LPC1853FET256: High Performance 32-bit Microcontroller (MCU) based on Arm^® Cortex^®-M3 Core

emCrypt is a secure and efficient implementation of essential cryptographic algorithms specifically designed for embedded systems.

emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems

Provide easy to use graphical interfaces to control your target. Can be used from any device that has a browser such as PC/Mac and mobile devices. Easy to maintain by separating design and content.

emUSB Device is a high speed USB device stack. This is written in ANSI C and can run on any platform. emUSB can be used with embOS or any RTOS chosen. A variety of target drivers are available. Support for new platforms can usually be added no cost.

Compliant and mature CANopen and CANopen FD slave and manager stack with a range of module add-ons. Designed to run in any environment: bare-metal, RTOS or consumer OS.

emWin the most efficient and comprehensive GUIs available. It is written in ANSI C and supports any display controller, display and CPU. emWin includes the AppWizard GUI design tool and a Simulation Environment to help speed your development.

emNet is an ANSI-C TCP/IP Stack written specifically for embedded applications while extending the standard socket interface. This is complemented by a speed optimized true Zero-Copy API which reads and writes data without the use of a memcopy.

emMQTT is provides the client functionality of the Message Queue Telemetry Transport protocol to a stack. emMQTT uses sockets and can be used with any IP stack such as emNet using the socket interface.

emUSB Host, SEGGER’s USB host software stack, implements full USB host functionality, including external hub support, and optionally provides device class drivers. It enables developers to easily add USB host functionality to an embedded system.

emModbus, SEGGER's implementation of the Modbus protocol, supports communication via UART (ASCII, RTU), Ethernet (Modbus/TCP and Modbus/UDP), and is capable to communicate with any Modbus compliant device.

emFile is an embedded file system which can be used with any type of storage device. A Microsoft Windows compatible FAT12/16/32 format, and a proprietary SEGGER EFS format are available. Support for NAND, NOR, SD, SDHC, MMC, eMMC, IDE, CompactFlash.

emSSH is a secure shell software library that enables a secure login into your embedded system.

MDK Middleware provides royalty-free, tightly-coupled software components that are specifically designed for communication peripherals in microcontrollers. It is provided as part of the MDK-Professional or MDK-Plus editions in binary format.

emSSL is a SEGGER software library that enables secure connections across the Internet. The small resource requirements such as 7kB RAM and 20kB ROM usage make emSSL the ideal product for single-chip-systems seeking security.

The IoT Toolkit is a collection of libraries that enables communication with modern IoT based environments and devices. It's a high-performance collection of libraries optimized for minimum memory consumption in RAM, ROM, high speed, and versatility.

Most toolchains using GCC also use either newlib, newlib-nano or glibc. Unfortunately, these libraries have significant disadvantages over professional runtime libraries for embedded systems. This is where the SEGGER Runtime Library comes in.

Market leading RTOS from Real Time Engineers Ltd. that supports more than architectures and receives more than 100,000 downloads a year. Professionally developed, strictly quality controlled, robust, supported, free for use in commercial products.

emCompress offers solutions to compress data for all kinds of applications where size matters. Designed for embedded systems, emCompress can compress and decompress data even on smallest microcontrollers.

CMSIS-RTOS RTX Real-Time Operating System is designed for Cortex-M processor-based devices. The RTX kernel can be used for creating applications that perform multiple tasks simultaneously.

embOS is an ANSI-C RTOS which has been used within products throughout the embedded industry for more than twenty years. During this time the SEGGER team has improved and optimized embOS to continuously meet the demands of modern NXP hardware.

A common challenge for manufacturers of embedded systems is to guarantee a system's firmware can be updated easily. To fix bugs in the field or to enhance the features of deployed systems, SEGGER provides emLoad, the bootloader for firmware updates.

Embedded Studio is a streamlined and powerful C/C++ IDE for ARM microcontrollers specifically designed to provide you with everything needed for professional embedded development: an all-in-one solution aiming at stability and a continuous workflow.

Keil MDK is the most comprehensive software development solution for Arm-based microcontrollers and includes all components that you need to create, build, and debug embedded applications.

The reference C/C++ toolchain for Arm processors. Arm’s C/C++ Compiler toolchain has been used to build code shipped in billions of devices worldwide.

Arm Development Studio is the most comprehensive embedded C/C++ dedicated software development toolchain for the architecture. It accelerates software engineering whilst helping you build robust and more efficient products.

IAR Embedded Workbench for Arm is an integrated development environment with project management tools and editor. It includes a highly optimizing C/C++ compiler and the comprehensive C-SPY Debugger with simulator and hardware debugging support.

