i.MX RT1050 Crossover MCU with Arm® Cortex®-M7 core

Overview

Features

i.MX RT1050 crossover MCU based on Cortex-M7

i.MX RT1050 crossover MCU based on Cortex-M7

i.MX RT crossover MCU in MAPBGA package

i.MX RT crossover MCU in MAPBGA package

Using i.MX RT1050 with CLRC663 plus family and the NFC Reader Library

Using i.MX RT1050 with CLRC663 <i>plus</i> family and the NFC Reader Library thumbnail

i.MX RT Crossover MCUs

i.MX RT Crossover MCUs thumbnail

i.MX RT1050 running an Embedded Wizard powered GUI Application

i.MX RT1050 running an Embedded Wizard powered GUI Application thumbnail

uClinux demo running on the NXP EVK board

uClinux demo running on the NXP EVK board thumbnail

i.MX RT1050 EVK with Storyboard Suite Demo Applications

i.MX RT1050 EVK with Storyboard Suite Demo Applications thumbnail

i.MX RT1050- How to Achieve Both Performance and Usability for Your Next-Gen IoT Product Design

i.MX RT1050- How to Achieve Both Performance and Usability for Your Next-Gen IoT Product Design thumbnail

Transfer learning between edge nodes

Transfer learning between edge nodes thumbnail

Food classification on i.MX8 + RT1050

Food classification on i.MX8 + RT1050 thumbnail

4x Motor Control NXP ICC

4x Motor Control NXP ICC thumbnail

MCU Tech Minutes | Qt for MCUs Thermostat Demo using i.MX RT1050 Evaluation Kit

MCU Tech Minutes | Qt for MCUs Thermostat Demo using i.MX RT1050 Evaluation Kit thumbnail

MCU Minutes | CANopen and CANopen FD in the MCUXpresso SDK

MCU Minutes | CANopen and CANopen FD in the MCUXpresso SDK thumbnail
.

Complementary products for your application

MCUXpresso Software and Tools

MCUXpresso Config Tools – A comprehensive suite of system configuration tools, including pins, clocks, SDK builder and more.

MCUXpresso SDK – An open-source software development kit (SDK) built specifically for your processor and evaluation board selections.

MCUXpresso IDE – An easy-to-use integrated development environment (IDE) for creating, building, debugging, and optimizing your application.

i.MX RT Series—The Crossover Between Applications Processors & MCUs

Until recently, embedded processing fell into two distinct camps based on the necessity of the design. Situations calling for affordable and flexible usability would rely on microcontrollers (MCUs). Designs that exceeded the capacity of an MCU would instead use an applications processor.

Read More

Your motor control designs just got a whole lot smarter with one little chip

Embedded solutions for motor control have historically been a big part of what we do at NXP—going all the way back to some of our Motorola product lines. In the past, motor control applications have typically relied on the affordable and flexible usability provided by microcontrollers (MCUs).

Read More