NXP Automotive audio video bridging (AVB) software provides complex AVB solution for multi-channel audio streaming and syntonized audio playback over multiple audio end nodes. It is optimized for NXP Power Architecture and Arm Processors with minimal resource usage due to "zero-copy" approach with advanced DMA algorithms.
Library of instruction tests for the Power Architecture e200Zx family of MCU cores. Includes instruction tests for VLE, BookE, and SPE instruction sets . Includes report of the percentage of instructions that are covered by the tests (instruction coverage). Libary is not device specific and can be used with any MPC56xx using a Power Architecture e200Zx core.
Our CodeWarrior for MCU's v11 integrates the development tools for the ColdFire. ColdFire+, DSC, Kinetis. Qorivva, RS08, S08 and S12Z architectures into a single product based on the Eclipse open development platform. Eclipse offers an excellent framework for building software development environments and is a standard framework used by many embedded software vendors.
MCAT is an HMTL-based user-friendly graphic plug-in for the FreeMASTER debugger tool for developing Permanent Magnet Synchronous Motor (PMSM) field-oriented control (FOC) applications with real-time control structure parameter tuning. MCAT helps adapt NXP motor control solutions without needing in-depth knowledge of Proportional Integral (PI) control constant calculations.
AUTOSAR (Classic) v3.0 rev 3 compliant operating system. Compatible also with AUTOSAR v3.1 and v3.2. Tested with Green Hills MULTI, Wind River DIAB, CodeWarrior. AUTOSAR configuration tool EB tresos Studio included, solely for use with drivers of this package. AUTOSAR v4.x should be preferred over this version. Conditions of use for this software and other general information at www.autosar.org and at AUTOSAR .
Supports many NXP processor families and offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
emWin the most efficient and comprehensive GUIs available. It is written in ANSI C and supports any display controller, display and CPU. emWin includes the AppWizard GUI design tool and a Simulation Environment to help speed your development.
emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems
emFile is an embedded file system which can be used with any type of storage device. A Microsoft Windows compatible FAT12/16/32 format, and a proprietary SEGGER EFS format are available. Support for NAND, NOR, SD, SDHC, MMC, eMMC, IDE, CompactFlash.
A fully verified Wi-Fi protocol stack complimented by powerful debug tools that assist to reduce development time. Together they form a complete ecosystem for the development of embedded Wi-Fi applications
ClarinoxBlue: a fully verified Bluetooth Classic, Bluetooth Low Energy and mesh protocol stack encapsulated within a C/C++ based framework & supported with debug tools to provide a complete development ecosystem.
MULTI is a complete Integrated Development Environment (IDE) for embedded applications for C/C++, Embedded C++ and includes an advanced debugger, profiler, run-time memory checking, project builder, editor, instruction set simulator, and more.
UDE is a debug, trace and test platform for a wide range of embedded systems. It supports the debugging of multicore targets within one consistent user interface. Run-time analysis and outstanding scripting capabilities are more key features.
A code generator that converts GUI model (built in Altia Design) into pure, production-ready C code. Each Altia DeepScreen target is carefully architected to take full advantage of the resources available on-chip.
A full-featured user interface design and model integration environment. With this GUI editor, users can build user interface models from scratch or import 2D and 3D graphic assets created by artists, test, and then prepare for code generation.
A Photoshop add-on that automatically transforms your artist's graphics into interactive, user-driven prototypes. Simply arrange and name your Photoshop graphics layers for buttons, screens and other user interface objects.
The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.
Hardware Emulation and Trace system for embedded development with NXP’s Power Architecture® devices featuring (i) Non-intrusive debugging, (ii) Full Instruction Trace and Data Trace, and (iii) Performance Analysis and Code Coverage Analysis
Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.
The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.
Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.
The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.
Small and thin ceramic resonators and crystals that offer high oscillation frequency and remarkable oscillation tolerance, not only for consumer but also automotive applications. http://www.murata.com/products/timingdevice