Completely integrated with IAR Embedded Workbench, C-RUN helps you find errors at an early stage by checking application execution. It checks for arithmetic issues, bounds issues and heap integrity, and provides detailed runtime error information.

SystemView is a real-time recording and visualization tool for embedded systems that reveals the true runtime behavior of an application, going far deeper than the system insights provided by debuggers.

Ozone is more than a simple debugger. Its various features, including trace, code profiling and code coverage analysis make it a powerful performance analyzer, which enable you to get full system insight, and to track down inefficiencies and bugs.

UDE is a debug, trace and test platform for a wide range of embedded systems. It supports the debugging of multicore targets within one consistent user interface. Run-time analysis and outstanding scripting capabilities are more key features.

C-STAT is a fast and powerful static analysis tool that provides results directly in the IAR Embedded Workbench IDE. It checks compliance with rules as defined by MISRA C:2004, MISRA C++:2008 and MISRA C:2012, CWE and CERT C/C++.

In-system programming of on-chip flash, on-chip RAM and external flash.

JTAG/SWD debug probe with USB interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production purposes.

The ULINKpro debug and trace unit connects your PC's USB port to your target system and allows you to program, debug, and analyze your applications using its unique streaming trace technology. ULINKpro is compatible with Keil MDK and Arm DS.

The J-Link EDU emulator is our standard J-Link emulator wrapped in a new educational marked housing. It is intended for educational use and the home hobbyist. Support for our Unlimited Flash Breakpoints and GDB Server enhancement modules included.

Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.

ULINKplus combines isolated debug connection, power measurement, and I/O for test automation. It gives you visibility to function, timing, and power consumption of your embedded application.

J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex devices. This has an Ethernet interface in addition to the USB interface. This includes a Flash programming utility, and boast a 3 MB/s download speed to RAM.

The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.

Flasher ATE is perfectly suited for high volume mass production environments.

Flasher Secure is a mass production programming system, capable of protecting the vendor’s IP regardless of the production site. It provides full control over the programming process at contract manufacturers (CM) and similar environments.

J-Trace PRO for Cortex-M is setting a new standard for trace probes. It enables continuous streaming trace, lifting the limitations by internal buffers and slow data transmission to give you all the insights you need to develop & optimize your code.

Builds atop the J-Link to further enhance the debug experience. The J-Link ULTRA+ is three times faster than the industry standard J-Link, at a 3 MBytes/s download speed to RAM. It comes complete with J-Flash, and Unlimited Flash Breakpoints.

Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.

J-Trace PRO Cortex provides support for Cortex-A/R/M based microcontrollers. The SuperSpeed USB 3.0 interface of J-Trace PRO Cortex enables continuous streaming trace via USB with the full trace clock, lifting the limitations by internal buffers.

The USB Multilink Universal is an all-in-one BDM/JTAG debug probe for NXP Kinetis, LPC, i.MX, S32, HCS08, HC(S)12(X), S12Z, RS08, ColdFire V1/+V1, ColdFire V2-4*, Qorivva MPC5xxx, & DSC microcontrollers. Supports SWO debug tools in NXP's MCUXpresso.

The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.

Supercharge your IDE with the worlds fastest debug probe. The J-Link Flash download technology achieves a performance very close to the maximum speed possible. No other probe comes close. These speeds are achieved when working under any popular IDE.

The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.

In-Circuit-Flash-Programmer based on the J-Link family for production and in-field-service. Offers fastest flash algorithms available, multiple integration options (RS232, Ethernet, USB, two-wire) and stand alone mode.

Multilink Universal FX is a high-speed,BDM/JTAG debug probe for Kinetis, LPC, S32, Qorivva MPC5xxx, MPC5xx/8xx, ColdFire, HC(S)12(X), S12Z, HCS08, RS08, DSC, 683xx, & HC16 devices. Supports SWO debug tools in NXP's MCUXpresso IDE.

Interactive flash programming software for ARM Cortex-M devices, including NXP's Kinetis, LPC, i.MX, and S32 devices. Comes with command-line version for scripted programming. Communicates using compatible PEmicro hardware interfaces.

The handheld stand-alone Flash Programmer for on-chip and external flash memory. Flasher Portable PLUS is a battery driven programming tool for microcontrollers with on-chip and/or external flash memory.

JTAG/SWD debug probe with WiFi interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production purposes.

The Arm DSTREAM family of high performance debug and trace probes enable Arm Development Studio to debug all Arm-based devices through a variety of interfaces.