by checking application execution. It checks for arithmetic issues, bounds issues and heap integrity, and provides detailed runtime error information.
SystemView is a real-time recording and visualization tool for embedded systems that reveals the true runtime behavior of an application, going far deeper than the system insights provided by debuggers.
Free of charge instruction set simulator with the same powerful user interface and features of the TRACE32 debug and trace tools. With API for peripheral simulation. A license is required if used in automated test environments.
Ozone is more than a simple debugger. Its various features, including trace, code profiling and code coverage analysis make it a powerful performance analyzer, which enable you to get full system insight, and to track down inefficiencies and bugs.
UDE is a debug, trace and test platform for a wide range of embedded systems. It supports the debugging of multicore targets within one consistent user interface. Run-time analysis and outstanding scripting capabilities are more key features.
C-STAT is a fast and powerful static analysis tool that provides results directly in the IAR Embedded Workbench IDE. It checks compliance with rules as defined by MISRA C:2004, MISRA C++:2008 and MISRA C:2012, CWE and CERT C/C++.
JTAG/SWD debug probe with USB interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production purposes.
The ULINKpro debug and trace unit connects your PC's USB port to your target system and allows you to program, debug, and analyze your applications using its unique streaming trace technology. ULINKpro is compatible with Keil MDK and Arm DS.
The J-Link EDU emulator is our standard J-Link emulator wrapped in a new educational marked housing. It is intended for educational use and the home hobbyist. Support for our Unlimited Flash Breakpoints and GDB Server enhancement modules included.
Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.
Lauterbach has experience in making world class microprocessor development tools since 1979. TRACE32 supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers and real-time trace solutions for all NXP processor series.
J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex devices. This has an Ethernet interface in addition to the USB interface. This includes a Flash programming utility, and boast a 3 MB/s download speed to RAM.
The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.
Flasher Secure is a mass production programming system, capable of protecting the vendor’s IP regardless of the production site. It provides full control over the programming process at contract manufacturers (CM) and similar environments.
J-Trace PRO for Cortex-M is setting a new standard for trace probes. It enables continuous streaming trace, lifting the limitations by internal buffers and slow data transmission to give you all the insights you need to develop & optimize your code.
Builds atop the J-Link to further enhance the debug experience. The J-Link ULTRA+ is three times faster than the industry standard J-Link, at a 3 MBytes/s download speed to RAM. It comes complete with J-Flash, and Unlimited Flash Breakpoints.
Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.
J-Trace PRO Cortex provides support for Cortex-A/R/M based microcontrollers. The SuperSpeed USB 3.0 interface of J-Trace PRO Cortex enables continuous streaming trace via USB with the full trace clock, lifting the limitations by internal buffers.
The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.
Supercharge your IDE with the worlds fastest debug probe. The J-Link Flash download technology achieves a performance very close to the maximum speed possible. No other probe comes close. These speeds are achieved when working under any popular IDE.
The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.
In-Circuit-Flash-Programmer based on the J-Link family for production and in-field-service. Offers fastest flash algorithms available, multiple integration options (RS232, Ethernet, USB, two-wire) and stand alone mode.
The Flasher Hub controls multiple Flasher Compacts so that they program simultaneously. Up to 24 Flashers can be connected to create a single, powerful gang programmer for efficient high-speed parallel programming.
Interactive flash programming software for ARM Cortex-M devices, including NXP's Kinetis, LPC, i.MX RT, and S32 devices. Comes with command-line version for scripted programming. Communicates using compatible PEmicro hardware interfaces.
The handheld stand-alone Flash Programmer for on-chip and external flash memory. Flasher Portable PLUS is a battery driven programming tool for microcontrollers with on-chip and/or external flash memory.
JTAG/SWD debug probe with WiFi interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production purposes.