Supports many NXP processor families and offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
Our CodeWarrior® for MCU's v11 integrates the development tools for the ColdFire®. ColdFire+, DSC, Kinetis®. Qorivva, RS08, S08 and S12Z architectures into a single product based on the Eclipse open development platform. Eclipse offers an excellent framework for building software development environments and is a standard framework used by many embedded software vendors.
NXP Automotive audio video bridging (AVB) software provides complex AVB solution for multi-channel audio streaming and syntonized audio playback over multiple audio end nodes. It is optimized for NXP® Power Architecture® and Arm® Processors with minimal resource usage due to "zero-copy" approach with advanced DMA algorithms.
Library of instruction tests for the Power Architecture e200Zx family of MCU cores. Includes instruction tests for VLE, BookE, and SPE instruction sets . Includes report of the percentage of instructions that are covered by the tests (instruction coverage). Libary is not device specific and can be used with any MPC56xx using a Power Architecture e200Zx core.
AUTOSAR (Classic) v3.0 rev 3 compliant operating system. Compatible also with AUTOSAR v3.1 and v3.2. Tested with Green Hills MULTI, Wind River DIAB, CodeWarrior. AUTOSAR configuration tool EB tresos Studio included, solely for use with drivers of this package. AUTOSAR v4.x should be preferred over this version. Conditions of use for this software and other general information at www.autosar.org and at AUTOSAR .
The Tuning Wizard is a HMTL based user-friendly graphical plug-in tool for Our FreeMASTER. This tool is intended for the development of PMSM FOC applications, real time control structure parameter tuning and will aid motor control users in adapting NXP® MC solutions to their motors without a detailed knowledge of PI controller constant calculations.
The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.
Hardware Emulation and Trace system for embedded development with NXP’s Power Architecture® devices featuring (i) Non-intrusive debugging, (ii) Full Instruction Trace and Data Trace, and (iii) Performance Analysis and Code Coverage Analysis
Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.
The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.
The iC5000 is a single hardware platform supporting many different processors and microcontrollers. From the debug technology perspective, it supports on-chip debug emulation including on-chip trace buffers and Nexus/ETM trace.
The iC5700 is a single hardware platform supporting many different processors and microcontrollers. From the debug technology perspective, it supports on-chip debug emulation including on-chip trace buffers and external (high speed) trace ports.
Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.
The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.
A code generator that converts GUI model (built in Altia Design) into pure, production-ready C code. Each Altia DeepScreen target is carefully architected to take full advantage of the resources available on-chip.
A full-featured user interface design and model integration environment. With this GUI editor, users can build user interface models from scratch or import 2D and 3D graphic assets created by artists, test, and then prepare for code generation.
A Photoshop add-on that automatically transforms your artist's graphics into interactive, user-driven prototypes. Simply arrange and name your Photoshop graphics layers for buttons, screens and other user interface objects.
Compatibility Mode - Full support for existing legacy code, compile your existing code base nearly "As Is." C Compiler Toolkit for all eTPU and eTPU2 targets in Our MPC55xx, MPC56xx Power Architecture micros, MCF52xx Coldifre micros
MULTI is a complete Integrated Development Environment (IDE) for embedded applications for C/C++, Embedded C++ and includes an advanced debugger, profiler, run-time memory checking, project builder, editor, instruction set simulator, and more.
winIDEA is an integrated development environment (IDE) that compliments all iSYSTEM hardware. - Editor, project and build manager, high level debugger - Tools to analyze program and data flow, performance measurement tools
UDE is a debug, trace and test platform for a wide range of embedded systems. It supports the debugging of multicore targets within one consistent user interface. Run-time analysis and outstanding scripting capabilities are more key features.
Universal debug module with USB 3.0 interface to host computer (Windows and Linux). Supports all processor architectures. Interfacing to target is done with TRACE32 debug cable (must be ordered separately).
TRACE32 NEXUS AutoFocus (parallel) adapter for Qorivva MPC5xxx. Supports up to 16 MDOs, MSEO1/2, SDR and DDR modes. Provides signals for EVT, external watchdog disable and handshake for calibration tool operation. All pins 0.9V..5.5V compatible.
TRACE32-ICD for MPC5xxx is a high performance JTAG debugger. USB or ETH interface for connection to PC or workstations. Supports VLE, SPE, LSP, FLASH programming, MMU, CACHE debugging and many RTOS. eTPU, SPT and GTM debugger included.
Deos is a time & space partitioned RTOS, certified to DO-178B, Level A since 1998. Deos offers several unique fundamental and patented architectural advantages and delivers a high performance, low risk, simple to certify solution.
emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems.
emSSL is a SEGGER software library that enables secure connections across the Internet. The small resource requirements such as 7kB RAM and 20kB ROM usage make emSSL the ideal product for single-chip-systems seeking security.
uC/TCP-IP is a robust embedded protocol stack written in accordance with the relevant RFCs. The stack is packaged with implementations of a number of popular application protocols and offers IPv4 and IPv6 support