Linux Board Support Packages (BSPs) for NXP® Silicon are tested and certified ensuring a fully operational tool chain, kernel and board specific modules that are ready to use together within a fixed configuration for i.MX hardware development tools. These BSPs provide the foundation you need to begin your project quickly.
The J-Link EDU emulator is our standard J-Link emulator wrapped in a new educational marked housing. It is intended for educational use and the home hobbyist. Support for our Unlimited Flash Breakpoints and GDB Server enhancement modules included.
I-jet is a high-performing in-circuit debugging probe for ARM. It is capable of delivering power to the target board and measuring target power consumption. I-jet is fully plug-and-play and completely integrated with IAR Embedded Workbench for ARM.
J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex devices. This has an Ethernet interface in addition to the USB interface. This includes a Flash programming utility, and boast a 3 MB/s download speed to RAM.
The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.
Builds atop the J-Link to further enhance the debug experience. The J-Link ULTRA+ is three times faster than the industry standard J-Link, at a 3 MBytes/s download speed to RAM. It comes complete with J-Flash, and Unlimited Flash Breakpoints.
The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.
Supercharge your IDE with the worlds fastest debug probe. The J-Link Flash download technology achieves a performance very close to the maximum speed possible. No other probe comes close. These speeds are achieved when working under any popular IDE.
The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.
In-Circuit-Flash-Programmer based on the J-Link family for production and in-field-service. Offers fastest flash algorithms available, multiple integration options (RS232, Ethernet, USB, two-wire) and stand alone mode.
Wind River® Linux is the leader for building outstanding open source embedded products, ensuring customers work with the latest code from the most important open source efforts and most recent technologies.
The Green Hills BSP provides INTEGRITY & velOSity RTOSes and MULTI debugger for board- specific cross development through the Green Hills Probe, Slingshot or P&E Wiggler or, if no board is available, to the MULTI instruction set simulator.
MicroEJ’s software platform disrupts the way to design NXP-based electronics through unrivaled virtualization technology. This software platform leverages NXP hardware & cloud innovations to produce more powerful devices and highly complex products.
Highly config middleware libs/pkgs for gfx interfaces such as Qt or Embedded Wizard, mass storage, WiFi & networking comm, USB & other serial devices for today’s Medical, IoT & Industr’l apps; process model allows task/lib isolation & mem protection.
emWin the most efficient and comprehensive GUIs available. It is written in ANSI C and supports any display controller, display and CPU. emWin includes a GUI Builder and Simulation Environment to help speed your development.
embOS is an ANSI-C RTOS which has been used within products throughout the embedded industry for more than twenty years. During this time the SEGGER team has improved and optimized embOS to continuously meet the demands of modern NXP hardware.
A custom commercial Linux for embedded development leveraging the latest open source software, Yocto BSPs. Integrates with Sourcery CodeBench and Sourcery Analyzer for complex and multicore systems. GENIVI compliant for IVI platforms.
Deos is a time & space partitioned RTOS, certified to DO-178B, Level A since 1998. Deos offers several unique fundamental and patented architectural advantages and delivers a high performance, low risk, simple to certify solution.
Nucleus has been deployed in over 3 billion devices since 1993 making the code base extremely stable. Nucleus is the only RTOS that offers a Power Management Framework to compliment hardware power modes to conserve power usage in the device.
emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems.
SFFS is a failsafe flash file system for NOR and NAND devices. It provides complete reliability and protection against unexpected power failures or resets. SFFS provides wear leveling and ECC algorithms to ensure optimal use of flash.
emSSL is a SEGGER software library that enables secure connections across the Internet. The small resource requirements such as 7kB RAM and 20kB ROM usage make emSSL the ideal product for single-chip-systems seeking security.
PEG for MQX is a graphics library that supports multiple languages, fonts and video output devices including an on-chip LCD interface. It includes utilities that capture fonts, convert images and design windowing interfaces.
EUSB Device is an embedded USB device stack. It provides Class Drivers for HID, Comms Device and Mass Storage. EUSB Device supports on-chip device controllers for a variety of processors and controllers.
embOS/IP is an ANSI-C TCP/IP Stack written specifically for embedded applications while extending the standard socket interface. This is complemented by a speed optimized true Zero-Copy API which reads and writes data without the use of a memcopy.
MQX RTCS is a feature rich TCP/IP protocol stack that includes many application layer protocols. It is scalable enabling speed and footprint optimization. It includes Stack Aware Debugging plug in for CodeWarrior, IAR, and Keil Tools
Enea LINX is a high performance, transparent interprocess communications (IPC) service that simplifies communications across processors and within cores. LINX scales from DSPs to 64-bit CPUs for use within complex distributed systems.
emUSB Device is a high speed USB device stack. This is written in ANSI C and can run on any platform. emUSB can be used with embOS or any RTOS chosen. A variety of target drivers are available. Support for new platforms can usually be added no cost.
emUSB Host, SEGGER’s USB host software stack, implements full USB host functionality, including external hub support, and optionally provides device class drivers. It enables developers to easily add USB host functionality to an embedded system.
emFile is an embedded file system which can be used with any type of storage device. A Microsoft Windows compatible FAT12/16/32 format, and a proprietary SEGGER EFS format are available. Support for NAND, NOR, SD, SDHC, MMC, eMMC, IDE, CompactFlash.
EUSB Host is an embedded USB host stack. It supports the on-chip host controllers a variety of processors and controllers. EUSB Host supports Class Drivers for Hub, HID, Comms Device, Mass Storage and Printer.
Core Modules based on NXP I.MX28 Series Processors ，with 128MB DDR2 SDRAM, 256MB Nand Flash on Board.Two 1.27mm pitch 80-pin SMT Male Connectors for Board-to-Board Connections. Ready-to-Run Linux 2.6 BSP.
Highly Integrated SOM based on the i.MX28 with up to 454 MHz, up to 8 GB NAND (SLC), up to 256 MB DDR2, on-module 802.11abgn Wi-Fi (pre-certified) + Bluetooth 4.0 and Dual Ethernet connectivity options, Wi-Fi Direct support,Industrial temp available.
Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash supporting over 250 MB/s of bandwidth.
PIXI-9377 is a fully certified (FCC, TELEC, IC, CE, RCM) dual-band Wi-Fi 802.11a/b/g/n/ac with Bluetooth 5 SDIO module optimized for cost, size and performance. It is based on the QCA9377-3 chipset and drivers for NXP i.MX Series are available.
SX-SDCAC is a next generation 802.11a/b/g/n/ac plus Bluetooth SDIO card based on the QCA9377 System-on-Chip (SoC). The SX-SDCAC is mechanically designed in a SD card form factor to provide customers with a vendor independent form factor.
The i-PAN4 is a intelligent touchpanel based on the i.MX28 CPU. Various connectivity options with easy expandability are combined with a cap./res. touch display. The panel is designed for a quick and simple integration in customized equipments.